Nowadays, autonomous vehicles are increasing, and the driving scenario that includes both autonomous and human-driven vehicles is a fact. Knowing the driving styles of drivers in the process of automating vehicles is interest in order to make driving as natural as possible. To this end, this article presents a first approach to the design of a controller for the braking system capable of imitating the different manoeuvres that any driver performs while driving. With this aim, different experimental tests have been carried out with a vehicle instrumented with sensors capable of providing real-time information related to the braking system. The experimental tests consist of reproducing a series of braking manoeuvres at different speeds on a flat floor track following a straight path. The tests distinguish between three types of braking manoeuvre: maintained, progressive and emergency braking, which cover all the driving circumstances in which the braking system may intervene. This article presents an innovative approach to characterise braking types thanks to the methodology of analysing the data obtained by sensors during experimental tests. The characterisation of braking types makes it possible to dynamically classify three driving styles: cautious, normal and aggressive. The proposed classifications allow it possible to identify the driving styles on the basis of the pressure in the hydraulic brake circuit, the force exerted by the driver on the brake pedal, the longitudinal deceleration and the braking power, knowing in all cases the speed of the vehicle. The experiments are limited by the fact that there are no other vehicles, obstacles, etc. in the vehicle’s environment, but in this article the focus is exclusively on characterising a driver with methods that use the vehicle’s dynamic responses measured by on-board sensors. The results of this study can be used to define the driving style of an autonomous vehicle.

This paper presents an analysis of the risk of neck injury in vehicle occupants as a consequence of an impact. A review of the formulation of indexes that are used in the assessment and investigation of neck injury risk is discussed with the aim of providing a new, more appropriate index using suitable sensorized equipment. An experimental analysis is proposed with a new driver monitoring device using low-cost sensors. The system consists of wearable units for the head, neck, and torso where inertial measurement sensors (IMU) are installed to record data concerning the occupant’s head, neck, and torso accelerations while the vehicle moves. Two laser infrared distance sensors are also installed on the vehicle’s steering wheel to record the position data of the head and neck, as well as an additional IMU for vehicle acceleration values. To validate both the device and the new index, experiments are designed in which different sensorized volunteers reproduce an emergency braking maneuver with an instrumented vehicle at speeds of 10, 20, and 30 km/h before the beginning of any braking action. The neck is particularly sensitive to sudden changes in acceleration, so a sudden braking maneuver is enough to constitute a potential risk of cervical spine injury. During the experiments, large accelerations and displacements were recorded as the test speed increased. The largest accelerations were obtained in the experimental test at a speed of 30 km/h with values of 19.17, 9.57, 9.28, and 5.09 m/s² in the head, torso, neck, and vehicle, respectively. In the same experiment, the largest displacement of the head was 0.33 m and that of the neck was 0.27 m. Experimental results have verified that the designed device can be effectively used to characterize the biomechanical response of the neck in car impacts. The new index is also able to quantify a neck injury risk by taking into account the dynamics of a vehicle and the kinematics of the occupant’s head, neck, and torso. The numerical value of the new index is inversely proportional to the acceleration experienced by the vehicle occupant, so that small values indicate risky conditions.

Automatic systems are increasingly being applied in the automotive industry to improve driving safety and passenger comfort, reduce traffic and increase energy efficiency. The objective of this work is focused on improving the automatic brake assistance systems of motor vehicles trying to imitate human behaviour but correcting possible human errors such as distractions, lack of visibility or time reaction. The proposed system can optimise the intensity of the braking according to the available distance to carry out the manoeuvre and the vehicle speed to be as less aggressive as possible, thus giving priority to the comfort of the driver. A series of tests are carried out in this work with a vehicle instrumented with sensors that provide real-time information about the braking system. The data obtained experimentally during the dynamic tests are used to design an estimator using the Artificial Neural Network (ANN) technique. This information makes it possible to characterise all braking situations based on the pressure of the brake circuit, the type of manoeuvre and the test speed. Thanks to this ANN, it is possible to estimate the requirements of the braking system in real driving situations and carry out the manoeuvres automatically. Experiments and simulations verified the proposed method for the estimation of braking pressure in real deceleration scenarios.