Xing Chaoyang

Xing Chaoyang


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 October 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
YLYang Liu
Yang Liu
Zhenyu YuanZhenyu Yuan
Zhenyu Yuan
ZZzhang renze renze Zhang
zhang renze renze Zhang
HJHanyang Ji
Hanyang Ji
XCXing Chaoyang
Xing Chaoyang
Fanli MengFanli Meng
Fanli Meng
Ammonia is harmful to human health, however, the detection limit of the sensor based on traditional semiconductor gas sensors is high and the speed is slow. Constructing heterostructure is an effective method to improve the performance of sensors. In this article, 1-D MoO 3 nanorods and SnO 2 nanoparticles are successfully combined to obtain MoO 3 /SnO 2 nanocomposite. The 1-D structure can increase the speed of electron transport, while the nanoparticles on the surface increase the specific surface area, more importantly, the structure maximizes the interface area between the two materials which can transfer electronic more efficiently. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and Barrett–Joyner–Halenda (BJH) are used to analyze the microstructure and elemental composition of MoO 3 /SnO 2 . The diameter of MoO 3 /SnO 2 nanocomposite is approximately 200 nm and the distribution is uniform. The response of MoO 3 /SnO 2 nanocomposite to 100-ppm NH 3 is 12.7 at 280 °C, and the response/recovery time is 13/2 s. The detection limit for NH 3 can reach 10 ppb (response 1.3), which enables rapid detection of NH 3 at low concentration. Electron transport requires more energy to overcome the contact barrier between pure SnO 2 nanoparticles, which can also lead to electron emission and noise increase. However, the sensitive electrons of MoO 3 /SnO 2 nanocomposite can transmit electrons along the 1-D rod-like structure of MoO 3 , which undoubtedly accelerates the efficiency of electron transmission. Moreover, n-n heterojunction formed between MoO 3 and SnO 2 to bend the SnO 2 band and show better sensitivity to NH 3 . Therefore, MoO 3 /SnO 2 nanocomposite shows a low detection limit and a rapid response/recovery speed. Nevertheless, the nanoparticles on the surface of MoO 3 /SnO 2 nanocomposite begin to agglomerate with the increase of SnO 2 content, which leads to the decrease of gas-sensitive response. The formation process of MoO 3 /SnO 2 composites is also discussed in this article. The excellent gas sensing results show that MoO 3 /SnO 2 composites are a promising gas sensing material.

22 April 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
WQWenbo Qin
Wenbo Qin
ZZzhang renze renze Zhang
zhang renze renze Zhang
Zhenyu YuanZhenyu Yuan
Zhenyu Yuan
XCXing Chaoyang
Xing Chaoyang
Fanli MengFanli Meng
Fanli Meng
Perovskite LaFeO 3 materials have received increasing attention in volatile organic compound (VOC) gas detection due to their unique crystal structure and excellent physicochemical properties. However, achieving high sensitivity with a low limit of detection at low temperature is still an important research topic. In this work, p-LaFeO 3 /n-Fe 2 O 3 composites were prepared by a simple one-step hydrothermal method for the detection of acetone gas. Various characterizations showed that the LaFeO 3 /Fe 2 O 3 composites were successfully synthesized. The test results showed that the LaFeO 3 /Fe 2 O 3 composites have more excellent gas sensing properties than acetone compared with pure LaFeO 3 material. The response of the LaFeO 3 /Fe 2 O 3 sensor to 10 ppm acetone (23.5) at 210 °C is almost five times larger than that of the pure LaFeO 3 material. In addition, the LaFeO 3 /Fe 2 O 3 sensor has a low limit of detection (100 ppb), good long-term stability, and selectivity. The enhanced acetone sensing performance can be ascribed to changes in the electronic structure and surface properties caused by heterojunctions, as well as to the synergistic effect formed between the two components. This work provides a simple synthetic strategy to enhance the acetone gas sensing performance of perovskite-type LaFeO 3 , which has promising applications in industrial production and healthcare.

26 October 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
YLYudong Li
Yudong Li
Zhenyu YuanZhenyu Yuan
Zhenyu Yuan
Fanli MengFanli Meng
Fanli Meng
Yanbai ShenYanbai Shen
Yanbai Shen
XCXing Chaoyang
Xing Chaoyang
N-propanol has multiple potentially hazardous properties such as explosive, toxic, and flammable. Due to the critical application of n-propanol in industrial solvents, a reliable and stable chemical sensor is needed to detect n-propanol effectively. This paper reports a gas sensor based on Zn 2 SnO 4 /SnO 2 prepared by a simple co-precipitation method for n-propanol detection. Electrical test results show that the gas sensor designed in this paper achieves rapid detection of n-propanol with a lower detection limit of up to 0.5 ppm and outstanding stability. The performance improvement may be attributed to the fact that Zn 2 SnO 4 as a promoter and framework effectively enhances the gas-sensitive performance of SnO 2 for alcohols and achieves further segmentation of alcohol detection.

8 May 2024 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
SLShiqing Lv
Shiqing Lv
YLYang Liu
Yang Liu
YXYuxiong Xue
Yuxiong Xue
XZXuewei Zhao
Xuewei Zhao
NLNannan Li
Nannan Li
XCXing Chaoyang
Xing Chaoyang

21 December 2020 in Sensors
Verified
Journal Article
Open access
PDF file
YSyufei sun
yufei sun
PGPeng Guo
Peng Guo
LFLihui Feng
Lihui Feng
XCXing Chaoyang
Xing Chaoyang
JWJunjie Wu
Junjie Wu
To reduce the impact of acoustic interference in a microelectromechanical system (MEMS) gyroscope and to improve the reliability of output data, a filtering algorithm based on orthogonal demodulation is proposed. According to the working principle and failure mechanism of a MEMS gyroscope, the sound and angular velocity frequencies are not identical, which lead to a different frequency signal output of the original single-channel demodulation scheme. Therefore, a Q channel demodulation filtering process was added to the origin single-channel demodulation scheme. For the Q channel demodulated signal, a Hilbert transform was used to compensate for the 90 degree phase shift. The IQ dual-channel difference can remove the acoustic interference signal. The simulation results indicate that the scheme can effectively suppress the acoustic interference signal and it can eliminate more than 95% of the impact of sound waves. We assembled the acoustic interference experimental platform, collected the driving and sensing data, and verified the denoising performance with our algorithm, which eliminated more than 70% of the noise signal. The simulation and experimental results demonstrate that the scheme can eliminate acoustic interference signal without destroying angular velocity signal.

11 September 2023
Verified
Conference Paper
Closed access
XCXing Chaoyang
Xing Chaoyang
YZYi Zhong
Yi Zhong
NSNan Sun
Nan Sun
LJLu Jie
Lu Jie
This work proposes a continuous-time incremental zoom ADC with an on-chip $2^{\mathrm{n}\mathrm{d}}$-order decimation filter. It adopts a $2^{\mathrm{n}\mathrm{d}}$-order RT-DEM technique to eliminate DAC mismatch with a customized bidirectional circular shift register, and the quiet chopping technique to achieve high input impedance. The prototype ADC presents 91.6dB SNDR over an 88kHz bandwidth, consuming only $437\mu \mathrm{W}$ of power.