The technique of numerical analysis of three-dimensional tomographic images of the pore space of soil objects has been used in this paper. It applies methods of integral geometry, topology and morphological analysis. To characterize quantitatively the transformation of the pore space structure, tomographic images of four undisturbed soils were analyzed, i.e., heavy loamy agro-gray soil (Retic Phaeozem), agromineral (Sapric Rheic Mineralic Histosols), and hypnum (brown moss Sapric Rheic Histosols) peat soils in dry and wet conditions. For samples of the subplow horizon in agro-gray soil, a decrease in both Betty numbers was observed on wetting, where the zero number ( b0 ) stands for the amount of topologically simple closed pores, and the first number ( b1 ) indicates a decrease in pore connectivity, which varies in a narrower range of pore sizes as compared to b0 . When a sample of agromineral peat soil is moistened, the Euler–Poincaré characteristic is negative in the pore range of 0.1–0.16 mm, which points to the predominating complicated branched structure of the pore space and high pore connectivity. When hypnum moss is saturated, a lot of tunnel pores get narrower (“collapse”), and the connectivity decreases due to the structural specifics of long-stemmed plant residues. The number of pores and connections between them in peat soils is an order of magnitude higher than those in the subplow horizon A of the agro-gray soil. The provided quantitative changes in the considered parameters of tomographic images of the soil pore space confirm the possibility of applying them for estimating the transformation of the pore space in soils.
We present a methodology for a numerical analysis of three-dimensional tomographic images in this paper. The methodology is based on integral geometry, topology, and morphological analysis methods. It involves calculating cumulative and non-cumulative pore size distributions of Minkowski functionals and Betti numbers. We investigated 13 samples in dry and wet (saturated beyond the field capacity) conditions within different horizons of the Phaeozem albic. For samples of the arable horizon, an increase in the Euler characteristic was observed in the process of wetting. For samples from the A2, AB and B2 horizons, the Euler-Poincare characteristic decreased during wetting. It has been proven that both Betti numbers (number of isolated pores and number of “tunnels”) decrease with swelling of the AB and B2 horizons at a depth of 20–90 cm. For samples from the arable horizon, another dependence was observed: A Betti number of zero increased first but decreased during wetting. Based on the change in topological characteristics, two methods of changing the topology of the void space of the soil were demonstrated. The above-described quantitative changes of proposed parameters of pore space tomographic images prove the possibility and progressiveness of their usage for the pore space transformation estimate.
Rapid assessment of salinity based on the electrical conductivity of the liquid phase of the soil is widely used throughout the world. However, the results of such an assessment strongly depend on the soil–water relationship, while the known salinity standards based on electrical conductivity are proposed for a soil solution in the state of soil water saturation (full moisture capacity). Thus, a serious underestimation of the degree of salinity may occur when studying water extracts (suspensions) with an obviously higher soil–water ratio compared to the state of full moisture capacity. In this regard, the purpose of the study was to compare the GOST methodology in Russia with a soil–water ratio of 1 : 5 and the classical Richards method with the assessment of the electrical conductivity of the soil solution in a water-saturated state using the example of arid soils of different genesis and dispersion of the Republic of Uzbekistan. In contrast to well-known works on the empirical assessment of the influence of the soil–water relationship on the conductometric assessment of salinity, we applied the fundamental theory of dilution to justify the reduction of the results to a standard state of water saturation and the possibility of using the international classification of soils according to the degree of salinity. The results showed satisfactory agreement between the experimental data and the theory of solution dilution in the range of electrical conductivity values up to 30–35 dS/m, that is, up to a gradation of a very strong degree of salinity according to the international classification. Deviations from the theory can be explained by the nonlinearity of the dependence of electrical conductivity on the concentration of electrolytes and the immobilization of ions by the solid phase and thin pores, as well as a higher yield of electrolytes into solution at high dilution compared to the standard state of water saturation.
Structure of the pore network of the soil controls many processes in the soil. Soil moistening have a profound impact on soil structure, which may affect a soil functions. This dataset presents the non-destructive three-dimensional (3D) visualization of the same soil sample under two different saturation conditions: air-dried and saturated beyond the field capacity [1]. The data were obtained by X-ray computed tomography and stored as three-dimensional 8-bit grayscale arrays. Two reconstructed images of the same sample were produced for future research. This dataset provides a valuable and unique insight for the qualitative and quantitative analysis.
A loamy soil with a high salt content containing mainly sodium cations and sulfate anions has a loose topsoil and is susceptible to air and water erosion. Covering the soil with sand mulch followed by treatment with heterofunctional polysaccharide xanthan gum or non-ionic synthetic polyvinyl alcohol results in the formation of mechanically stable coatings over the sand mulch layer. Mulching saline soils with sand followed by treatment with polymers is a promising method for creating protective anti-erosion coatings.
The article presents the results of a two-year experiment aimed at evaluating the effectiveness of 6-benzylaminopurine in reducing the negative effects of soil salinity on winter wheat and winter barley plants. Foliar treatment with 6-benzylaminopurine was applied to winter wheat and winter barley grown on irrigated lands of Karakalpakstan. According to the results of the 2023–2024 experiment, the use of this compound improved spike weight and the average grain weight per spike in the studied crops. The field experiment conducted in 2024–2025 showed that treatment of winter wheat and winter barley with phytohormones enhanced both total and productive tillering, which was reflected in increased yields of the studied crops: 14% for winter wheat and 9% for winter barley.