Cancer continues to be a leading cause of mortality worldwide, emphasizing the importance of early detection for effective treatment. Macroscopic methods like X‐ray and CT scans offer limited resolution and pose risks due to ionizing radiation exposure. In contrast, microscopic techniques such as histopathology require invasive biopsy samples and lack real‐time diagnostic capabilities. Bridging this gap, THz research offers a promising solution, utilizing nonionizing terahertz radiation to achieve superior resolution. To this end, a proposed microstrip antenna emerges as a cost‐effective and high‐resolution tool for enabling the accurate diagnosis and detection of superficial cancers. This novel approach could revolutionize medical involvement, leading to earlier cancer detection and improved patient outcomes. The THz antenna of size 526 μm × 536 μm designed using Computer Simulation Technology (CST) software radiates at 0.3 THz with a gain of 5 dB. The antenna, when placed in the model replicating human tissue (Phantom model) radiates at 0.88 THz with a return loss of −27 dB and a gain 10 dB. Whereas, the same antenna was designed and simulated with a model replicating human tissue with tumor, radiating at 0.88 THz with a return loss of −38 dB and gain of 9.6 dB. The optimization of the decision was done using the combination of K‐means and logistic regression algorithm to determine 95.06% efficiency.
A novel additive-manufactured antenna for stretchable sensor application is designed, simulated and measured. The fully transparent antenna has air as a substrate and a conductive aluminium metal sheet as a patch. The layers are defined with thin Thermo Poly Urethane (TPU) material, as its flexible/stretchable property doesn't disturb the actual property of air. The air substrate is locked within the flexible TPU with a thickness of 200 microns, and the conducting patch is also dimensioned with the 3D printing method. The stretchable antenna is fabricated with 3D printing technology, considered a dielectric medium, and the conducting medium is a conducting aluminium sheet. Re-configurability is achieved with the pressure level applied over the air–substrate antenna. Hence, the minimal change in shape changes the dielectric constant, thus changing the antenna parameter and radiation pattern. The antenna achieves improved size and performance with a gain of 7.2 dB, a directivity of 7.574 dB, a radiation efficiency of 95.67 %, and a 12:509 front-to-back ratio. The fabricated antenna is tested for its resonant characteristics and radiation properties. This reconfigurable antenna can be used for various applications, including Wireless Local Area Network (WLAN) communication.
Essential steel components with variable cross-section are fabricated from welded plates, which are primarily employed for the growth of the construction industry in beams according to the stress and stiffness requirements of the structure. Lateral-torsional buckling, in which the beam experiences non-uniform twisting and buckling about its weaker axis, is one of the most common failure modes. This dissertation focuses primarily on the lateral-torsional buckle of non-prismatic I-beams. The development of differential equations for deformation analysis of the non-prismatic beam. ANSYS results and deformation equation results are compared to validate the methodology. Using ANSYS, the lateral torsional buckling of a non-prismatic I-beam section with uniformly distributed load is analyzed. In finite element analyses, the solid element approach is used to determine the lateral buckling load for various cross-sections (β = 0.1 to 1.0) by analyzing their behavior. In addition, a stiffener is used to prevent lateral buckling, and the results are compared to a model without stiffeners.
This study investigates the potential of waste Polyurethane Foam (PF) as a lightweight coarse aggregate in concrete, aiming to promote sustainable construction practices by recycling industrial waste. Waste PF was used as coarse aggregate in concrete mixes, replacing 0–80% by volume in 10% increments. These mixes were tested for compressive strength, split tensile strength, and flexural strength. Correlations between compressive, split tensile, and flexural strengths were derived and compared with international code predictions. Additionally, microstructural investigations using Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Analysis (EDAX) were conducted. Furthermore, the embodied carbon dioxide emissions and eco-strength efficiency of the mixes were calculated to evaluate their environmental performance. The results indicate that mixes with 30 to 60% Polyurethane Foam Aggregate (PFA) achieved compressive strengths above 17 MPa and density below 2000 kg/m3, thereby meeting the structural lightweight concrete requirements of ACI 213R, with all mixes showing split tensile and flexural strengths above 2 MPa. A strong correlation was found among mechanical strengths, confirming the reliability of experimental results. SEM images showed enhanced bonding between PFA and the cement matrix. The eco-strength efficiency of polyurethane foam concrete mixes dropped by 24–43% at 30–60% replacement compared to conventional concrete.