Flexible and transparent electronics have been studied intensively during the last few decades. The technique establishes the possibility of fabricating innovative products, from flexible displays to radio-frequency identification tags. Typically, large-area polymeric substrates such as polypropylene (PP) or polyethylene terephthalate (PET) are used, which produces new requirements for the integration processes. A key element for flexible and transparent electronics is the thin-film transistor (TFT), as it is responsible for the driving current in memory cells, digital circuits or organic light-emitting devices (OLEDs). In this paper, we discuss some fundamental concepts of TFT technology. Additionally, we present a comparison between the use of the semiconducting organic small-molecule pentacene and inorganic nanoparticle semiconductors in order to integrate TFTs suitable for flexible electronics. Moreover, a technique for integration with a submicron resolution suitable for glass and foil substrates is presented.
Innovative systems exploring the flexibility and the transparency of modern semiconducting materials are being widely researched by the scientific community and by several companies. For a low-cost production and large surface area applications, thin-film transistors (TFTs) are the key elements driving the system currents. In order to maintain a cost efficient integration process, solution based materials are used as they show an outstanding tradeoff between cost and system complexity. In this paper, we discuss the integration process of ZnO nanoparticle TFTs using a high-k resin as gate dielectric. The performance in dependence on the transistor structure has been investigated, and inverted staggered setups depict an improved performance over the coplanar device increasing both the field-effect mobility and the ION/IOFF ratio. Aiming at the evaluation of the TFT characteristics for digital circuit applications, inverter circuits using a load TFT in the pull-up network and an active TFT in the pull-down network were integrated. The inverters show reasonable switching characteristics and V/V gains. Conjointly, the influence of the geometry ratio and the supply voltage on the devices have been analyzed. Moreover, as all integration steps are suitable to polymeric templates, the fabrication process is fully compatible to flexible substrates.
Zinc oxide nanoparticles (ZnO NP) used for the channel region in inverted coplanar setup in Thin Film Transistors (TFT) were the focus of this study. The regions between the source electrode and the ZnO NP and the drain electrode were under investigation as they produce a Schottky barrier in metal-semiconductor interfaces. A more general Thermionic emission theory must be evaluated: one that considers both metal/semiconductor interfaces (MSM structures). Aluminum, gold, and nickel were used as metallization layers for source and drain electrodes. An organic-inorganic nanocomposite was used as a gate dielectric. The TFTs transfer and output characteristics curves were extracted, and a numerical computational program was used for fitting the data; hence information about Schottky Barrier Height (SBH) and ideality factors for each TFT could be estimated. The nickel metallization appears with the lowest SBH among the metals investigated. For this metal and for higher drain-to-source voltages, the SBH tended to converge to some value around 0.3 eV. The developed fitting method showed good fitting accuracy even when the metallization produced different SBH in each metal-semiconductor interface, as was the case for gold metallization. The Schottky effect is also present and was studied when the drain-to-source voltages and/or the gate voltage were increased.
11 October 2021 in IEEE Transactions on Industry Applications
The soil characterization is one of the major prerequisites in grounding system studies. Along with an adequate measurement procedure and a reliable field data processing, they are responsible for the success in the design and the installation of grounding grids in electrical power systems. In this frame of reference, the purpose of this work is to present an embracing investigation combining in-situ measuring data from soil resistivity and geological survey, supported by the Wenner Method and Standard Penetration Test (SPT). The study is focused on investigating the differences in the apparent soil resistivity interpretation, provided by distinct approaches, identifying the one that better correlates with SPT. Furthermore, a geo-electrical and geo-technical soil characterization is in-depth evaluated, culminating in the derivations among soil resistivity, moisture content and its mechanical properties. The study has a particular application, but not restricted, to electrical substations design, in which a proper soil modeling and representation are mandatory. The obtained results are promising serving as foundation for further investigation.
2 November 2023 in IEEE Industry Applications Magazine
The arguments regarding the usage of dc instead of its counterpart in ac have been discussed for a long time. Aiming for an efficient connection interface for the insertion of renewable energy sources (RESs) on the grid and the reduction of distribution losses, the employment of a low-voltage dc (LVdc) distribution system is considered in this study. For this purpose, the modification of an original low-voltage ac (LVac) distribution system to a dc one, without network rerouting and with minimal adaptations, is proposed. Both systems were implemented in the electric power open source distribution system simulator OpenDSS (open source code) and compared regarding their losses, energy transferred to the loads, voltage drops along the line as well as the number of conductors required for their operation. Moreover, different dc/ac conversion efficiency levels required by the penetration of solar photovoltaic (PV) systems as a RES on the grid were investigated, highlighting the discussion regarding the performance of operation modes.
29 April 2024 in IEEE Transactions on Industry Applications
In the commissioning of high-voltage substations, the determination of the grounding grid resistance stands out. In real-life procedures, usually the involved measurements are carried out considering the guard wires of the transmission lines connected to the substation grounding grid. This issue can lead to an overestimation of the ground current, which may indicate an erroneous unsafe grid condition, in terms of touch and step voltages exposed to human beings. Considering the practical difficulty or impossibility of measuring the portion of the total fault current flowing through the ground, this paper deals with the proposition of a formulation (equation that govern the phenomenon) to estimate the ground current. The proposed simplified approach is based on an optimization method subject to adequate constraints, in which the determination of the substation grid resistance and the equivalent impedance of the guard wires allow estimating the most important parameter: the portion of the total ground-fault current that produces the touch and step voltages. The methodology was compared with results available in the literature and with field tests performed in a real substation.