Giant barocaloric effects were recently reported for spin-crossover materials. The volume change in these materials suggests that the transition can be influenced by uniaxial stress, and give rise to giant elastocaloric properties. However, no measurements of the elastocaloric properties in these compounds have been reported so far. Here, we demonstrated the existence of elastocaloric effects associated with the spin-crossover transition. We dissolved particles of ([Fe(L)₂](BF₄)₂, [L=2,6di(pyrazol-1-yl)pyridine]) into a polymeric matrix. We showed that the application of tensile uniaxial stress to a composite film resulted in a significant elastocaloric effect. The elastocaloric effect in this compound required lower applied stress than for other prototype elastocaloric materials. Additionally, this phenomenon occurred for low values of strain, leading to coefficient of performance of the material being one order of magnitude larger than that of other elastocaloric materials. We believe that spin-crossover materials are a good alternative to be implemented in eco-friendly refrigerators based on elastocaloric effects.

Structural martensitic transformations enable various applications, which range from high stroke actuation and sensing to energy efficient magnetocaloric refrigeration and thermomagnetic energy harvesting. All these emerging applications benefit from a fast transformation, but up to now their speed limit has not been explored. Here, we demonstrate that a thermoelastic martensite to austenite transformation can be completed within 10 ns. We heat epitaxial Ni-Mn-Ga films with a nanosecond laser pulse and use synchrotron diffraction to probe the influence of initial temperature and overheating on transformation rate and ratio. We demonstrate that an increase in thermal energy drives this transformation faster. Though the observed speed limit of 2.5 × 10²⁷ (Js)¹ per unit cell leaves plenty of room for further acceleration of applications, our analysis reveals that the practical limit will be the energy required for switching. Thus, martensitic transformations obey similar speed limits as in microelectronics, as expressed by the Margolus – Levitin theorem. GRAPHICAL ABSTRACT

Magnetic shape memory alloys exhibit various multifunctional properties, which range from high stroke actuation and magnetocaloric refrigeration to thermomagnetic energy harvesting. Most of these applications benefit from miniaturization and a single crystalline state. Epitaxial film growth is so far only possible on some oxidic substrates, but they are expensive and incompatible with standard microsystem technologies. Here, epitaxial growth of Ni–Mn–based Heusler alloys with single crystal‐like properties on silicon substrates is demonstrated by using a SrTiO₃ buffer. It is shown that this allows using standard microfabrication technologies to prepare partly freestanding patterns. This approach is versatile, as its applicability for the NiTi shape memory alloy is demonstrated and spintronic and thermoelectric Heusler alloys are discussed. This paves the way for integrating additional multifunctional effects into state‐of‐the‐art microelectronic and micromechanical technology, which is based on silicon.

Understanding the martensitic microstructure in nickel–titanium (NiTi) thin films helps to optimize their properties for applications in microsystems. Epitaxial and single-crystalline films can serve as model systems to understand the microstructure, as well as to exploit the anisotropic mechanical properties of NiTi. Here, we analyze the growth of NiTi on single-crystalline MgO(100) and Al₂O₃(0001) substrates and optimize film and buffer deposition conditions to achieve epitaxial films in (100)- and (111)-orientation. On MgO(100), we compare the transformation behavior and crystal quality of (100)-oriented NiTi films on different buffer layers. We demonstrate that a vanadium buffer layer helps to decrease the low-angle grain boundary density in the NiTi film, which inhibits undesired growth twins and leads to higher transformation temperatures. On Al₂O₃(0001), we analyze the orientation of a chromium buffer layer and find that it grows (111)-oriented only in a narrow temperature range around 500 ^∘C. By depositing the Cr buffer below the NiTi film, we can prepare (111)-oriented, epitaxial films with transformation temperatures above room temperature. Transmission electron microscopy confirms a martensitic microstructure with Guinier Preston-zone precipitates at room temperature. We identify the deposition conditions to approach the ideal single crystalline state, which is beneficial for the analysis of the martensitic microstructure and anisotropic mechanical properties in different film orientations.