Titanium and its alloys are characterized by high mechanical strength, good corrosion resistance, high biocompatibility and relatively low Young’s modulus. For many years, one of the most commonly used and described titanium alloys has been Ti-6Al-4V. The great interest in this two-phase titanium alloy is due to the broad possibilities of shaping its mechanical and physico-chemical properties using modern surface engineering techniques. The high coefficient of friction and tendency to galling are the most important drawbacks limiting the application of this material in many areas. In this regard, such methods as carburizing, nitriding, oxidation, and the synthesis of thin films using physical vapor deposition (PVD) and chemical vapor deposition (CVD) methods may significantly improve the tribological properties of titanium alloys. The influence of thermo-chemical treatment (oxidation, carburizing and nitriding) on tribological properties and corrosion resistance of Ti-6Al-4V alloy is presented in this paper. The results include metallographic studies, analysis of tribological and mechanical properties and corrosion resistance as well. They indicate significant improvements in mechanical properties manifested by a twofold increase in hardness and improved corrosion resistance for the oxidation process. The carburizing was most important for reducing the coefficient of friction and wear rate. The nitriding process had the least effect on the properties of Ti-6Al-4V alloy.

Electromagnetic radiation can have a negative effect on electronic circuits, for example, by disrupting their work and communication. Therefore, there is a need to reduce or eliminate electromagnetic interference using shields. This paper focuses on using waste materials in the form of iron scale, which is easy and inexpensive to obtain for shielding. Iron scale is the result of gaseous or aqueous corrosion, due to which a superficial layer of metal oxides formed on the surface of heated metal objects as a result of their contact with air or water during an industrial process is developed. In this study, morphology, chemical, and phase composition measurements were carried out. The results show that all the iron-based materials investigated are mainly composed of iron oxides and pure iron. The polymer–iron composites with different quantitative and qualitative compositions were prepared to verify the shielding effectiveness. The electrical resistance, impact strength, and magnetic properties were measured, and dynamic mechanical thermal analysis and tensile strength tests were performed. The tests confirmed the suitability of iron scale for the construction of electromagnetic field shielding material. Iron scale is cheap and easy to obtain from iron-based waste materials. The developed composites are easy to form and use recycled material.

Acrylate polymer-based bone cements constitute the most popular bonding agents used in regenerative surgery. Due to their inferior biocompatibility, however, these materials are often enriched with ceramic additives including hydroxyapatite (HAp). The aim of this paper was to perform a comparative study of the acrylate cements filled with different content (3–21%) of nano- and microscale hydroxyapatite. The work concerns a comparison of times and temperatures of the cross-linking reaction, as well as morphology, glass transition temperature, and principal mechanical properties of the resulting composites. Before being used as a filler, both HAp forms were subjected to an in-depth characterization of their morphology, specific surface area, pore size distribution, and wettability as well as chemical composition and structure. For that purpose, such analytical techniques as scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, tensiometry, Brunauer–Emmett–Teller surface area analysis, differential scanning calorimetry, Shore D hardness test, and Charpy impact test were used. The results indicated a drop of cross-linking temperature and an extension of setting time with the addition of µHAp. The µHAp-filled acrylate composites were characterized by a globular surface morphology, higher glass transition temperature, and lower hardness and impact strength compared to nHAp-filled materials. This relationship was evident at higher nHAp concentrations.