Małgorzata Katarzyna Kowalska

Prof. Małgorzata Katarzyna Kowalska

University of Technology and Humanities in Radom
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
Małgorzata Katarzyna KowalskaMałgorzata Katarzyna Kowalska
Małgorzata Katarzyna Kowalska
MWMagdalena Woźniak
Magdalena Woźniak
MKMichał Kijek
Michał Kijek
PMPaulina Mitrosz
Paulina Mitrosz
JSJerzy Szakiel
Jerzy Szakiel
PTPaweł Turek
Paweł Turek
The work mainly focused on a validation of the method for determining the content of salicylic acid and individual unknown impurities in new pharmaceutical product—tablets containing: 75, 100 or 150 mg of acetylsalicylic acid and glycine in the amount of 40 mg for each dosage. The separation of the components was carried out by means of HPLC, using a Waters Symmetry C18 column (4.6 × 250 mm, 5 μm) as the stationary phase. The mobile phase consisted of a mixture of 85% orthophosphoric acid, acetonitrile and purified water (2:400:600 V/V/V). Detection was carried out at a wavelength of 237 nm, with a constant flow rate of 1.0 ml min−1. In order to verify the method, linearity, precision (repeatability and reproducibility), accuracy, specificity, range, robustness, system precision, stability of the test and standard solution, limit of quantification and forced degradation were determined. Validation tests were performed in accordance with ICH (International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use) guidelines. The method was validated successfully. It was confirmed that the method in a tested range of 0.005–0.40% salicylic acid with respect to acetylsalicylic acid content is linear, precise and accurate.

21 August 2021 in Molecules
Verified
Journal Article
Open access
PDF file
WKWanda Kudełka
Wanda Kudełka
Małgorzata Katarzyna KowalskaMałgorzata Katarzyna Kowalska
Małgorzata Katarzyna Kowalska
MPMarzena Popis
Marzena Popis
The content of protein, moisture content and essential amino acids in conventional and genetically modified soybean grain and selected soybean products (soybean pâté, soybean drink, soybean dessert, tofu) was analyzed in this paper. The following comparative analysis of these products has not yet been carried out. No differences were observed in the amino acid profiles of soybeans and soybean products. The presence of essential amino acids was confirmed except for tryptophan. Its absence, however, may be due not to its absence in the raw material, but to its decomposition as a result of the acid hydrolysis of the sample occurring during its preparation for amino acid determination. Regardless of the type of soybean grain, the content of protein, moisture content and essential amino acids was similar (statistically insignificant difference). Thus, the type of raw material did not determine these parameters. There was a significant imbalance in the quantitative composition of essential amino acids in individual soybean products. Only statistically significant variation was found in genetically modified and conventional soybean pâté. Moreover, in each soy product their amount was lower irrespective of the raw material from which they were manufactured. Therefore, the authors indicate the necessity of enriching soybean products with complete protein to increase their nutritional value.

8 June 2020 in Agriculture
Verified
Journal Article
Open access
PDF file
MKMilena Kupiec
Milena Kupiec
AŻAnna Żbikowska
Anna Żbikowska
Katarzyna Marciniak-LukasiakKatarzyna Marciniak-Lukasiak
Katarzyna Marciniak-Lukasiak
Małgorzata Katarzyna KowalskaMałgorzata Katarzyna Kowalska
Małgorzata Katarzyna Kowalska
The aim of the study was to analyze the effect of the type of gelling substance on the selected physicochemical properties of oleogels. Rapeseed oil (RO) and 5% w/w of one of the following structuring compounds (SC) were used for their production waxes: sunflower (SUN), candelilla (CAN), bees white (BW), bees yellow (BY), or monoacylglycerols (MAG). The ability of SC to form a network in RO was assessed on the basis of an analysis of the texture of oleogels (hardness and spreadability test, stability determined by the centrifugal method). Oxidative stability was determined using the Rancimat test. In addition, the microstructure of an oleogel samples was observed at a magnification of 600 times in polarized light and in a bright field. Differences in the brightness and color of the samples were also assessed using the CIELab reflection method. The highest hardness (5.52 N) and physical stability (99.67%) were found in oleogel with candelilla wax. A higher value of the force causing deformation of the sample indicates a denser network of oil gel, which was confirmed by the microscopic images analyzed in the work. The organogel with CAN had the shortest (on average 8.49 nm) and the most regularly distributed crystals compared to other samples. The lowest values of organogel strength and spreadability test parameters (e.g., firmness, work of shear, stickness, work of adhesion), which were respectively 0.73 N, 4.39 N, and 9.74 N mm, while −4.87 N and −2.68 N mm were obtained with the variant, which was yellow beeswax. Considering the texture results obtained and the centrifugal stability, it was found that organogels with yellow beeswax were characterized by the worst structuring of rapeseed oil. Sunflower wax was considered the best among the analyzed gelling agents (under the conditions of the experiment). The organogel with its 5% w/w share was distinguished by the closest to the white color and texture most reminiscent of cream. In addition, it had the highest work of shear value and the longest induction time (6.8 h) in the Rancimat test.

23 June 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AŻAnna Żbikowska
Anna Żbikowska
Iwona SzymańskaIwona Szymańska
Iwona Szymańska
Małgorzata Katarzyna KowalskaMałgorzata Katarzyna Kowalska
Małgorzata Katarzyna Kowalska
The influence of the amount of inulin addition (3%, 6%, 9%, 12% or 15% w/w) on the physicochemical properties of natural yogurt was analyzed. The acidity (titration; pH), texture parameters (penetration test), viscosity curves (rotational rheometer), microrheology (macroscopic viscosity index, MVI; elasticity index, EI; solid-liquid balance—SLB; multi-speckle diffusing-wave spectroscopy, MS-DWS) and physical stability (syneresis; LUMiSizer test) of yogurts were investigated. All samples were non-Newtonian pseudoplastic liquids. The sample with 15% inulin content presented an approx. 4% higher pH value (4.34), 3-fold greater MVI and almost 5-fold higher penetration force, compared to the control sample (0% of inulin). In turn, the use of inulin addition in the range of 3–15% w/w resulted in a reduction of syneresis (p < 0.05). A linear decrease in the values of instability indexes and sedimentation velocities was noted in the function of inulin content increase (LUMiSizer test). The application of inulin (in the range of 3–15% w/w) as a functional additive to yogurts significantly contributed to enhancement of their physical stability. Summing up, the possibility of obtaining natural yogurts with a high content of this prebiotic has been demonstrated, thus such products can be classified as functional foods and a health claim can be put on the label.

20 March 2015 in International Journal of Cosmetic Science
Verified
Journal Article
Closed access
PDF file
Małgorzata Katarzyna KowalskaMałgorzata Katarzyna Kowalska
Małgorzata Katarzyna Kowalska
MZM. Ziomek
M. Ziomek
AŻAnna Żbikowska
Anna Żbikowska

25 September 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MFMelánia Feszterová
Melánia Feszterová
Małgorzata Katarzyna KowalskaMałgorzata Katarzyna Kowalska
Małgorzata Katarzyna Kowalska
MMMargaréta Mišiaková
Margaréta Mišiaková
The effect of environmental variables on vitamin C degradation in the analysed plant and vegetable juice samples was investigated. The study focused on samples from chives, dandelion, and nettle, as well as tomato, carrot, cucumber, red and white peppers, and cabbage. The aims of the study were to summarise the impact of storage time, temperature, and packaging materials on antioxidants (using vitamin C as an example) in processing plant and vegetable juices. The vitamin C concentration was tested iodometrically at 0 to 21 days intervals. Storage was carried out at different temperatures (4 °C, 23 °C, −18 °C) and in two selected packaging materials (glass and plastic). The analyses showed that low temperatures (t = 4 °C) and storage in glass containers are best for preserving vitamin C content. Storage time influenced the decrease in vitamin C values, with higher losses accompanying longer storage times. Plastic containers had a shorter shelf life for vitamin C compared to glass containers. In general, high temperatures during processing and storage have a negative effect on the preservation of vitamin C. Therefore, storing juices in the refrigerator and glass containers intended for food applications to minimise vitamin C degradation is important.