Integrity is one criteria to evaluate GNSS performance, which was first introduced in the aviation field. It is a measure of trust which can be placed in the correctness of the information supplied by the total system. In recent years, many GNSS-based applications emerge in the urban environment including liability critical ones, so the concept of integrity attracts more and more attention from urban GNSS users. However, the algorithms developed for the aerospace domain cannot be introduced directly to the GNSS land applications. This is because a high data redundancy exists in the aviation domain and the hypothesis that only one failure occurs at a time is made, which is not the case for the urban users. The main objective of this paper is to provide an overview of the past and current literature discussing the GNSS integrity for urban transport applications so as to point out possible challenges faced by GNSS receivers in such scenario. Key differences between integrity monitoring scheme in aviation domain and urban transport field are addressed. And this paper also points out several open research issues in this field.
Every year, for ten years now, the IPIN competition has aimed at evaluating real-world indoor localisation systems by testing them in a realistic environment, with realistic movement, using the EvAAL framework. The competition provided a unique overview of the state-of-the-art of systems, technologies, and methods for indoor positioning and navigation purposes. Through fair comparison of the performance achieved by each system, the competition was able to identify the most promising approaches and to pinpoint the most critical working conditions. In 2020, the competition included 5 diverse off-site off-site Tracks, each resembling real use cases and challenges for indoor positioning. The results in terms of participation and accuracy of the proposed systems have been encouraging. The best performing competitors obtained a third quartile of error of 1 m for the Smartphone Track and 0.5 m for the Foot-mounted IMU Track. While not running on physical systems, but only as algorithms, these results represent impressive achievements.
Zero velocity update is a common and efficient approach to bound the accumulated error growth for foot-mounted inertial navigation system. Thus a robust zero velocity detector (ZVD) for all kinds of locomotion is needed for high accuracy pedestrian navigation systems. In this paper, we investigate two machine learning-based ZVDs: Histogram-based Gradient Boosting (HGB) and Random Forest (RF), aiming at adapting to different motion types while reducing the computation costs compared to the deep learning-based detectors. A complete data pre-processing procedure, including a feature engineering study and data augmentation techniques, is proposed. A motion classifier based on HGB is used to distinguish ”single support” and ”double float” motions. This concept is different from the traditional locomotion classification (walking, running, stair climbing) since it merges similar motions into the same class. The proposed ZVDs are evaluated with inertial data collected by two subjects over a 1.8 km indoor/outdoor path with different motions and speeds. The results show that without huge training dataset, these two machine learning-based ZVDs achieve better performances (55 cm positioning accuracy) and lower computational costs than the two deep learning-based Long Short-Term Memory methods (1.21 m positioning accuracy).
10 June 2020 in IEEE Intelligent Transportation Systems Magazine
Global Navigation Satellite Systems (GNSS) have continually involved in our daily life in the past decades. Among all these GNSS-based applications, there is an increasing number of GNSS-based urban transport applications, especially the critical liability ones, such as the Electronic Toll Collection (ETC) and the Intelligent Transport System (ITS). For these GNSS-based applications, not only positioning accuracy but also its reliability is required. Latter has attracted more and more attention from urban GNSS users. Yet urban environments present great challenges for common commercial GNSS receivers since the existence of local effects such as multipath and the Non-Line-of-Sight (NLOS) receptions. The main objective of this paper is to investigate the integrity performance one can expect from a low-cost common GNSS receiver. Under this framework, this paper proposes an innovation-based integrity monitoring scheme by using an Extended Kalman Filter (EKF) with the help of carrier-power-to-noise ratio ( C/N0 ) weighting. The derivations of the Horizontal Protection Level (HPL) for the EKF innovation-based integrity monitoring is also presented in detail. The accuracy and integrity performances are evaluated with real GPS data collected in urban environments. Compared to the classic residual-based snapshot Receiver Autonomous Integrity Monitoring (RAIM), the innovation-based EKF integrity monitoring scheme presents more advantages in terms of accuracy and integrity. With the real dataset collected in urban canyon of Nantes center, the results show that the average size of horizontal position error has been reduced by 1.15 meter with the proposed approach compared to the classic weighted RAIM, the median size of HPL has been reduced by 7.5 meters and the algorithm availability is 100% instead of 98.57 %.
Foot-mounted positioning devices are becoming more and more popular in the different application field. For example, inertial sensors are now embedded in safety shoes to monitor security. They allow positioning with zero velocity update to bound the error growth of foot-mounted inertial sensors. High positioning accuracy depends on robust zero velocity detector (ZVD). Existing Artificial Intelligent (AI)-based methods classify the pedestrian dynamics to adjust ZVD at the cost of high computation costs and error propagation from miss-classification. We propose a machine learning model to detect zero velocity moments without any pre-classification step, named Uniform AI Model for All pedestrian Motions (UMAM). Performance is evaluated by benchmarking on two new subjects of opposite gender and different size, not included in the training data set, over complex indoor/outdoor paths of 2 km for subject 1 and 2.1 km for subject 2. We obtain an average 2D loop closure error of less than 0.37%.