Shotcrete material has found extensive applications as a reinforcing material in the engineering sector. This study examined the effect of doped glass fibers on the mechanical performance of the modified shotcrete material composed of aeolian sand, fly ash, cement, quicklime, and doped glass fibers. Its tensile and shear strengths values were experimentally determined via a WAW-1000D computerized hydraulic universal tensile testing machine. Its microstructure was analyzed via a size analyzer, scanning electron microscope (SEM), and X-ray diffractometer (XRD). A 2D simplified mechanical model was elaborated to reflect the influence mechanism of the doped glass fibers on the mechanical performance of the modified shotcrete material. The experimental and mechanical analysis results indicated that, at the macroscopic scale, the experimental tensile and shear strengths of the shotcrete material doped with glass fibers were significantly higher than those of the undoped shotcrete material (by up to 310% and 596%, respectively). These results were in concert with the proposed model predictions, where the compound stresses in the shotcrete material were derived as the sum of the stress borne by the shotcrete material itself and the bridging stress exerted by the glass fibers. At the microscopic scale, SEM observations also revealed that the glass fibers were intertwined with each other and tightly enveloped by the shotcrete material particles within the modified shotcrete specimens, connecting the particles of different components into a whole and improving the overall mechanical strength. In addition, the relationships of the compound stress of the shotcrete material vs. embedment length, embedment angle, and cross-sectional area of the glass fibers were established. The research findings are considered instrumental in clarifying the mechanism by which the glass fibers influence the mechanical performance of shotcrete materials and optimize their solid waste (fly ash and quicklime) utilization.
Sand-based cemented backfill (SBCB) mining technology is instrumental in utilizing coal resources buried under the water bodies. SBCB is exposed to the long-term action of mining-induced stresses in the goaf and groundwater permeating via microcracks along the rock strata. Studying the permeability evolution of SBCB under varying stress states is crucial for protecting coal and water resources below the aquifer. This study is focused on the influence law of different stress states on the SBCB permeability exposed to groundwater, which was tested under different axial and confining pressures using a laboratory seepage meter, particle size analyzer, scanning electron microscope (SEM), and X-ray diffractometer (XRD). Best-fitting quadratic polynomials linking the SBCB permeability with confining and axial pressures, respectively, were obtained via statistical processing of test results. The permeability gradually dropped within the elastic range as the confining and axial pressures increased. Moreover, an increase in the confining pressure caused a more dramatic reduction in the SBCB permeability than the axial pressure. Finally, the SBCB seepage mechanism under different stress states was revealed based on the particle size analysis, XRD patterns, and SEM microstructure. These findings are considered instrumental in substantiating safe mining of coal resources below the water bodies and above the confined groundwater.
Solid waste backfill mining can effectively deal with gangue and other mining wastes, as well as control the movement and damage of rock strata. In this paper, the RFPA2D rock failure process analysis software is used to study the fracture evolution and seepage response mechanism of the key aquiclude strata (KAS) under the conditions of different structural characteristics, interlayer rock thickness, and backfilling ratios in backfill mining. The simulation results show that, in backfill mining, soft rock plays a crucial role in the fracture repair of KAS with different structural characteristics. An increase in the KAS thickness from 15 to 35 m is shown to results in a continuously improved repair of KAS fractures. At the advancing distance of the working face of 50~100 m and the KAS thickness of 35 m, the minimum vertical seepage velocity of is reached. An increase in the backfilling ratio from 45 to 80% improves the control effect on the overlying strata. A case study of backfill mining in the Wugou Coal Mine located in the Anhui Province of China was conducted. At the goaf backfilling ratio of 80%, the composite KAS’s good control effect was achieved, which minimized seepage and avoided the water in rush phenomena. The above engineering application ensured the safe backfill mining of coal resources.
The mechanical strength of cemented paste backfill (CPB), especially the early compressive strength, is crucial for controlling the overlying rock movement. Therefore, improving the early compressive strength of CPB is a critical issue. In this study, the doped glass fibers’ effect on the macroscopic mechanical strength and microstructural features of the sand‐based CPB (SCPB) with different curing ages was analyzed. The macroscopic properties and the microstructure of SCPB were characterized experimentally and analyzed via scanning electron microscopy. The results showed that slump sizes of SCPB specimens without and with doped glass fibers were 269 and 209 mm. Thus, doped glass fibers inhibited the SCPB transportability and significantly improved its early compressive strength. At curing ages of 1 d and 3 d, the compressive strength of SCPB specimens doped with glass fibers was improved by 679 and 278%, respectively, compared to the blank control group. As the curing age increased, the compressive strength improvement of the SCPB doped with glass fibers was gradually saturated. Finally, the correlation between macroscopic and microscopic properties of SCPB specimens was analyzed comparatively. Thus, the mechanism of doped glass fibers’ influencing the early compressive strength of the SCPB was revealed. The research findings provide theoretical guidance for improving the SCPB early compressive strength at the mining site with the CPB mining technique.