This article presents the design of a low-cost Wireless Body Sensor Network (WBSN) for monitoring vital signs including a low-cost smart wristwatch that contains an ESP-32 microcontroller and three sensors: heart rate (HR), blood pressure (BP) and body temperature (BT), and an Internet of Things (IoT) platform. The vital signs data are processed and displayed on an OLED screen of the patient’s wristwatch and sent the data over a wireless connection (Wi-Fi) and a Cloud Thing Board system, to store and manage the data in a data center. The data can be analyzed and notified to medical staff when abnormal signals are received from the sensors based on a set parameters from specialists. The proposed low-cost system can be used in a wide range of applications including field hospitals for asymptotic or mild-condition COVID-19 patients as the system can be used to screen those patients out of symptomatic patients who require more costly facilities in a hospital with considerably low expense and installation time, also suitable for bedridden patients, palliative care patients, etc. Testing experiments of a 60-person sample size showed an acceptable accuracy level compared with standard devices when testing with 60 patient-samples with the mean errors heart rate of 1.22%, systolic blood pressure of 1.39%, diastolic blood pressure of 1.01%, and body temperature of 0.13%. According to testing results with 10 smart devices connected with the platform, the time delay caused by the distance between smart devices and the router is 10 s each round with the longest outdoor distance of 200 m. As there is a short-time delay, it does not affect the working ability of the smart system. It is still making the proposed system be able to show patient’s status and function in emergency cases.
This article presents a field-performance investigation on an Integrated Solar Water Supply System (SWSS) at two isolated agricultural areas in Thailand. The two case-study villages (Pongluek and Bangkloy) have experienced severe draughts in recent decades, and, therefore, water supply has become a major issue. A stand-alone 15.36 kW solar power and a 15 kW solar submersible pump were installed along with the input power generated by solar panels supported by four solar trackers. The aim is to lift water at the static head of 64 and 48 m via a piping length of 400 m for each village to be stored in 1000 and 1800 m3 reservoirs at an average of 300 and 400 m3 per day, respectively, for Pongluek and Bangkloy villages. The case study results show that the real costs of electricity generated by SWSS using solar photovoltaic (PV) systems intergraded with the solar tracking system yield better performance and are more advantageous compared with the non-tracking system. This study illustrates how system integration has been employed. System design and commercially available simulation predictions are elaborated. Construction, installation, and field tests for SWSS are discussed and highlighted. Performances of the SWSS in different weather conditions, such as sunny, cloudy, and rainy days, were analysed to make valuable suggestions for higher efficiency of the integrated solar water supply systems.
To reduce carbon dioxide emissions from traditional drying methods, this research investigated the use of microwave technology for drying Standard Thai Rubber (STR) in Thailand. Commercial microwave ovens were modified and integrated with the microwave emitting power control system to maintain the appropriate temperature levels to evaporate the moisture from rubber. Throughout the drying process, the temperature of the rubber was measured both internally and outside. The results revealed that STR5L and STR20 could be dried satisfactorily and met the requirements for standard Thai rubber properties by utilizing 500 W for 140 and 120 min, respectively. By keeping the temperatures less than 150 °C, rubbers’ molecular structure is not destroyed from internal heat stress. Although utilizing less power for a longer period of time is possible, more energy was used, which is unfavorable. Compared to traditional hot air drying technologies, which take approximately 4–6 h for the drying process, microwave technology potentially reduces the drying time by half or more. If solar energy is used to supply electrical energy, 300,000 tons of Carbon dioxide can potentially be eliminated annually in the STR drying industry in Thailand by promoting approximately 1115 MW of Photovoltaic technology installations with the solar resources in southern Thailand.
This study presents a simulation-driven optimization of thermochemical energy storage using SrCl2-based systems for integration with solar energy technologies. Thermochemical sorption systems offer promising potential for enhancing solar energy-storage efficiency by capturing both thermal and electrical energy. However, optimizing sorption processes remains crucial for maximizing energy storage capacity. This work utilized advanced simulation tools to analyze the heat and mass transfer dynamics within SrCl2-EG composites and evaluate system performance under varying compression ratios (CR), reactant temperatures, and heat transfer fluid (HTF) flow rates. The results demonstrate that adjusting CR enhances the overall system efficiency. CR = 4 yields the highest desorption rate of 93.8%, while reducing the required HTF mass flow by nearly tenfold compared to lower CR values. Higher CR contributes to a reduction in sensible heat loss, allowing a greater percentage of thermal energy to be captured. Simulations also show that optimized SrCl2-based systems can integrate effectively with solar energy conversion technologies, making them highly suitable for both energy storage and cooling applications. This research underscores the role of thermochemical energy storage systems in providing more sustainable and efficient solar energy solutions. By reducing energy losses and improving the reliability of the energy storage process, SrCl2-based systems offer significant advantages for renewable energy integration.