Machining processes produce unwanted remainders of material on the free edges which are called burrs. In particular, the drilling process generates an entry burr and a typically larger exit burr. When drilling stacks of several workpieces, exit and entry burrs are produced simultaneously at the interfaces. The presence of burrs can degrade the static and fatigue strength of the parts and assemblies containing them. An example concerns the burrs formed at the interface during the drilling of multistacks in One-Way-Assembly processes, where deburring is not systematically applied. The effect on fatigue can be significant. Reductions of up to 70% in fatigue life have been reported, even though the explanatory rationale is not clear. This article reviews existing works on burrs, focusing on drilling burrs. A description of the morphology of different types of burrs and of measurement technologies is given. Burr formation mechanisms and their modeling are reviewed. Burr control strategies and the main deburring technologies are examined. The limited literature on the effects of burrs on the static and fatigue strength of mechanical assemblies is also explored.
Understanding the interactions between biofilm and cementitious materials in biogas production systems is an essential step toward the development of durable concrete for this expanding sector. Although the action of the liquid phase medium on the material has been the subject of several research studies, the possible impact of the material’s properties on biofilm formation and composition has been little investigated, if at all. The aim of this paper is to evaluate the characteristics of the biofilm according to the surface properties of the materials. Four cementitious materials with different chemical and mineralogical compositions, and various topological surface characteristics (pastes of CEM I, CEM III/C and CAC, and CEM I paste treated with oxalic acid) were exposed to the liquid phase of a fermenting biowaste for 10 weeks. The steps of biofilm formation were observed using SEM. Even though all the cementitious material surfaces were intensely colonized at the end of the experiments, the establishment of the biofilm seems to have been delayed on the oxalate-treated CEM I and on CAC coupons. Roughness and surface pH effects were not of prime importance for the biofilm development. The analysis of bacterial population diversity using 16S rDNA sequencing showed a less diversified microbial flora in the biofilm than in the reaction medium.
9 October 2024 in Journal of Manufacturing Processes
In this study low-frequency chatter during machining of inclined surfaces with ball-end mills is experimentally investigated. An explanation of genesis of low-frequency vibrations have been proposed for various conditions: cutting direction, lead angle values, spindle speed, depth of cut. As a result, it has been proven that low-frequency chatter has more significant effect on machined surface than usual chatter. Low-frequency chatter occurs during downward milling, rather than upward milling, especially when lead angle increases. Furthermore, low-frequency chatter takes place in the beginning of cutting process, thereafter develops into steady state of usual chatter, which has no such significant effect on machined surface, as it has been shown. The results are in line with the supposition that low frequency vibrations are caused by sudden and irregular nature of shearing process, when magnitude is small.