The natural properties of oils and fats do not always allow for their direct use in industry (e.g., for food, cosmetics, and pharmaceuticals). Furthermore, such raw materials are often too expensive. Nowadays, the requirements for the quality and safety of fat products are increasing. For this reason, oils and fats are subjected to various modifications that make it possible to obtain a product with the desired characteristics and good quality that meets the needs of product buyers and technologists. The modification techniques of oils and fats change their physical (e.g., raise the melting point) and chemical properties (e.g., fatty acid composition). Conventional fat modification methods (hydrogenation, fractionation, and chemical interesterification) do not always meet the expectations of consumers, nutritionists, and technologists. In particular, Hydrogenation, while it allows us to obtain delicious products from the point of view of technology, is criticised for nutritional reasons. During the partial hydrogenation process, trans-isomers (TFA), dangerous for health, are formed. One of the modifications that meets current environmental requirements and trends in product safety and sustainable production is the enzymatic interesterification of fats. The unquestionable advantages of this process are the wide spectrum of possibilities for designing the product and its functional properties. After the interesterification process, the biologically active fatty acids in the fatty raw materials remain intact. However, this method is associated with high production costs. Oleogelation is a novel method of structuring liquid oils with small oil-gelling substances (even 1%). Based on the type of oleogelator, the methods of preparation can differ. Most oleogels of low molecular weight (waxes, monoglycerides, and sterols) and ethyl cellulose are prepared by dispersion in heated oil, while oleogels of high molecular weight require dehydration of the emulsion system or solvent exchange. This technique does not change the chemical composition of the oils, which allows them to keep their nutritional value. The properties of oleogels can be designed according to technological needs. Therefore, oleogelation is a future-proof solution that can reduce the consumption of TFA and saturated fatty acids while enriching the diet with unsaturated fatty acids. Oleogels can be named “fats of the future” as a new and healthy alternative for partially hydrogenated fats in foods.

According to international health and food organizations and authorities, people should limit fat intake since fat is the most caloric component of food and it is often a source of unsafe saturated fatty acids (FA) and trans isomers. The greatest health benefits come from replacing shorts with dietary fiber molecules. The aim of the study was to determine the possibility of reducing shortening content, which has an undesirable profile of FA, by addition of β-glucan molecules in shortbread biscuits. The effect of oat and yeast β-glucan supplementation on physical and sensory quality of products with reduced fat content (max 15%) were studied. It was shown that the substitution of shortening by β-glucan in shortbread biscuits is possible to a limited extent. Reduction in product energy value (up to 36 kcal/100 g) and content of undesirable FA (maximum 2.1 g/100 g) and increased of β-glucan content, regardless of the type, caused deterioration of biscuits quality and affected changes during storage. The substitution of shortening by β-glucan in food is a good way to improve nutritional value by increasing the amount of dietary fiber molecules, reducing calories, and amount of SFA in diets.

Because potentially harmful trans fatty acids (TFAs) should be eliminated from the diet, each country should have updated estimates of TFA content in food. The purpose of the study was to ...

The aim of this study was to perform the partial replacement of bakery fat with barley β-glucan in muffins and to determine its effect on the physical properties of products. Most shortenings used in the industry are solid fats rich in saturated fatty acids and often trans fatty isomers, which are nutritionally unfavorable. Dough and baked muffins were used as the research material. Five muffin recipes were prepared: control (K0%) with 16% fat content in the total dough weight, with fat content decreased by 10% (PG10%), 15% (PG15%), 20% (PG20%) and 25% (PG25%). β-glucan was used as a fat replacer in the 1:4 ratio. The parameters determining the physical characteristics and sensory attributes were measured, compared and statistically analyzed using a principal component analysis (PCA) method. Although the partial replacement of shortening with barley β-glucan is possible, it may negatively influence the physical properties of dough (aeration) and baked products (volume, density). It has been observed that increasing the content of this fat replacer enlarges the pores of the crumb. The textural properties of muffins with a fat content decreased by 20% are most similar to the control. Moreover, it has been shown that the overall sensory quality goes down when the amount of fat replacer in the muffin recipe is increased. However, adding β-glucan to products in which fat content was decreased by 10% did not influence significantly the typical taste. Despite the adverse effect of β-glucan on the physical and sensorial properties, it was found to be reasonable to use it even in small amounts (up to 10%) to increase the nutritional value of products.

The purpose of this work was to determine the possibility of using high-oleic sunflower oil for the production of biscuits. Additives (inulin, β-glucan, lecithin) were introduced into the formulation to improve the quality and nutritional properties of products. Additives had a positive impact on the volume growth of products with oil, although the effect was lower than of biscuits with shortening. The breaking strength of biscuits with oil was greater than that of the ones with shortening, except products with the addition of lecithin. Inulin affected lightness of color, whereas replacement of shortening with oil darkened the color and caused the total color difference (ΔE) to be significantly different from that of the control sample. The fat migration was maximum from products in which oil was used without additives. Based on sensory evaluation, biscuits with oil – inulin and lecithin – which in the evaluation of overall quality scored 8/10 and 7.9/10, respectively, proved closest to the control sample. It was observed that the sensory quality of cookies significantly improved with the inclusion of lecithin.