The combined steam/dry reforming (S/DR) technology was used to produce syngas from clean biogas. In the reaction conditions proposed, the catalytic bed can produce, without deactivation, a syngas with a H2/CO ratio of ≈2 directly processable for methanol or Fischer–Tropsch syntheses. Starting from the laboratory data obtained in the industrial conditions, mass and energy balances for the overall process were obtained from Aspen HYSYS simulations. The environmental evaluation was performed by applying the life cycle assessment (LCA) methodology, comparing different scenarios to the current industrial route to produce syngas (autothermal reforming or ATR of natural gas). The analysis showed that clean biogas-to-syngas technology using reforming processes has the potential to reduce the anthropogenic impact on the environment. The ReCiPe method showed that when the combined S/DR process is conducted using clean biogas also as a heat source, the CO2 balance turns negative, ensuring that the whole process has excellent potential as carbon capture and utilization (CCU) technology providing the lowest damage in all categories. Its improvement would make it possible to further reduce the environmental burden of the overall process, which is essential for achieving sustainable development.
18 December 2024 in Angewandte Chemie International Edition
Electrochemical C−H oxidation reactions offer a sustainable route to functionalize hydrocarbons, yet identifying suitable substrates and optimizing synthesis remain challenging. Here, we report an integrated approach combining machine learning and large language models to streamline the exploration of electrochemical C−H oxidation reactions. Utilizing a batch rapid screening electrochemical platform, we evaluated a wide range of reactions, initially classifying substrates by their reactivity, while LLMs text‐mined literature data to augment the training set. The resulting ML models for reactivity prediction achieved high accuracy (>90 %) and enabled virtual screening of a large set of commercially available molecules. To optimize reaction conditions for selected substrates, LLMs were prompted to generate code that iteratively improved yields. This human‐AI collaboration proved effective, efficiently identifying high‐yield conditions for 8 drug‐like substances or intermediates. Notably, we benchmarked the accuracy and reliability of 12 different LLMs–including LLaMA series, Claude series, OpenAI o1, and GPT‐4‐on code generation and function calling related to ML based on natural language prompts given by chemists to showcase potentials for accelerating research across four diverse tasks. In addition, we collected an experimental benchmark dataset comprising 1071 reaction conditions and yields for electrochemical C−H oxidation reactions.
21 September 2021 in Reaction Chemistry & Engineering
Batch and continuous reactors both enable exploration of a chemical design space. The former rely on transient experiments, thus experiencing a wide variety of operating conditions over time, whereas the latter are usually operated at steady state and are representative of only one set of conditions. Operating a continuous reactor under dynamic conditions allows more efficient exploration of the underlying reaction space for extraction of kinetics and optimization of performance. We present a methodology to efficiently explore a design space using a tubular flow reactor installed on an automatic platform (equipped with FTIR and HPLC analysis) operated in a transient regime using sinusoidal variations of the parameters. This data-dense method proves to be quicker with respect to steady-state operations because of the larger amount of information collected during a single experiment. A computational analysis provides a simple criterion for the design of dynamic experiments in order for them to be representative of steady-state conditions. The methodology is applied experimentally to the synthesis of a pharmaceutical intermediate via an esterification reaction in the presence of base. In the experiments, up to three parameters (reaction time, base equivalents, and temperature) are changed simultaneously. Proper design of the trajectories in the design space allows verification of the consistency of the results by exploiting the self-crossings within each trajectory and crossings between different trajectories. The experiments further validate the developed criterion for dynamic operations.
11 May 2021 in Industrial & Engineering Chemistry Research
Plug flow behavior in tubular reactors is often highly desirable in industry, since it can ensure high productivity, good selectivity, and enhanced heat transfer. To achieve this, good radial mixing combined with poor axial mixing is required: these conditions are quite easy to obtain if the flow regime is turbulent, but they are much more challenging to achieve if the flow is laminar. In this work radial mixing and residence time distributions in a side-injected tubular reactor equipped with a series of Sulzer SMX static mixers were investigated using Computational Fluid Dynamics. It was found that even at low values of Reynolds number the reactor can efficiently satisfy the plug flow conditions, and operative diagrams were determined to foresee the reactor behavior.
The achievement of a homogeneous dispersion of nanoparticles is of paramount importance in supporting their technological application. In wet processing, stable dispersions were largely obtained via surfactant or surface functionalization: although effective, the use of dispersant can alter, or even impair, the functional properties of the resulting nanostructured systems. Herein, we report a novel integrated modeling and experimental approach to obtain stable ZrO2 nanoparticle (NP) dispersions at native dimensions (about 5 nm) in homogeneous ternary mixtures of solvents (i.e., water, ethanol, and 1,2-dichlorobenzene) without any further surface functionalization. A miscibility ternary diagram was computed exploiting the universal quasi-chemical functional-group activity coefficient (UNIFAC) model, which was then experimentally validated. Dynamic light scattering (DLS) on these mixtures highlights that nanometric structures, resembling nanoemulsion droplets, form close to the mixture two-phase boundary, with a size that depends on the ternary mixture composition. ZrO2–NPs were then synthesized following a classic sol–gel approach and characterized by XRD and Raman spectroscopy. ZrO2–NPs were dispersed in HCl and mixed with different mixtures of ethanol and 1,2-dichlorobenzene (DCB), obtaining homogeneous and stable dispersions. These dispersions were then studied by means of DLS as a function of DCB concentration, observing that the nanoparticles can be dispersed at their native dimensions when the mass fraction of DCB was lower than 60%, whereas the increase of the hydrophobic solvent leads to the NPs’ agglomeration and sedimentation. The proposed approach not only offers specific guidelines for the design of ZrO2–NPs dispersions in a ternary solvent mixture but can also be extended to other complex solvent mixtures in order to achieve stable dispersions of nanoparticles with no functionalization.