The use of a robotic arm manipulator as a platform for coincident radiation mapping and laser profiling of radioactive sources on a flat surface is investigated in this work. A combined scanning head, integrating a micro-gamma spectrometer and Time of Flight (ToF) sensor were moved in a raster scan pattern across the surface, autonomously undertaken by the robot arm over a 600 × 260 mm survey area. A series of radioactive sources of different emission intensities were scanned in different configurations to test the accuracy and sensitivity of the system. We demonstrate that in each test configuration the system was able to generate a centimeter accurate 3D model complete with an overlaid radiation map detailing the emitted radiation intensity and the corrected surface dose rate.
Radiation mapping, through the detection of ionising gamma-ray emissions, is an important technique used across the nuclear industry to characterise environments over a range of length scales. In complex scenarios, the precise localisation and activity of radiological sources becomes difficult to determine due to the inability to directly image gamma photon emissions. This is a result of the potentially unknown number of sources combined with uncertainties associated with the source-detector separation—causing an apparent ‘blurring’ of the as-detected radiation field relative to the true distribution. Accurate delimitation of distinct sources is important for decommissioning, waste processing, and homeland security. Therefore, methods for estimating the precise, ‘true’ solution from radiation mapping measurements are required. Herein is presented a computational method of enhanced radiological source localisation from scanning survey measurements conducted with a robotic arm. The procedure uses an experimentally derived Detector Response Function (DRF) to perform a randomised-Kaczmarz deconvolution from robotically acquired radiation field measurements. The performance of the process is assessed on radiation maps obtained from a series of emulated waste processing scenarios. The results demonstrate a Projective Linear Reconstruction (PLR) algorithm can successfully locate a series of point sources to within 2 cm of the true locations, corresponding to resolution enhancements of between 5× and 10×.
Laboratory and synchrotron X‐ray fluorescence (XRF) analysis has both served as mainstay rapid and quantitative elemental analysis techniques for decades, attaining parts per million sensitivities for the majority of elements. Formerly, XRF was the reserve of large X‐ray generating systems and national facilities. More recently, developments in miniaturized X‐ray generators and detectors have allowed for this nondestructive technique to be utilized for portable and in situ elemental characterization of materials, away from the confines of the laboratory. When combined with a robotic manipulator, these usually handheld systems present a powerful method for autonomous assessments of material composition for a wide range of nuclear characterization and decommissioning scenarios. In this study, we present a proof‐of‐concept XRF system integrated with a robotic manipulator to autonomously identify a suite of nuclear relevant materials. Such remotely deployable noncontact tools are crucial for use within hazardous environments where it may not be possible, for physical and safety reasons, for a human operator to manually undertake characterization tasks. It is envisaged that this robotically deployed XRF system will comprise part of the wider autonomous characterization “toolkit”; capable of extensive large‐area mapping alongside targeted compositional “point analysis.” The system was demonstrated to rapidly and repeatably derive accurate and precise compositional information of different test materials, autonomously on both flat and complex, object‐rich surfaces.