(1) The overall energy requirement of a building may be impacted by the building design, the selection of materials, the construction methods, and lifecycle management. To achieve an optimum energy-efficiency level when dealing with a new building or renovation project, it is important to improve the entire construction process as it is not enough to merely focus on the operational phase. If conventional construction practices do not evolve, compromise, or adapt to necessary changes, then it becomes challenging to deliver an ultimate low energy building. (2) This paper demonstrates the trend of off-site prefabrication and its production principles and the notions of open-building design and Design for X, as well as offering an overview of the development of automation in construction, which provides both insights and evaluations based on the context of the research. (3) Three European Union Horizon 2020 research projects were evaluated, and the outcome of the projects served as the backbone for the research and inspired the design of the proposed integrated façade system. Two design scenarios were proposed to demonstrate the potential improvements that could be achieved in a new build as well as in renovation projects. (4) The research lays a foundation for establishing a larger cross-disciplinary collaboration in the future.

Indoor air quality (IAQ) plays a critical role in the health and cognitive performance of students, making its assessment essential for sustainable building design in educational environments. This study evaluates whether the ventilation flow rates prescribed by the Spanish Regulation for Thermal Installations in Buildings (RTIB), together with the occupancy densities defined by the Technical Building Code (TBC), are sufficient to maintain CO₂ concentrations within regulatory limits in classrooms and library reading rooms. A validated three-dimensional CFD model was developed to simulate airflow patterns and CO₂ distribution under typical operating conditions. The model was experimentally validated using measurements from a dedicated test room in the KUBIK experimental building of Tecnalia, demonstrating high predictive accuracy with average relative errors between 14% and 20%. Results indicate that, under current RTIB and TBC design criteria, (modelled for a 36 m² classroom with 24 occupants and a fresh air supply of 1080 m³/h), CO₂ levels frequently exceed the 910 ppm regulatory thresholds established by the RTIB’s direct method, highlighting potential shortcomings in existing standards for educational spaces. Additionally, two mechanical ventilation configurations were analyzed, revealing that floor-supply ventilation promotes more homogeneous pollutant dispersion and lower concentration peaks compared with ceiling-mounted systems. These findings underline the need to reconsider ventilation design strategies in educational buildings and demonstrate the value of CFD modelling as a tool to support evidence-based decisions toward healthier and more sustainable indoor environments.

District heating networks deliver around 13% of the heating energy in the EU, being considered as a key element of the progressive decarbonization of Europe. The H2020 REnewable Low TEmperature District project (RELaTED) seeks to contribute to the energy decarbonization of these infrastructures through the development and demonstration of the following concepts: reduction in network temperature down to 50 °C, integration of renewable energies and waste heat sources with a novel substation concept, and improvement on building-integrated solar thermal systems. The coupling of renewable thermal sources with ultra-low temperature district heating (DH) allows for a bidirectional energy flow, using the DH as both thermal storage in periods of production surplus and a back-up heating source during consumption peaks. The ultra-low temperature enables the integration of a wide range of energy sources such as waste heat from industry. Furthermore, RELaTED also develops concepts concerning district heating-connected reversible heat pump systems that allow to reach adequate thermal levels for domestic hot water as well as the use of the network for district cooling with high performance. These developments will be demonstrated in four locations: Estonia, Serbia, Denmark, and Spain.

The continuous growth of renewable energy and the transition to a more de-centralised electricity generation adds significant complexity to balance power supply and demand in the grid. These imbalances are partially compensated by demand response programs, which represent a new business opportunity in the building sector, especially for ESCOs. Including demand response to their traditional energy efficiency-based business model adds an additional revenue stream that could potentially shorten payback periods of energy renovation projects. This paper introduces this new dual-services business model, and evaluates the potential suitability of HVAC, generation and storage technologies to ensure proposed energy efficiency and flexibility goals.