Dipeptide biomaterials are strong piezoelectric materials that can convert applied mechanical forces into electricity. We have developed large-scale hybrid electrospun arrays containing N-tert-butoxycarbonyl (Boc) diphenylalanine in the form of nanotubes embedded in biocompatible polymers. These nanofibers exhibit strong piezoelectric properties when a periodic mechanical force is applied. The nanostructured hybrid materials were produced by the electrospinning technique. Optical absorption measurements show four bands in the spectral region 240–280 nm indicating quantum confinement due to nanotube formation of Boc-diphenylalanine in dichloromethane solutions. A strong blue photoluminescence emission was observed from nanotubes crystallized inside the fiber arrays during the electrospinning process. These two dimensional hybrid biomaterial structures are able to generate voltage, current and density power of up to 30 V, 300 nA and 2.3 μW cm⁻², respectively, when a periodical force of 1.5 N is applied. The dipeptide-polymer electrospun arrays can power several liquid-crystal display panels and may be used for biomedical applications and as bio-energy sources.

Intense second harmonic generation emission was observed from a single nanofiber, corresponding to an effective 2nd order susceptibility of 80 pm V⁻¹, 4 times greater than the largest 2nd order susceptibility tensor element (21 pm V⁻¹) for a macroscopic 3NA crystal.

The work reported demonstrates an simple method of extracting cellulose nanofibers (CNF) from cellulose microfibers (CMF) obtained from the plant Stipatenacissima. Here, a method for the production of CNF from CMF extracted from Alfa grass by exfoliation in polyvinyl alcohol (PVA) solution, is demonstrated. The CMF were produced in powder form and exfoliated in PVA aqueous solution to produce composites with 2, 4, 5 and 10 wt-% of CNF. Scanning Electron Microscopy demonstrated exfoliation of CMF, dispersion of the CNF and wetting by the polymer. The composites were characterised by thermogravimetry, differential scanning calorimetry, X-ray diffraction and tensile testing. The addition of CNF to PVA reduced the crystallinity degree of PVA. The large increase of the Young’s modulus from 38 to 113% (relative to pure PVA) for composites with 2 to 10 wt-% of CNF incorporation is consistent with the extensive exfoliation of CMF into CNF and its excellent interface with PVA.

Intense well polarized second harmonic light was generated by poly(methyl methacrylate) nanofibres with embedded para -nitroaniline nanocrystals. Subwavelength diameter fibres were electro-spun using a 1:2 weight ratio of chromophore to polymer. Analysis of the generated second harmonic light indicates that the para -nitroaniline molecules, which nominally crystalize in the centrosymmetric space group, were organized into noncentrosymmetric structures leading to a second order susceptibility dominated by a single tensor element. Under the best deposition conditions, the nanofibrers display an effective nonlinear optical susceptibility approximately two orders of magnitude greater than that of potassium dihydrogen phosphate. Generalizing this approach to a broad range of organic molecules with strong individual molecular second order nonlinear responses, but which nominally form centrosymmetric organic crystals, could open a new pathway for the fabrication of efficient sub-micron sized second harmonic light generators.

Polylactic acid (PLA) is a bio-based, biodegradable polymer that presents high potential for biomedical and sensing applications. Ongoing works reported in the literature concern mainly applications based on 3D printing, while textile applications are hindered by the limited flexibility of PLA and its composite filaments. In the present work, PLA/multiwall carbon nanotube (MWCNT) composite filaments were produced with enhanced flexibility and electrical conductivity, which may be applied on a textile structure. A biodegradable plasticizer was incorporated in the nanocomposites, aiming at improving MWCNT dispersion and increasing the flexibility of the filaments. Filaments were produced with a range of compositions and their morphology was characterized as well as their thermal, thermomechanical, and electrical properties. Selected compositions were tested for sensing activity using saturated acetone vapor, demonstrating a suitable response and potential for the application in fabrics with sensing capacity.