This study investigates the sensitive region and safe operation voltage of single-event burnout (SEB) in lateral depletion-mode Ga2O3 MOSFET devices via technology computer aided design simulation. Based on the distribution of the electric field, carrier concentration, and electron current density when SEB occurs, the radiation damage mechanism of SEB is proposed. The mechanism of SEB in Ga2O3 MOSFET was revealed to be the result of a unique structure without a PN junction within it, which possesses gate control ability and exerts a significant influence on the conduction of the depletion region.
A comparison of the microstructure, interfacial IMC layer, shear behavior and hardness of the Sn58Bi, SnBi@110P-Cu/Cu and SnBi@500P-Cu/Cu solder joints was carried out during isothermal aging in this study. Experimental results reveal that the regions enclosed by Cu frames in SnBi@110P-Cu/Cu exhibit more refined microstructure and higher hardness before and after aging. In contrast, the hardness of the aged SnBi@500P-Cu solder bulk is closer to the SnBi eutectic solder due to their similar microstructure. With the aging time prolonging, β-Sn and Bi-rich phases do not only coarsen in solder joints, but also lead to the rise of the thickness of the interfacial IMC layers. The addition of porous Cu can suppress the formation of voids at the soldering interface and improves the shear strength of the SnBi/Cu solder joints during the aging process. The shear strength of the SnBi@500P-Cu/Cu solder joint is higher than the other two before and after aging.
8 May 2024 in Journal of Materials Science: Materials in Electronics