Rockburst is an unstable failure of a rock mass which is influenced by many factors. During deep excavations, the presence of nearby geological structures such as minor faults, joints, and shear zones increases the likelihood of rockburst occurrence. A shear zone has been observed in the headrace tunnel in the Neelum Jhelum Hydropower Project, Pakistan, which has played an important role in major rockburst events in the project’s history. A rockburst is a seismic event that involves the release of a great amount of energy as the dynamic wave radiated from the seismic source reaches the excavation boundary. In this paper, the FLAC 2D explicit numerical code has been used to simulate the dynamic phenomenon of rockburst near the shear zone in a headrace tunnel. The behavior of the rock mass around the tunnel has been studied under both static and dynamic loading. According to modeling results, rockburst significantly affected the upper left quadrant of the tunnel similar to the actual failure profile with a depth of approximately 5 m. The dynamic impact of rockburst has also affected the loading conditions of the support system in the adjacent tunnel. This study elucidates one of the most important rockburst controlling factors through numerical analysis and recommends yielding support measures that can withstand the dynamic impacts of rockburst in deep, hard rock tunnels.

Empirical classification systems do not provide details of the factors that affect the performance of fully grouted rock bolts, as they are based on average values. Fully grouted rock-bolt patterns during tunnel-support design are a part of the composite support, and they are functions of rock-mass quality and tunnel span. Various fully grouted rock bolts are used in situ in different environments, along with other tunnel-support materials in static and dynamic environments during tunnel construction. The rock-bolt performances are evaluated through pull-out tests that follow ASTM standards. Several field pull-out tests were conducted on cement and resin grouted rock bolts. Under groundwater flow conditions, inflated steel tube rock bolts were tested and the results were compared with fully grouted rock bolts. Based on field experiments and previous studies, the factors that affect rock bolt performances are divided into five groups with respective sub-factors. Natural parameters cannot be controlled to ensure safety, economy, and stability in tunnels. The controllable factors, too, can be varied only within a practical range. In conclusion, the factors investigated here should be considered with the empirical support pattern of rock-mass classification systems for safe and economical design.

To accommodate traffic volume on roads due to ever-increasing population growth, the widening of highways and motorways is in high demand. Nevertheless, the widening of tunnels on these road networks is quite complex due to the presence of numerous rock types, in situ stress, and different widening modes. To overcome these complexities, eight different tunnel shapes were simulated under varying support conditions for asymmetric and symmetric widening. It was found that the tunnels with a round shape, such as horseshoe and semicircular with flatbed, are more effective for asymmetric widening, whereas the provision of a rounded invert in these shapes can reverse the widening option to symmetric. Furthermore, an insignificant effect of the difference in asymmetric and symmetric widening of regular tunnel shapes, such as box, rectangular, and semi-elliptical, was found. A full factorial design statistical analysis confirmed the decrease in tunnel deformation by using various tunnel support systems and showed a significant deformation difference according to monitoring locations at the tunnel periphery. The deformation difference in the case of both tunnel widening modes was also analyzed according to different design parameters. This study provides a comprehensive understanding of rock mass behavior when the widening of any underground opening is carried out.