The main sources of greenhouse gas emissions and air pollution from the transport sector are diesel- and gasoline-powered passenger cars. The combustion of large amounts of conventional fuels by cars contributes to a significant release of various compounds into the atmosphere, such as solid particles, nitrogen oxides, carbon monoxide, and carbon dioxide. In order to reduce these pollutants in places of their high concentration (especially in urban agglomerations), the use of ecological means of transport for daily driving is highly recommended. Electric vehicles (EV) are characterized by ecological potential due to their lack of direct emissions and low noise. However, in Poland and many other countries, electricity production is still based on fossil fuels which can significantly influence the indirect emissions of carbon dioxide into the atmosphere associated with battery charging. Thus, indirect emissions from electric cars may be comparable or even higher than direct emissions related to the use of traditional cars. Therefore, the aim of the work was to analyze the amount of carbon dioxide emissions associated with the use of electric vehicles for daily driving (City, Sedan, SUV) and their impact on the environment on a local and global scale. Based on the assumed daily number of kilometers driven by the vehicle and the collected certified catalog data (Car Info Nordic AB), the direct emissions generated by the internal combustion engines (ICE) were calculated for specific cars. These values were compared to the indirect emissions related to the source of electricity generation, for the calculation of which the CO₂ emission coefficient for a particular energy source and energy mix was used, as well as reference values of electricity generation efficiency in a given combustion installation, in accordance with the KOBiZE (The National Centre for Emissions Management) and European Union regulation. Indirect emissions generated from non-renewable fuels (lignite, hard coal, natural gas, diesel oil, heating oil, municipal waste) and renewable emissions (wind energy, solar energy, hydro energy, biomass, biogas) were considered. The results indicated that for the Polish case study, indirect carbon dioxide emission associated with the daily driving of EV (distance of 26 km) ranges 2.49–3.28 kgCO₂∙day⁻¹. As a result, this indirect emission can be even higher than direct emissions associated with ICE usage (2.55–5.64 kgCO₂∙day⁻¹).

Converting raw biomass into valuable products protects the environment, improves economics, and helps tackle climate change by cutting resource demand and waste production. Thermochemical treatment is a common method for producing biochars, hydrochars and torreficates from biomass and organic wastes, which can also generate dioxins and furans and consequently limit the use of thermochemically converted chars. Here we review the presence of dioxins and furans in chars produced by hydrothermal carbonization, torrefaction, and pyrolysis processes under the influence of temperature, residence time, heating rate, pressure, and feedstock type. Dioxins and furans were mostly below 20 ng total toxic equivalence per kilogram (TEQ kg ⁻¹ ), with the highest level of 113 ng TEQ kg ⁻¹ found in over 100 samples of different char types. The most toxic products were hydrochars produced from sewage sludge. Processing temperature and feedstock type were key factors resulting in high dioxin levels in chars, and care should be taken when producing chars at temperatures up to 300 °C or using feedstocks previously contaminated with dioxins or preservatives.

Soil and air pollution are main problems posing a serious threat to human health. Traditional physical and chemical soil remediation methods affect the soil ecosystem and are rather costly. Since the main purpose of soil remediation is not only to remove pollutants but also to restore soil health, the method of phytoremediation is becoming extremely relevant. Phytoremediation is an environmentally friendly and natural process of removing pollutants from the environment. Cleaning up contaminated sites and enabling re-use without harming future users requires the implementation of environmentally friendly and economically attractive technologies. Phytoremediation does not adversely affect the structure and biological life of the soil. Concerning on-site cleaning in situ. Hyperaccumulator plants can accumulate heavy metals from the soil, which is the so-called phytoextraction. The ability of trees and shrubs to effectively remove solid particles from the air has also been proven. However, it is not always possible to grow large plants in polluted areas. Therefore, the main goal of the research was to explore previous studies on the phytoremediation capability of herbaceous plants, in particular, their phytoextraction capacity. Another major issue was to study the main methods of improving plant phytoextraction. The results obtained show that grass can be a good solution for natural ecosystem cleanup. It is also necessary to pay attention to the impact of phytoextraction-improving substances on soil health.

A large portion of food loss and waste (FSL) is comprised of seeds and stones. Exotic fruits such as mangoes, lychees and avocados, in which the seeds account for a significant part of the weight and volume of the entire product, are most affected by this problem. The seeds contain a large quantity of polyphenols and essential nutrients, which makes them a good material for extraction. However, conventional extraction techniques are considered time-consuming, and therefore significantly limit their use on an industrial scale. An alternative method of managing the seeds may be their energy utilization. In this study, torrefaction was proposed as a method for the valorization of exotic fruit seeds (mango, lychee, avocado). Thus, the influence of torrefaction temperature (200–300 °C) on the physical-chemical properties of substrates was investigated. The obtained results revealed that, in relation to the unprocessed raw materials, the torreficates are characterized by improved hydrophobic properties (all materials are classified as extremely hydrophobic), higher heating value (at 300 °C the values increased from 17,789 to 24,842 kJ∙kg⁻¹ for mango, from 18,582 to 26,513 kJ∙kg⁻¹ for avocado, and from 18,584 to 25,241 kJ∙kg⁻¹ for lychee), higher fixed carbon content (which changed from 7.87–15.38% to 20.74–32.47%), and significant mass loss, by 50–60%. However, as a side effect of thermal treatment, an increase in ash content (approx. 2–3 times but still less than in coal) was observed. Therefore, the torreficates may be competitive with coal. The possibility of using residues from the food processing sector as a substrate for energy purposes is important from the point of view of environment protection and is a part of the functioning of the circular economy.

Briquetting is one of the recommended biomass agglomeration processes. The material subjected to briquetting gains valuable functional features related to higher energy density, appropriate moisture content, and increased bulk density. However, the briquettes need high mechanical durability to maintain high quality during transportation, loading, and other logistic steps before they will be delivered to the final consumer and utilized for energy purposes. The mechanical durability depends on many factors, including the particles comminution of the compacted biomass. Therefore, the aim of this study was to analyze the impact of particle comminution on the mechanical durability of wheat straw briquettes. The research was carried out in accordance with the international standard for solid biofuels PN-EN ISO 17831-1:2016-02. The briquettes were produced from three different fractions: 0–2 mm, 2–15 mm, and 15–45 mm. To obtain more data related to the mechanical durability of briquettes, the tests were also carried out outside the ISO standard conditions. During the investigations, the working chamber operation time was extended from 5 to 60 min, and the rotational speed of the working chamber was increased to 25 and 30 rpm, respectively. The results indicated that the mechanical durability index (Du) of briquettes decreases along with the increase in the particle size. According to the PN-EN ISO 17831-1:2016-02 standard, the highest mechanical durability was achieved for the 0–2 mm fraction (Du = 91.17%) followed by the 2–15 mm fraction (Du = 88.12%), and the lowest was achieved for the 15–45 mm fraction (Du = 84.48%). It was noticed that the increase in the working chamber operation time resulted in a decrease of the Du value. Moreover, the difference in mechanical durability (between t₅ = 5 min and t₆₀ = 60 min) was greater for a larger fraction (∆Du = 16.26% for 0–2 mm fraction, ∆Du = 21.04% for 2–15 mm fraction, and ∆Du = 23.43% for 15–45 mm fraction). It was also observed that the increase of the rotational speed of the working chamber caused a slight decrease in the value of the mechanical durability of briquettes for all investigated fractions.

Due to the tendency for excessive moisture adsorption by raw, unprocessed biomass, various methods of biomass valorization are in use, allowing for the improvement of physical–chemical biomass properties, including hydrophobicity. One of the methods is torrefaction, which changes the hydrophilic properties of the biomass to hydrophobic. Therefore, in this study, the influence of the torrefaction temperature and the exposure time to moisture adsorption conditions on the hydrophobic properties of waste biomass from the agri-food industry (lemon peel, mandarin peel, grapefruit peel, and butternut-squash peel) were analyzed. The torrefaction was carried out at the following temperatures: 200, 220, 240, 260, 280, 300, and 320 °C. The hydrophobic properties were determined by using the EMC (Equilibrium Moisture Content) method, conducting an experiment in the climatic chamber at atmospheric pressure, a temperature of 25 °C, and relative humidity of 80%. The total residence time of the material in the climate chamber was 24 h. It was shown that the torrefaction process significantly improves the hydrophobic properties of waste biomass. Concerning dried raw (unprocessed) material, the EMC (24 h) coefficient was 0.202 ± 0.004 for lemon peels, 0.223 ± 0.001 for grapefruit peels, 0.237 ± 0.004 for mandarin peels, and 0.232 ± 0.004 for butternut squash, respectively. After the torrefaction process, the EMC value decreased by 24.14–56.96% in relation to the dried raw material, depending on the type of organic waste. However, no correlation between the improvement of hydrophobic properties and increasing the torrefaction temperature was observed. The lowest values of the EMC coefficient were determined for the temperatures of 260 °C (for lemon peel, EMC = 0.108 ± 0.001; for mandarin peel, EMC = 0.102 ± 0.001), 240 °C (for butternut-squash peel, EMC = 0.176 ± 0.002), and 220 °C (for grapefruit peel, EMC = 0.114 ± 0.008). The experiment also showed a significant logarithmic trend in the dependence of the EMC coefficient on the operating time of the climatic chamber. It suggests that there is a limit of water adsorption by the material and that a further increase of the exposure time does not change this balance.