In recent times, additive manufacturing (AM) has proven to be an indispensable technique for processing complex 3D parts because of the versatility and ease of fabrication it offers. However, the generated microstructures show a high degree of complexity due to the complex solidification process of the melt pool. In this study, micromechanical modeling is applied to gain deeper insight into the influence of defects on plasticity and damage of 316L stainless steel specimens produced by a laser powder bed fusion (L‐PBF) process. With the statistical data obtained from microstructure characterization, the complex AM microstructures are modeled by a synthetic microstructure generation tool. A damage model in combination with an element deletion technique is implemented into a nonlocal crystal plasticity model to describe anisotropic mechanical behavior, including damage evolution. The element deletion technique is applied to effectively model the growth and coalescence of microstructural pores as described by a damage parameter. Numerical simulations show that the shape of the pores not only affects the yielding and hardening behavior but also influences the porosity evolution itself.
One ambitious objective of Integrated Computational Materials Engineering (ICME) is to shorten the materials development cycle by using computational materials simulation techniques at different length scales. In this regard, the most important aspects are the prediction of the microstructural evolution during material processing and the understanding of the contributions of microstructural features to the mechanical response of the materials. One possible solution to such a challenge is to apply the Phase Field (PF) method because it can predict the microstructural evolution under the influence of different internal or external stimuli, including deformation. To accomplish this, it is necessary to take into account plasticity or, specifically, non-homogeneous plastic deformation, which is particularly important for investigating the size effects in materials emerging at the micron length scale. In this work, we present quasi-2D simulations of plastic deformation in a face centred cubic system using a finite strain formulation. Our model consists of dislocation-based strain gradient crystal plasticity implemented into a PF code. We apply this model to study the influence of grain size on the mechanical behavior of polycrystals, which includes dislocation storage and annihilation. Furthermore, the initial state of the material before deformation is also considered. The results show that a dislocation-based strain gradient crystal plasticity model can capture the Hall-Petch effect in many aspects. The model reproduced the correct functional dependence of the flow stress of the polycrystal on grain size without assigning any special properties to the grain boundaries. However, the predicted Hall-Petch coefficients are significantly smaller than those found typically in experiments. In any case, we found a good qualitative agreement between our findings and experimental results.