Stelian Stan

Prof. Stelian Stan


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2022 in Materials
Verified
Journal Article
Open access
PDF file
IRIulian Riposan
Iulian Riposan
ADAnca Denisa
Anca Denisa
SIStan Iuliana
Stan Iuliana
MCMihai Chisamera
Mihai Chisamera
SSStelian Stan
Stelian Stan
Ferritic high-Si ductile cast irons replace an unstable mixed ferrite-pearlite matrix with a unique combination of high elongation, strength and hardness (ideal for automotive drive train components) and resistance to oxidation and corrosion at high temperatures (automotive exhaust and turbocharger systems). The present paper analyses the graphite parameters of 4.5%Si, un-inoculated ductile cast iron (4.7%CE, 0.035%Mgres) as an effect of the casting section size. The structure is characterized by 10.5–11.2% graphite and 464–975 nodules/mm2, at more than 70% ferrite and no carbides, including at 3 mm wall thickness. The lower the wall thickness is, the higher the nodule count is and, consequently, the higher the ferrite amount is. The Roundness Graphite Shape Factor (RSF = 0.65–0.68) illustrates the presence of Slightly Irregular Spheroidal Graphite (Form V ISO 945). There is a big difference between the graphite nodularity evaluated according to ISO 16112:2017 [CGI] (NG1 = 79–86%) and according to ISO 945-4-2019 (DI) (NG2 = 65.2–74.6%), both of them based on RSF. Graphite Nodularity (NG3), calculated with the ISO 945-4-2019 [DI] formula, but replacing RSF with SSF, Sphericity Graphite Shape Factor, has an intermediary position. The higher the imposed minimum RSF or SSF is, the lower the Graphite Nodularity (NG4, NG5): 80–90% for min. 0.50 (minimum Form IV or Intermediate Graphite), 60–80% for min. 0.60–0.65 (minimum Form V graphite) and 35–70% for min. 0.80 (minimum Form VI graphite). The SSF is more representative than the RSF for Si-alloyed ductile cast iron, so it is recommended to use a graphite nodularity calculus considering SSF instead of the RSF formula (stipulated by ISO 945-4-2019), with SSF replacing RSF.

1 May 2008 in Materials Science and Technology
Verified
Journal Article
Closed access
IRIulian Riposan
Iulian Riposan
MCM. Chisamera
M. Chisamera
SSStelian Stan
Stelian Stan
PTP. Toboc
P. Toboc
CEC. Ecob
C. Ecob
DWD. White
D. White
Laboratory research has been conducted to investigate the effect of strong deoxidising elements such as Al, Zr or Ti in preconditioning of uninoculated and inoculated grey irons. Experimental heats were performed in an acid lined crucible induction furnace at 3˙7–3˙9% carbon equivalent, 5˙5–6˙5 Mn/S ratio and, <0˙005%Al and Ti. The content of 0˙027–0˙028%Al, 0˙011–0˙017%Ti or 0˙011–0˙013%Zr was obtained in preconditioned irons. Not only inoculation but also the preconditioning of the base iron has a strong effect on the solidification pattern. Preconditioning led to an improved level measuring the most significant temperatures of cooling curves and resulted in a positive trend of eutectic and of the end of solidification representative parameters, in both uninoculated and inoculated irons. A foundry case study is represented to illustrate the efficiency of Al and Zr bearing FeSi preconditioning of electrically melted, inoculated grey iron: decreasing the eutectic undercooling and recalescence, improved graphite characteristics, avoiding carbides, increased tensile strength, while heat treatment was eliminated, for 5 mm sections castings.

12 August 2020 in Metals
Verified
Journal Article
Open access
PDF file
IRIulian Riposan
Iulian Riposan
ESEduard-Marius Stefan
Eduard-Marius Stefan
SSStelian Stan
Stelian Stan
NPNicoleta Roxana Pana
Nicoleta Roxana Pana
MCMihai Chisamera
Mihai Chisamera
Previous experiments pointed out that the deviation using a sphere as reference of graphite particles is noticeably increased by Si-alloying, with inoculation as a possible beneficial effect. The main objective of the present work is to evaluate the effects of commercial inoculants (Ca/Ca, Ba/Ca, RE-FeSi alloys) on 4.5%Si ductile iron, thin wall castings. FeSiMgRE treated iron (0.032–0.036%Mgres) is in-mold inoculated (a four-work-positions pattern). A complex chemical composition is obtained for each inoculation variant. Wedge casting W3 (ASTM A 367) is used to evaluate structure characteristics at different wall thickness (3–15 mm). Minimum and maximum size, area, nodule count, and representative graphite shape factors are evaluated. Roundness (including AG and Fmax) at 0.6–0.8 level illustrates the common formation of slightly irregular spheroidal graphite (Type V, ISO 945). Ca, RE-FeSi inoculation leads to the highest level of real perimeter and, consequently, to the lowest level of Sphericity. Ca, Ba-FeSi inoculation appears to be better than simple Ca-FeSi for improving graphite parameters, while Ca, RE-FeSi has the lowest beneficial effect, especially as it negatively affects the compactness degree of graphite particles. A two-step liquid treatment using RE-bearing FeSiCaMg master alloy and Ca, Ba-FeSi inoculant appears to be a solution to improve graphite parameters for high-Si ductile irons solidified in thin wall castings.

7 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
ADAnca Denisa
Anca Denisa
SIStan Iuliana
Stan Iuliana
IRIulian Riposan
Iulian Riposan
SSStelian Stan
Stelian Stan
In recent years, high-Si ductile cast irons (3–6% Si) have begun to be used more and more in the automotive and maritime industries, but also in wind energy technology and mechanical engineering. Si-alloyed ferrite has high strength, hardness and oxidation and corrosion resistance, but it has low ductility, toughness and thermal conductivity, with graphite as an important influencing factor. In this study, 4.5% Si uninoculated ductile iron solidified in thin wall castings (up to 15 mm section size) via a permanent (metal) mold versus a sand mold, was evaluated. Solidification in a metal mold led to small size, higher graphite particles (less dependent on the section size). The graphite particles’ real perimeter was 3–5% higher than the convex perimeter, while the values of these parameters were 41–43% higher in the sand mold. Increasing the casting section size led to an increased graphite perimeter, with it being much higher for sand mold. The graphite particles’ shape factors, involving the maximum and minimum size, were at a lower level for metal mold solidification, while by involving the difference between Pr and Pc, is higher for the metal mold. The shape factor, including the graphite area and maximum size, had higher values in the metal mold, sustaining a higher compactness degree of graphite particles and a higher nodularity regarding metal mold solidification (75.5% versus 67.4%). The higher was due to the graphite compactness degree level (shape factor increasing from 0.50 up to 0.80), while the lower was due to the graphite nodularity for both the metal mold (39.1% versus 88.5%) and the sand mold (32.3% versus 83.1%). The difference between the metal mold and sand mold as the average graphite nodularity increased favored the metal mold.

16 September 2019 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Closed access
PDF file
ACAna Maria Cojocaru
Ana Maria Cojocaru
IRIulian Riposan
Iulian Riposan
SSStelian Stan
Stelian Stan

7 January 2023 in International Journal of Metalcasting
Verified
Journal Article
Closed access
PDF file
IRIulian Riposan
Iulian Riposan
SSStelian Stan
Stelian Stan
DADenisa Anca
Denisa Anca
ESEduard Stefan
Eduard Stefan
ISIuliana Stan
Iuliana Stan
MCMihai Chisamera
Mihai Chisamera