Based on the homodyne detection, a compact and cost-effective all-fiber laser Doppler vibrometer (LDV) with high resolution is presented. For the signal processing, the discrimination algorithm combined with the nonorthogonal correction is applied. The algorithm corrects the quadrature imbalance and other nonlinearity. In the calibration experiment, with the glass pasted on a piezoceramic transducer (PZT), the velocity resolution of 62 nm/s at 4 kHz and displacement resolution of 2.468 pm are achieved. For the LDV-based acousto-optic communication, the minimum detectable sound pressure level (SPL) reached 0.12 Pa under the hydrostatic air-water surface. The results demonstrate that the designed homodyne LDV has a low system background noise and can offer high precision in the vibration measurement.
A short-range, compact, real-time pulsed laser rangefinder is constructed based on pulsed time-of-flight (ToF) method. In order to reduce timing discrimination error and achieve high ranging accuracy, gray-value distance correction and temperature correction are proposed, and are realized with a field programmable gate array (FPGA) in a real-time application. The ranging performances—such as the maximum ranging distance, the range standard deviation, and the ranging accuracy—are theoretically calculated and experimentally studied. By means of these proposed correction methods, the verification experimental results show that the achievable effective ranging distance can be up to 8.08 m with a ranging accuracy of less than ±11 mm. The improved performance shows that the designed laser rangefinder can satisfy on-line ranging applications with high precision, fast ranging speed, small size, and low implementation cost, and thus has potential in the areas of robotics, manufacturing, and autonomous navigation.
Optically driving liquid crystal displays (ODLCDs) are widely applied in display and optical devices due to their long axis of liquid crystal (LC) molecules that can be tuned by a photo-alignment layer under exposure polarized light. However, their use remains challenging due to their long rewriting time and response time. In this work, the rewriting time and the response time of an ODLCD depending on mesoporous silica nanoparticles (MSNs) doped in azo-dye (SD1) and LC 5CB were studied. Among the different concentration ratios of SD1-MSNs (1-0 to 1-0.1), a ratio of 1-0.07 was optimal, decreasing the rewriting time by 40 s (from 69.1 to 29.6 s). Meanwhile, the response time was improved 10 times with MSNs doped into 5CB.
Information security has become a crucial concern in our daily lives, with numerous advanced strategies developed for information protection and data security. Liquid crystal (LC) has emerged as one of the most attractive candidates for information encryption due to its highly efficient modulation of phase, wavelength, and polarization. However, multi-channel anti-counterfeiting LC devices are typically confined to rigid glass substrates, and achieving such functionality through simple fabrication processes and low-energy stimuli remains a challenge. Herein, a novel twist nematic liquid crystal polymer (LCP) film for multidimensional and flexible information encryption is proposed. Two distinct patterns are written into top and bottom substrates via photomasks created with an ordinary printer. These two pieces of encoded information can be independently displayed by rotating the sample or analyzer. Through ultraviolet photo-crosslinking, the LCP in the cell is solidified into a film, which can then be detached and transferred onto various substrates. This research demonstrates that dual-channel LCP films have promising prospects in wearable devices, flexible displays, data storage, and information encryption.
The pumping of photoluminescent dye to emit in a cholesteric liquid crystal (CLC)-host is characterized by advanced tunable magnitude and phase, and the incorporation of nanomaterials into CLC-hosts results in the enhancement of emission. Herein, we prepared hetero-structured NiO/ZnO nanoparticles (NPs) in CLC-host and investigated their potential for synergistic dye pumping. The hetero-structured NiO/ZnO NPs blending CLCs exhibited a comparably high photonic bandgap and thermal stability over the temperature range from 30 to 38 °C. It is hypothesized that the hetero-structured NiO/ZnO NPs facilitate the transfer of electrons and holes, which is thought to be enhanced due to their differing bandgaps with the photoluminescent 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) and will result in a synergistic enhancement of DCM emission. In comparison to the incorporation of NiO NPs and ZnO NPs in CLC hosts, the emission of DCM in the 0.05 wt. % hetero-structured NiO/ZnO NPs blending CLCs was characterized by a high slope efficiency of 28.07%, long time-emission over the 1-h observation period, and high thermal emission below 38 °C. It is noteworthy that these findings demonstrate the potential of hetero-structured NiO/ZnO NPs in CLC-hosts to achieve augmented emission intensity at reduced energy pumping, which could facilitate the development of novel LC lasers.
Using the finite element method and the heat conduction equation, the temperature, stress, and end-face deformation in Tm:YAP crystal under high pump power were analyzed. Combined with gradient doping technology, an effective way to improve the internal heat distribution of the crystal was studied. The results showed that when the total pump power was 200 W, under the same cooling conditions, the maximum temperature difference inside Tm:YAP decreased from 58 K to 25 K after gradient doping. The thermal stress and end-face thermal deformation were also significantly improved. In addition, a reasonable micro-channel structure also effectively removed the heat generated inside the crystal.