Yujie Chen

Dr. Yujie Chen


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2022 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
YCYujie Chen
Yujie Chen
GSGe-Ge Song
Ge-Ge Song
KLKong Ling
Kong Ling
BYBo Yu
Bo Yu
DSDongliang Sun
Dongliang Sun
WTWenquan Tao
Wenquan Tao
In this paper, based on a reasonable nucleus site density model and considering conjugate heat transfer, the coupled volume-of-fluid and level set method is adapted to study subcooled flow boiling in an inclined three-dimensional rectangular mini-channel (0-180{degree sign}) with a characteristic size of 1.0 mm at a low flow rate of 88.8 kg∙m-2∙s-1. The inclination angle is found to have a slight effect on the boiling of the flow. A bubbly flow appears when a heat flux of 300 kW/m2 is added. An unconventional impact force is exerted on larger bubbles because of the reduction in liquid flow area in the downstream region of the mini-channel. This causes large bubbles to slip along the heating wall, with slight differences in the flow pattern under different inclination angles. When the inclination angle is close to 0{degree sign}, the upstream small/medium bubbles leave the heating wall under gravitational effects, which is conducive to heat transfer. As the inclination angle approaches 90{degree sign}, gravity pushes the large bubbles downstream to leave the channel, favoring the rewetting of the dry patches below. These two positive effects begin to fail as the inclination angle approaches 180{degree sign}, leading to slightly worse overall heat exchange efficiency. However, the maximum differences in the average and local wall superheating of the mini-channel are only 8.4% and 20.1%, respectively, across the range of inclination angles because the flow pattern remains similar under the effect of the impact force.

1 December 2023 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
YCYujie Chen
Yujie Chen
MJMingyang Ji
Mingyang Ji
BGBo Gao
Bo Gao
Bohong WangBohong Wang
Bohong Wang
WLWei Li
Wei Li
BYBo Yu
Bo Yu
Bubble nucleation is the initial stage of flow boiling and plays an important role in boiling heat transfer. However, bubble nucleation occurs at a microscopic scale, rendering it challenging for the macroscopic computational fluid dynamics method to realistically simulate this intricate process. In this paper, based on the coupled volume-of-fluid and level set method, a heterogeneous nucleation model is improved and conducted to simulate the subcooled flow boiling in a rectangular mini-channel, considering these conditions both in the presence and absence of a microlayer. The coefficient of the original heterogeneous nucleation model is adjusted across a range from 0.1 to 10.0 times its previous value to establish multiple new nucleation models for illustrating their effects on flow patterns and heat transfer characteristics. For flow boiling without a microlayer, when the coefficient of the original heterogeneous nucleation model is halved, the nucleate boiling intensity upstream of the channel diminishes, resulting in a reduction in the heat transfer coefficient. Nevertheless, this alteration mitigates the formation of slug flow and the appearance of dry patches near the channel outlet, consequently averting a sharp increase in outlet wall superheat. Quantitatively, relative differences of 23.83% and 90.48% in average and local maximum wall superheat are observed, respectively. In contrast, the presence of a very thin microlayer beneath the growing and slipping bubble in flow boiling with a microlayer is notable. This microlayer quickly evaporates, dissipating more than 77% of the input heat flux and substantially expanding the bubble volume. Consequently, under identical wall superheat conditions, the influence of variations in the number of activated bubbles induced by different heterogeneous nucleation models on heat transfer and flow patterns in flow boiling is significantly attenuated. Specifically, when the difference in nucleus site density remains within a tenfold range, the differences in the average and maximum wall superheat are limited to just 16.78% and 33.86%, respectively. Concerning flow boiling in a mini-channel featuring a microlayer, the simulation results verify that large deviations in the activated bubble number have few effects on the flow pattern and wall superheat, greatly reducing heterogeneous nucleation model requirement and promoting the numerical study of flow boiling.

1 March 2024 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
YCYujie Chen
Yujie Chen
JGJunhua Gong
Junhua Gong
WLWei Lu
Wei Lu
Bohong WangBohong Wang
Bohong Wang
DSDongliang Sun
Dongliang Sun
WTWenquan Tao
Wenquan Tao
The interface tends to behave as a circular shape under the effect of surface tension in the two-dimensional two-phase fluid flow. In this study, based on the coupled volume-of-fluid and level set (VOSET) method, an accurate circle-based interface reconstruction (CIR) algorithm for structured meshes is proposed, which features a straightforward implementation procedure. A portion of the standard circle is employed to approximate the curve interface, without the need for complex classification, coordinate transformation, and equation transformation. The radius of this circle is computed simply by the curvature and signed distance at the mixed cell center, and the center of this circle is determined using a straightforward dichotomy method under the mass conservation constraints. Results indicate that the coupled VOSET and CIR (VOSET-CIR) method maintains superior computational accuracy in the signed distance, interface curvature, and dynamic interface reconstruction compared to the coupled VOSET and piecewise linear interface calculation (VOSET-PLIC) method, with accuracy improvements ranging from 34% to 1490% across different test cases. Furthermore, the VOSET-CIR method outperforms the efficient least squares volume-of-fluid interface reconstruction (ELVIRA) and PLIC algorithms in reconstructing random circles and surpasses the quadratic spline based interface reconstruction (QUASI) algorithm in reconstructing random squares. In terms of computational efficiency, except for the initial PLIC algorithm, the time costs of the VOSET-CIR method are substantially lower than those of the ELVIRA and QUASI algorithms, as well as the VOSET-PLIC method.

6 September 2023 in Processes
Verified
Journal Article
Open access
PDF file
FYFeng Yan
Feng Yan
KJKaiTuo Jiao
KaiTuo Jiao
CNChaofei Nie
Chaofei Nie
DHDongxu Han
Dongxu Han
QLQifu Li
Qifu Li
YCYujie Chen
Yujie Chen
The heat transfer assessment of a buried hot oil pipe is essential for the economical and safe transportation of the pipeline, where the basis is to determine the temperature field surrounding the pipe quickly. This work proposes a novel method to efficiently predict the temperature field surrounding a hot oil pipe, which combines the proper orthogonal decomposition (POD) method and the backpropagation (BP) neural network, named the POD-BP model. Specifically, the BP neural network is used to establish the mapping relationship between spectrum coefficients and the preset parameters of the sample. Compared with the classical POD reduced-order model, the POD-BP model avoids solving the system of reduced-order governing equations with spectrum coefficients as variables, thus improving the prediction speed. Another advantage is that it is easy to implement and does not require tremendous mathematical derivation of reduced-order governing equations. The POD-BP model is then used to predict the temperature field surrounding the hot oil pipe, and the sample matrix is obtained from the numerical results using the finite volume method (FVM). In validation cases, both steady and unsteady states are investigated, and multiple boundary conditions, thermal properties, and even geometry parameters (different buried depths and pipe diameters) are tested. The mean errors of steady and unsteady cases are 0.845~3.052% and 0.133~1.439%, respectively. Appealingly, almost no time, around 0.008 s, is consumed in predicting unsteady situations using the proposed POD-BP model, while the FVM requires a computational time of 70 s.

1 March 2024 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
WLWei Lu
Wei Lu
ZZZhanru Zhang
Zhanru Zhang
YCYujie Chen
Yujie Chen
Bohong WangBohong Wang
Bohong Wang
BYBo Yu
Bo Yu
Xiao-Dong WangXiao-Dong Wang
Xiao-Dong Wang
Gravity plays a crucial role in influencing bubble behavior and heat transfer in flow boiling, and its impact can vary significantly in aerospace settings. Therefore, this study aims to numerically investigate flow boiling heat transfer in a rectangular mini-channel under hyper-gravity conditions, specifically at 12 times the normal gravity. To accomplish this, a coupled volume-of-fluid and level set method is employed, taking into account fluid-solid conjugated heat transfer as well as a nucleus site density model derived from experimental data. By reproducing the flow pattern and heat transfer characteristics under different heat flux and flow rate conditions, the study unveils the effects of hyper-gravity on flow boiling heat transfer. When the flow rate is lower under hyper-gravity conditions, a notable phenomenon occurs wherein numerous bubbles detach from the heating wall and coalesce into a vapor film at the top of the mini-channel due to increased buoyancy. In contrast, under normal gravity, bubbles merge and slide on the heating wall, leading to the formation of a dry patch below. Consequently, hyper-gravity results in a lower wall superheat, and the disparity in average wall superheat between normal and high gravities escalates as the added heat flux rises. Notably, in the hyper-gravity environment, the frequent detachment of bubbles in the middle and downstream sections of the mini-channel leads to an initial increase in wall superheating, followed by a plateau along the flow direction. As the flow rate increases, the inertial force intensifies. However, intriguingly, the discrepancy in flow boiling heat transfer between normal and high gravities does not exhibit a monotonic decrease with the increasing flow rate. This behavior can be attributed to the pressing of more bubbles onto the heating wall under normal gravity, resulting in the formation of dry patches at high velocities.

1 December 2024 in Physics of Fluids
Verified
Journal Article
Closed access
WLWei Lu
Wei Lu
YCYujie Chen
Yujie Chen
BZBenxi Zhang
Benxi Zhang
BYBo Yu
Bo Yu
DSDongliang Sun
Dongliang Sun
Xiao-Dong WangXiao-Dong Wang
Xiao-Dong Wang
Flow boiling demonstrates superior heat transfer performance and holds significant potential for thermal management applications. In this study, the great effects of aspect ratios of mini-channel on flow boiling heat transfer are reported by the numerical simulation method. Regarding the heat transfer coefficient (HTC), a boiling number threshold of 5.0 × 10−4 is obtained. Below this value, bubble detachment is not yet constrained by the channel, reducing the dry patches and providing better heat transfer at larger aspect ratios. Above this threshold, boiling becomes more intense, bubble size increases, making detachment easier in smaller aspect ratios, which show superior heat transfer performance. For the critical heat flux (CHF), at a flow rate of 0.1 m/s, the CHF for smaller aspect ratios is 77.78% higher than for larger aspect ratios. As the flow velocity increases, inertial forces begin to dominate bubble behavior, reducing the influence of channel size effects, and the differences in CHF gradually decrease. When the flow velocity exceeds 0.5 m/s, bubble behavior becomes similar, and the difference in CHF drops to less than 10%. This research highlights key parameters for optimizing mini-channel design, promoting the refinement and development of mini-channel structures.