Barium tungstate (BaWO4) powders with various sintering temperatures, and BaWO4:Dy3+ phosphor samples with concentrations of different rare-earth (RE) activator ions (Dy3+, Sm3+, Tb3+) were prepared through co-precipitation. The structural, morphological, and photoluminescent characteristics of barium tungstate phosphors depend on the concentration of RE ions. The crystallographic characteristics of the synthesized BaWO4 were analyzed using X-ray diffraction (XRD) patterns. The size and shape of the crystalline particles were estimated based on images measured with a field emission scanning electron microscope (FE-SEM). As the sintering temperature of the BaWO4 particles increased from 400 °C to 1000 °C, the size of the particles gradually increased and showed a tendency to clump together. In the sample doped with 7 mol % Dy3+ ions, the intensity of all emission bands reached their maximum. The emission spectra of the RE3+-doped BaWO4 powders by excitation at 325 nm were composed of yellow (Dy3+), red (Sm3+), and green (Tb3+) band at 572, 640, and 544 nm. This indicates that most of the RE3+ ions absorbed the position without reversal symmetry in the BaWO4 lattice. These results propose that strong emission intensity and tunable color for the phosphors can be accomplished by rare-earth doped host with an suitable quantity. In addition, the phosphor thin films, having high transparency from aqueous colloidal solutions, were deposited on banknotes, and it is considered whether it is suitable for anti-counterfeiting applications.
A precursor was prepared using a co-precipitation method to synthesize crystalline calcium tungstate. The prepared precursor was dried in an oven at 80 °C for 18 h. The dried powders, prepared without a heat treatment process, were observed in XRD analysis to be a crystalline CaWO4 phase, confirming that the synthesis of crystalline CaWO4 is possible even at low temperature. To use this crystalline CaWO4 as a light emitting material, rare earth ions were added when preparing the precursor. The CaWO4 powders doped with terbium (Tb3+) and europium (Eu3+) ions, respectively, were also observed to be crystalline in XRD analysis. The luminescence of the undoped CaWO4 sample exhibited a wide range of 300~600 nm and blue emission with a central peak of 420 nm. The Tb3+-doped sample showed green light emission at 488, 545, 585, and 620 nm, and the Eu3+-doped sample showed red light emission at 592, 614, 651, and 699 nm. Blue, green, and red CaWO4 powders with various luminescence properties were mixed with glass powder and heat-treated at 600 °C to fabricate a blue luminescent PiG disk. In addition, a flexible green and red light-emitting composite was prepared by mixing it with a silicone-based polymer. An anti-counterfeiting application was prepared by using the phosphor in an ink, which could not be identified with the naked eye but can be identified under UV light.
The precursor prepared by co-precipitation method was sintered at various temperatures to synthesize crystalline manganese tungstate (MnWO4). Sintered MnWO4 showed the best crystallinity at a sintering temperature of 800 °C. Rare earth ion (Dysprosium; Dy3+) was added when preparing the precursor to enhance the magnetic and luminescent properties of crystalline MnWO4 based on these sintering temperature conditions. As the amount of rare earth ions was changed, the magnetic and luminescent characteristics were enhanced; however, after 0.1 mol.%, the luminescent characteristics decreased due to the concentration quenching phenomenon. In addition, a composite was prepared by mixing MnWO4 powder, with enhanced magnetism and luminescence properties due to the addition of dysprosium, with epoxy. To one of the two prepared composites a magnetic field was applied to induce alignment of the MnWO4 particles. Aligned particles showed stronger luminescence than the composite sample prepared with unsorted particles. As a result of this, it was suggested that it can be used as phosphor and a photosensitizer by utilizing the magnetic and luminescent properties of the synthesized MnWO4 powder with the addition of rare earth ions.
In this study, terbium and europium rare-earth ions were single-doped and co-doped to synthesized SoMoO4 phosphor at room temperature. The samples prepared synthesized crystalline SrMoO4 powder by the co-precipitation. Samples had a tetragonal structure in XRD analysis and d(112) spacing was changed by rare-earth doping. As the amount of rare earth added increased, a secondary phase appeared, and the structure changed. The synthesized SrMoO4:Tb3+ phosphors showed a green light emission at 544 nm under 287 nm, SrMoO4:Eu3+ phosphors showed a red light emission at 613 nm under 290 nm, and SrMoO4:[Eu3+]/[Tb3+] phosphor showed a yellow-white light emission at 544 and 613 nm when excited at 287 nm. The synthesized phosphor exhibited a change in green and red luminescence intensity based on the amount of Eu3+ doped and showed strong red luminescence as the Eu3+ doping increased. To use the SrMoO4:[Eu3+]/[Tb3+] phosphor with these characteristics in an LED color filter, a flexible composite prepared by mixing with PDMS showed green, red, and yellow-white emission under a UV-lamp.