Poly (vinylidene fluoride) membranes were prepared by freeze-casting. The effects of PVDF concentration, and freezing temperature on the morphology, crystallization, and performance of prepared membranes were examined. Polymer concentration was varied from 10 to 25 wt%. The freezing temperature was varied from −5 to −25 °C. Dimethyl sulfoxide (DMSO) and distilled water were used as solvents and non-solvents, respectively. The first step of this study was devoted to estimating the optimal concentration of PVDF solution in DMSO. Membranes prepared at different ratios were characterized using physical and mechanical characteristics and porosity. The second step was to optimize the time required for the production of the membranes. In the third step, it was shown that the freezing temperature had a remarkable effect on the morphology of the membranes: as the temperature decreases, there is a transition from spherulite structures to interconnected pores. It was shown that the diversity in the pore pattern for PVDF affects remarkably the water permeability through the polymer membrane. During the monitoring of the spread of crystallized areas during the formation of the membrane, it was found that the crystallization of the solvent begins at localized points of the microscale, further crystallized areas spread radially or unevenly along the surface of the solution, forming contact borders, which can lead to changes in the properties of the membrane in its area.
In aqueous solution, the cationic polymers poly(diallyldimethylammonium chloride) and poly-L-lysine hydrobromide are electrostatically adsorbed onto anionic polystyrene microspheres, which are used as a model of microplastics. The adsorbed polymers are able to migrate between the particles, resulting in a uniform distribution of macromolecules over all particles in the system. Interparticle migration should be taken into account when discussing the spread of toxicants associated with micron-sized vectors.
A comparative investigation of the antimicrobial activity of a cationic polymer [poly(diallyldimethylammonium chloride)], model microplastics consisting of anionic butadiene-α-methylstyrene copolymer microspheres, and electrostatic polymer-microsphere complexes was undertaken. The polymer demonstrates a high antimicrobial activity towards gram-positive bacteria S. aureus and gram-negative bacteria E. coli, the microspheres being practically inert, while the activity of complexes is comparable with the activity of polycation at the same concentration. This means that microplastic particles loaded with toxic substances have a significant negative impact on microorganisms in aquatic environment.
A loamy soil with a high salt content containing mainly sodium cations and sulfate anions has a loose topsoil and is susceptible to air and water erosion. Covering the soil with sand mulch followed by treatment with heterofunctional polysaccharide xanthan gum or non-ionic synthetic polyvinyl alcohol results in the formation of mechanically stable coatings over the sand mulch layer. Mulching saline soils with sand followed by treatment with polymers is a promising method for creating protective anti-erosion coatings.
One of the negative consequences of the impact of adverse environmental factors on on a humans is the development of oxidative stress in the body, which causes deviations in the state of human health. An important role in the fight against oxidative processes is played by antioxidants, including ascorbic acid (AA). Along with food, biologically active additives (BAA) can be an additional source of AA intake into the body. The correct assessment of the AA content in pharmaceutical preparations helps to solve an important problem of food ecology - the balanced use of vitamin C. Therefore, the development of new and improvement of existing methods of analysis for determining the content of AA in various objects remains an urgent task. The use of instrumental methods for fixing the end point of the titration increases the accuracy of the analysis. Simple and economical electrochemical methods such as potentiometry and coulometry can be used to implement the iodometric titration method. Despite all the advantages of coulometric and potentiometric methods of analysis and their widest distribution in various fields of science and technology, there are no data in the literature on the pussihilily of implementing the coulometric determination of AA with potentiometric indication and direct potentiometric titration, which are based on the reaction with iodine. As a result of the study, it was found that in the determination of AA by both methods, well-repeated results were obtained (the relative standard deviation does not exceed 2.0%), the dependence of the analytical signal on the sample mass (in the range of 80-120% to standard weight 0,1 or 0,2 g depending on the method) is linear with R not less than 0.99, and the results obtained by the "introduced-found" method satisfy the requirement of correctness.