In light of the challenges of integrating more renewable energy sources (RESs) into the utility grid, the virtual synchronous generator (VSG) will become an indispensable configuration of modern power systems. RESs are gradually replacing the conventional synchronous generators that are responsible for supplying the utility grid with the inertia damping properties, thus renewable power grids are more vulnerable to disruption than traditional power grids. Therefore, the VSG is presented to mimic the behavior of a real synchronous generator in the power grid through the virtual rotor concept (i.e., which emulates the properties of inertia and damping) and virtual primary and secondary controls (i.e., which emulate the conventional frequency control loops). However, inadequate imitation of the inertia power owing to the low and short-term power of the energy storage systems (ESSs) may cause system instability and fail dramatically. To overcome this issue, this paper proposes a VSG based on superconducting magnetic energy storage (SMES) technology to emulate the needed inertia power in a short time and thus stabilizing the system frequency at different disturbances. The proposed VSG based on SMES is applied to improve the frequency stability of a real hybrid power grid, Egyptian Power System (EPS), with high renewables penetration levels, nonlinearities, and uncertainties. The performance superiority of the proposed VSG-based SMES is validated by comparing it with the traditional VSG approach based on battery ESSs. The simulation results demonstrated that the proposed VSG based on the SMES system could significantly promote ultra-low-inertia renewable power systems for several contingencies.

Model predictive control (MPC) has been used widely in power electronics due to its simple concept, fast dynamic response, and good reference tracking. However, it suffers from parametric uncertainties, since it directly relies on the mathematical model of the system to predict the optimal switching states to be used at the next sampling time. As a result, uncertain parameters lead to an ill-designed MPC. Thus, this paper offers a model-free control strategy on the basis of artificial neural networks (ANNs), for mitigating the effects of parameter mismatching while having a little negative impact on the inverter’s performance. This method includes two related stages. First, MPC is used as an expert to control the studied converter in order to provide a dataset, while, in the second stage, the obtained dataset is utilized to train the proposed ANN. The case study herein is based on a four-level three-cell flying capacitor inverter. In this study, MATLAB/Simulink is used to simulate the performance of the proposed method, taking into account various operating conditions. Afterward, the simulation results are reported in comparison with the conventional MPC scheme, demonstrating the superior performance of the proposed control strategy in terms of robustness against parameters mismatch and low total harmonic distortion (THD), especially when changes occur in the system parameters, compared to the conventional MPC. Furthermore, the experimental validation of the proposed method is provided based on the Hardware-in-the-Loop (HIL) simulation using the C2000TM-microcontroller-LaunchPadXL TMS320F28379D kit, demonstrating the applicability of the ANN-based control strategy to be implemented on a DSP controller.

Since modern power systems are susceptible to undesirable frequency oscillations caused by uncertainties in renewable energy sources (RESs) and loads, load frequency control (LFC) has a crucial role to get these systems’ frequency stability back. However, existing LFC techniques may not be sufficient to confront the key challenge arising from the low-inertia issue, which is due to the integration of high-penetration RESs. Therefore, to address this issue, this study proposes an optimized intelligent fractional-order integral (iFOI) controller for the LFC of a two-area interconnected modern power system with the implementation of virtual inertia control (VIC). Here, the proposed iFOI controller is optimally designed using an efficient metaheuristic optimization technique, called the gray wolf optimization (GWO) algorithm, which provides minimum values for system frequency deviations and tie-line power deviation. Moreover, the effectiveness of the proposed optimal iFOI controller is confirmed by contrasting its performance with other control techniques utilized in the literature, such as the integral controller and FOI controller, which are also designed in this study, under load/RES fluctuations. Compared to these control techniques from the literature for several scenarios, the simulation results produced by the MATLAB software have demonstrated the efficacy and resilience of the proposed optimal iFOI controller based on the GWO. Additionally, the effectiveness of the proposed controller design in regulating the frequency of interconnected modern power systems with the application of VIC is confirmed.

In this paper, an adaptive virtual inertia-damping system based on model predictive control (MPC) is proposed to enhance the frequency dynamic performance of islanded microgrids (MGs) considering a high penetration level of renewable energy sources (RESs). Recently, a large amount of RESs is replacing traditional generating units, causing an undesirable effect on the MG frequency stability and system inertia, and thus weakening the MG. Therefore, the proposed control system handles this challenge to enhance the robust performance and stability of the MG with high RESs penetration during contingencies. The proposed online MPC strategy estimates the gains of the virtual inertia control (VIC) system (i.e., inertia and damping coefficients) in high RESs MG. The performance of the proposed adaptive VIC system is compared with the conventional VIC system (i.e., constant values of inertia and damping coefficients) using MATLAB/Simulink under numerous disturbances and system uncertainties. Moreover, the effectiveness of the proposed adaptive VIC system based on the online MPC strategy is verified by comparing its performance with the adaptive VIC system based on fuzzy logic control, which is designed to estimate only the inertial gain. The results highlight that the frequency stability is upgraded, and the adaptive virtual inertia system based on MPC successfully supports low-inertia islanded MGs with RESs and load fluctuations.

The paper focuses on galvanically isolated series-resonant dc-dc converters with a low quality factor of a magnetically integrated resonant tank. These converters can be controlled at a constant switching frequency to achieve the input voltage buck regulation. The paper compares various buck control methods, such as conventional pulse-width modulation, hybrid pulse-width modulation, shifted pulse-width modulation, hybrid shifted pulse-width modulation, improved shifted pulse-width modulation, asymmetrical pulse-width modulation, pulse-width modulation, and hybrid pulse-width modulation applied to the series-resonant dc-dc converter. The study considers step-up implementation of the series-resonant dc-dc converter topology with the voltage doubler rectifier, which makes it suitable as a front-end dc-dc converter for the integration of renewable energy sources in dc microgrids. The voltage buck control methods considered were compared analytically in terms of the cumulative power losses calculated theoretically. The theoretical results were compared with the experimental measurements to confirm the calculations and benchmark the voltage buck control methods. The experimental validation was performed using a 250 W prototype that demonstrated the hybrid PSM achieves the best performance. The experimental results were found in good agreement with analytically predicted values of the power loss.