Begoña Peceño

Dr. Begoña Peceño

Universidad Católica del Norte, Antofagasta, Chile
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2021 in Science of The Total Environment
Verified
Journal Article
Closed access
BPBegoña Peceño
Begoña Peceño
BAB. Alonso-Fariñas
B. Alonso-Fariñas
LVL.F. Vilches
L.F. Vilches
CLC. Leiva
C. Leiva

1 June 2019 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
BPBegoña Peceño
Begoña Peceño
CACelia Arenas
Celia Arenas
BABernabé Alonso-Fariñas
Bernabé Alonso-Fariñas
CLCarlos Leiva
Carlos Leiva
Most of the aggregates in construction material come nowadays from the quarrying of natural resources, and their consumption tends to rise. The aim of this study was to evaluate the total substitution of traditional natural coarse aggregates with alternative, renewable resources, such as mollusk shell waste from the aquaculture industry, to manufacture a recycled porous concrete and its possible use in sound-absorbing barriers for road traffic. Two different shells, separately or as a mix, were used in this research work: Peruvian scallop and Mediterranean mussel. In addition, two different particle size distributions, smaller than 2 mm and between 2 and 7 mm, were used. Acoustic absorption, open porosity, density, mechanical resistance to compression and bending, and resistance to freeze-thaw cycles, along with leaching properties, were studied. The results revealed that specimens formed using any kind of mollusk shell waste with a particle size between 2 and 7 mm exhibited a 40% increase weighted acoustic absorption coefficient over porous concrete specimens made with river gravel. For particles of the same size, the acoustic absorption assessment index showed absorption over 4 dB in 12-cm thickness. In addition, the mechanical properties analyzed showed better values in all specimens made with shell waste than in conventional porous concrete specimens. In the specimens manufactured of mollusk shell waste with a particle size between 2 and 7 mm, compression strength was twice that of conventional porous concrete.

2 July 2020 in Processes
Verified
Journal Article
Open access
PDF file
BPBegoña Peceño
Begoña Peceño
carlos Leivacarlos Leiva
carlos Leiva
Bernabé Alonso-FariñasBernabé Alonso-Fariñas
Bernabé Alonso-Fariñas
AGAlejandro Gallego-Schmid
Alejandro Gallego-Schmid
Waste recycling is an essential part of waste management. The concrete industry allows the use of large quantities of waste as a substitute for a conventional raw material without sacrificing the technical properties of the product. From a circular economy point of view, this is an excellent opportunity for waste recycling. Nevertheless, in some cases, the recycling process can be undesirable because it does not involve a net saving in resource consumption or other environmental impacts when compared to the conventional production process. In this study, the environmental performance of conventional absorption porous barriers, composed of 86 wt % of natural aggregates and 14 wt % cement, was compared with barriers composed of 80 wt % seashell waste and 20 wt % cement through an attributional cradle-to-grave life cycle assessment. The results show that, for the 11 environmental impact categories considered, the substitution of the natural aggregates with seashell waste involves higher environmental impacts, between 32% and 267%. These results are justified by the high contribution to these impacts of the seashell waste pre-treatment and the higher cement consumption. Therefore, the recycling of seashells in noise barrier manufacturing is not justified from an environmental standpoint with the current conditions. In this sense, it could be concluded that life cycle assessments should be carried out simultaneously with the technical development of the recycling process to ensure a sustainable solution.

8 July 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
BPBegoña Peceño
Begoña Peceño
JBJosé Antonio Bakit
José Antonio Bakit
NCNiris Cortes
Niris Cortes
Bernabé Alonso-FariñasBernabé Alonso-Fariñas
Bernabé Alonso-Fariñas
EBEnzo Bonilla
Enzo Bonilla
carlos Leivacarlos Leiva
carlos Leiva
The construction industry’s high demand for natural resources, combined with the waste generated by agriculture, creates an opportunity for the circular economy. This experiment used the CaCO3 found in scallop shells as an ingredient for the manufacture of fire-resistant materials, replacing gypsum in compositions of 40% and 50% by weight. The mechanical compressive strength was estimated for both freeze-thaw cycles and acid and sulfate attacks. The cost of disposing of scallop shell waste in landfills, savings from substitution, and the payback period relative to the amount of production were determined. The compressive strength of the materials decreased by 80% when subjected to freeze-thaw cycles and sulfate attack. In response to acid attack, they showed a 100% increase in strength during the first three weeks and a decrease thereafter. The savings amounted to $46.36 (22.4%) for 40% replacement and $58.93 (28.4%) for 50%. Respectively, return on investment is achieved at 800- and 630-per-metric ton produced. The difference between the costs of waste disposal (in aquaculture) and the potential savings from using CaCO3 as a raw material (in construction) creates an opportunity for commercialization between the two industries, serves as a reference for decision-makers, and complies with circular economy principles, reducing both inputs of raw materials and outputs of waste.

15 April 2024 in Materials
Verified
Journal Article
Open access
PDF file
BPBegoña Peceño
Begoña Peceño
YGYolanda Luna Galiano
Yolanda Luna Galiano
FVFabiola Varela
Fabiola Varela
Bernabé Alonso-FariñasBernabé Alonso-Fariñas
Bernabé Alonso-Fariñas
carlos Leivacarlos Leiva
carlos Leiva
The recycling of fly ash from municipal solid waste incineration is currently a global issue. This work intends to examine the viability of a novel recycling alternative for fly ashes as a component of fire-resistant plates. To lessen the quantity of heavy metal leaching, the fly ash was utilized after being washed using a water/fly ash ratio of 2 for one hour. Subsequently, an inexpensive, straightforward molding and curing process was used to create a plate, with a composition of 60%wt of MSWI-FA, 30%wt of gypsum, 0.5%wt of glass fiber and 9.5%wt of vermiculite. The plate exhibited high fire resistance. Furthermore, it demonstrated compression, flexural strength and surface hardness slightly lower than the requirements of European Standards. This allows for manufacturing plates with a high washed MSWI-FA content as fire protection in firewalls and doors for homes and commercial buildings. A Life Cycle Assessment was carried out. The case study shows that a 60% substitution of gypsum resulted in an environmental impact reduction of 8–48% for all impact categories examined, except four categories impacts (marine eutrophication, human toxicity (cancer), human non-carcinogenic toxicity and water depletion, where it increased between 2 and 718 times), due to the previous washing of MSWI-FA. When these fly ashes are used as a raw material in fire-resistant materials, they may be recycled and offer environmental advantages over more conventional materials like gypsum.

3 October 2022 in Journal of Technology and Science Education
Verified
Journal Article
Open access
PDF file
BPBegoña Peceño
Begoña Peceño
LMLaia Lluch Molins
Laia Lluch Molins
EPEnzo Bonilla Pérez
Enzo Bonilla Pérez
JBJosé Antonio Bakit
José Antonio Bakit
NPNiris Cortés Pizarro
Niris Cortés Pizarro
In 2020, in the context of the COVID-19 pandemic, it is of interest to understand how students perceived the access, use, and utility of digital tools in online teaching. This study provides an insight into the needs of students in adjusting to online teaching.This study presents the methodological design of the course “Industrial Hygiene I,” part of a technology-based engineering bachelor’s degree from Universidad Católica del Norte (Chile). Once the theoretical framework was established, three surveys were designed throughout the course to measure students’ perceptions of the access, use, and utility of digital tools used in online teaching during the pandemic. Thirty-five students participated in this quantitative study.Following a data analysis, it was observed that 46% of students use their cell phones to access virtual classes and more than 50% are dissatisfied with the internet connection; therefore, it was necessary to adapt the learning methodology. After that, more than 50% of the students said that they preferred a flipped classroom over traditional methodology. In addition, the quality of the course was not affected by using the internet (60%), and the methodology generates advantages in terms of learning (72%).These findings have several implications in both the design of different subjects in the engineering degree and the practice of different learning methods. Future hybrid teaching designs require taking up the challenges of both improving technology-supported teaching and assessing competence in the same context.