Ge-Ge Song

Ge-Ge Song

Auto-generated profile, based on publicly available information

Ge-Ge Song

School of Chemical Engineering and Technology, Xi'an Jiaotong University, Shaanxi 710049, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2022 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
YCYujie Chen
Yujie Chen
GSGe-Ge Song
Ge-Ge Song
KLKong Ling
Kong Ling
BYBo Yu
Bo Yu
DSDongliang Sun
Dongliang Sun
WTWenquan Tao
Wenquan Tao
In this paper, based on a reasonable nucleus site density model and considering conjugate heat transfer, the coupled volume-of-fluid and level set method is adapted to study subcooled flow boiling in an inclined three-dimensional rectangular mini-channel (0-180{degree sign}) with a characteristic size of 1.0 mm at a low flow rate of 88.8 kg∙m-2∙s-1. The inclination angle is found to have a slight effect on the boiling of the flow. A bubbly flow appears when a heat flux of 300 kW/m2 is added. An unconventional impact force is exerted on larger bubbles because of the reduction in liquid flow area in the downstream region of the mini-channel. This causes large bubbles to slip along the heating wall, with slight differences in the flow pattern under different inclination angles. When the inclination angle is close to 0{degree sign}, the upstream small/medium bubbles leave the heating wall under gravitational effects, which is conducive to heat transfer. As the inclination angle approaches 90{degree sign}, gravity pushes the large bubbles downstream to leave the channel, favoring the rewetting of the dry patches below. These two positive effects begin to fail as the inclination angle approaches 180{degree sign}, leading to slightly worse overall heat exchange efficiency. However, the maximum differences in the average and local wall superheating of the mini-channel are only 8.4% and 20.1%, respectively, across the range of inclination angles because the flow pattern remains similar under the effect of the impact force.

30 July 2025 in Applied Thermal Engineering
Verified
Journal Article
Closed access
GSGege Song
Gege Song
Yonghai ZhangYonghai Zhang
Yonghai Zhang
XMXiang Ma
Xiang Ma
XYXiaoping Yang
Xiaoping Yang
JWJinjia Wei
Jinjia Wei

4 November 2022
Verified
Dataset
Closed access
PDF file
YCYujie Chen
Yujie Chen
GSGe-Ge Song
Ge-Ge Song
KLKong Ling
Kong Ling
BYBo Yu
Bo Yu
DSDongliang Sun
Dongliang Sun
WLWei Lu
Wei Lu
Under a low flow rate, gravity may become prominent for bubble behavior and heat transfer of flowing boiling because of the weakness of drag force from liquid, and its effect changes with the inclination angle of the mini-channel but without consensus. In this paper, based on a reasonable nucleus site density model and considering conjugate heat transfer, the coupled volume-of-fluid and level set method is adopted to study the subcooled flow boiling in an inclined three-dimensional rectangular mini-channel (0°–180°) with a characteristic size of 1.0 mm at a low flow rate of 88.8 kg m−2 s−1. The inclination angle is found to have a slight effect on the flow boiling, which is different from the conclusion drawn based on the traditional-macro channel. A bubbly flow appears when a heat flux of 300 kW/m2 is added. An unconventional impact force is proposed, which presses large bubbles to slip along the heating wall, with slight differences in the flow pattern under different inclination angles. When the inclination angle is close to 0°, the upstream small/medium bubbles leave the heating wall under gravitational effects, which is conducive to heat transfer. As the inclination angle approaches 90°, gravity pushes the large bubbles downstream to leave the channel, favoring the rewetting of the dry patches below. These two positive effects fail as the inclination angle approaches 180°, leading to slightly worse overall heat exchange efficiency. However, the maximum differences in the average and local wall superheating of the mini-channel are only 8.4% and 22.5%, respectively, across the range of inclination angles because the flow pattern remains similar under the effect of the impact force. In addition, the effect of inclination angle on flow boiling becomes weaker with the increase in heat flux because of happening of slug flow.

4 November 2022
Verified
Dataset
Closed access
PDF file
YCYujie Chen
Yujie Chen
GSGe-Ge Song
Ge-Ge Song
KLKong Ling
Kong Ling
BYBo Yu
Bo Yu
DSDongliang Sun
Dongliang Sun
WLWei Lu
Wei Lu
Under a low flow rate, gravity may become prominent for bubble behavior and heat transfer of flowing boiling because of the weakness of drag force from liquid, and its effect changes with the inclination angle of the mini-channel but without consensus. In this paper, based on a reasonable nucleus site density model and considering conjugate heat transfer, the coupled volume-of-fluid and level set method is adopted to study the subcooled flow boiling in an inclined three-dimensional rectangular mini-channel (0°–180°) with a characteristic size of 1.0 mm at a low flow rate of 88.8 kg m−2 s−1. The inclination angle is found to have a slight effect on the flow boiling, which is different from the conclusion drawn based on the traditional-macro channel. A bubbly flow appears when a heat flux of 300 kW/m2 is added. An unconventional impact force is proposed, which presses large bubbles to slip along the heating wall, with slight differences in the flow pattern under different inclination angles. When the inclination angle is close to 0°, the upstream small/medium bubbles leave the heating wall under gravitational effects, which is conducive to heat transfer. As the inclination angle approaches 90°, gravity pushes the large bubbles downstream to leave the channel, favoring the rewetting of the dry patches below. These two positive effects fail as the inclination angle approaches 180°, leading to slightly worse overall heat exchange efficiency. However, the maximum differences in the average and local wall superheating of the mini-channel are only 8.4% and 22.5%, respectively, across the range of inclination angles because the flow pattern remains similar under the effect of the impact force. In addition, the effect of inclination angle on flow boiling becomes weaker with the increase in heat flux because of happening of slug flow.

4 November 2022
Verified
Dataset
Closed access
PDF file
YCYujie Chen
Yujie Chen
GSGe-Ge Song
Ge-Ge Song
KLKong Ling
Kong Ling
BYBo Yu
Bo Yu
DSDongliang Sun
Dongliang Sun
WLWei Lu
Wei Lu
Under a low flow rate, gravity may become prominent for bubble behavior and heat transfer of flowing boiling because of the weakness of drag force from liquid, and its effect changes with the inclination angle of the mini-channel but without consensus. In this paper, based on a reasonable nucleus site density model and considering conjugate heat transfer, the coupled volume-of-fluid and level set method is adopted to study the subcooled flow boiling in an inclined three-dimensional rectangular mini-channel (0°–180°) with a characteristic size of 1.0 mm at a low flow rate of 88.8 kg m−2 s−1. The inclination angle is found to have a slight effect on the flow boiling, which is different from the conclusion drawn based on the traditional-macro channel. A bubbly flow appears when a heat flux of 300 kW/m2 is added. An unconventional impact force is proposed, which presses large bubbles to slip along the heating wall, with slight differences in the flow pattern under different inclination angles. When the inclination angle is close to 0°, the upstream small/medium bubbles leave the heating wall under gravitational effects, which is conducive to heat transfer. As the inclination angle approaches 90°, gravity pushes the large bubbles downstream to leave the channel, favoring the rewetting of the dry patches below. These two positive effects fail as the inclination angle approaches 180°, leading to slightly worse overall heat exchange efficiency. However, the maximum differences in the average and local wall superheating of the mini-channel are only 8.4% and 22.5%, respectively, across the range of inclination angles because the flow pattern remains similar under the effect of the impact force. In addition, the effect of inclination angle on flow boiling becomes weaker with the increase in heat flux because of happening of slug flow.

4 November 2022
Verified
Dataset
Closed access
PDF file
YCYujie Chen
Yujie Chen
GSGe-Ge Song
Ge-Ge Song
KLKong Ling
Kong Ling
BYBo Yu
Bo Yu
DSDongliang Sun
Dongliang Sun
WLWei Lu
Wei Lu
Under a low flow rate, gravity may become prominent for bubble behavior and heat transfer of flowing boiling because of the weakness of drag force from liquid, and its effect changes with the inclination angle of the mini-channel but without consensus. In this paper, based on a reasonable nucleus site density model and considering conjugate heat transfer, the coupled volume-of-fluid and level set method is adopted to study the subcooled flow boiling in an inclined three-dimensional rectangular mini-channel (0°–180°) with a characteristic size of 1.0 mm at a low flow rate of 88.8 kg m−2 s−1. The inclination angle is found to have a slight effect on the flow boiling, which is different from the conclusion drawn based on the traditional-macro channel. A bubbly flow appears when a heat flux of 300 kW/m2 is added. An unconventional impact force is proposed, which presses large bubbles to slip along the heating wall, with slight differences in the flow pattern under different inclination angles. When the inclination angle is close to 0°, the upstream small/medium bubbles leave the heating wall under gravitational effects, which is conducive to heat transfer. As the inclination angle approaches 90°, gravity pushes the large bubbles downstream to leave the channel, favoring the rewetting of the dry patches below. These two positive effects fail as the inclination angle approaches 180°, leading to slightly worse overall heat exchange efficiency. However, the maximum differences in the average and local wall superheating of the mini-channel are only 8.4% and 22.5%, respectively, across the range of inclination angles because the flow pattern remains similar under the effect of the impact force. In addition, the effect of inclination angle on flow boiling becomes weaker with the increase in heat flux because of happening of slug flow.