In this work, we proposed a flexible broadband metamaterial perfect absorber (FBMPA) by exploiting a pasted conductive-graphene ink on a polyimide substrate. For the flat FBMPA, an absorption over 90% was found to cover a wide frequency range (from 7.88 to 18.01 GHz). The high-absorption feature was polarization-insensitive and regarded as stable with respect to the oblique incidence up to 30 degrees of electromagnetic wave. The high absorption was maintained well even when the absorber was wrapped. That is, the FBMPA was attached to cylindrical surfaces (with the varying radius from 4 to 50 cm). For both flat and curved states, the absorption mechanism was explained by the perfect impedance matching and the dielectric loss of the proposed absorber. Our work provides the groundwork for the commercialization of future meta-devices such as sensors, optical filters/switchers, photodetectors, and energy converters.

Nano/micro polystyrene (PS) beads have found many applications in different fields spanning from drug delivery, bio-diagnostics, and hybrid plasmonics to advanced photonics. The sizes of the PS beads are an important parameter, especially in plasmonic and photonic experiments. In this work, we demonstrate a quick and straightforward method to estimate the diameters of sub-microspheres (0.2 μm to 0.8 μm) using the transmission spectra of a close-packed monolayer of polystyrene beads on glass or quartz substrates. Experimental transmission spectra of the PS monolayers were verified against finite-difference time-domain (FDTD) simulation and showed good agreement. The effects of the substrates on the transmission spectra and, hence, the accuracy of the method were also studied by simulation, which showed that common transparent substrates only cause minor deviation of the PS bead sizes calculated by the proposed method.

Metamaterials, recognized as advanced artificial materials endowed with distinctive properties, have found diverse applications in everyday life, military endeavors, and scientific research. Starting from monolayer metamaterials, multilayer ones are increasingly researched, especially in the field of electromagnetic wave absorption. In this article, we propose a multilayer metamaterial-absorber (MA) structure comprising two resonant layers crafted with copper and FR-4 dielectric. The presented multilayer MA structure exhibited an absorption greater than 90% in a frequency range from 4.84 to 5.02 GHz, with two maximum absorption peaks at 4.89 and 4.97 GHz. The bandwidth of the multilayer MA surpassed that of the individual single-layer MAs, with extension fractions reaching 360% and 257%, respectively. Through the simulation and calculation, the field distribution and equivalent circuit model elucidated that both individual magnetic resonances and their interplay contribute significantly to the absorption behavior of the multilayer MA. The absorption of the proposed multilayer MA structure was also investigated for the oblique incidence in the transverse electric (TE) and transverse magnetic (TM) modes. In the TE mode, the absorption intensity of two maximum peaks was maintained at over 93% up to an incident angle of 40 degrees and dropped to below 80% at an incident angle of 60 degrees. In the TM mode, the absorption was more stable and not significantly affected by the incident angle, ranging from 0 to 60 degrees. An absorption greater than 97% was observed when the incident angle increased from 0 to 60 degrees in the TM mode. Additionally, the approach in our work was further demonstrated by adding more resonant layers, making 3- and 4-layer structures. The results indicated that the absorption bandwidths of the 3- and 4-layer structures increased by 16% and 33%, respectively, compared to the bilayer structure. Furthermore, we analyzed the thermal distribution within the MA to understand the dissipation of absorbed electromagnetic energy. This research offers valuable insight into the augmented MA through a multilayer structure, presenting the implications for microwave applications like electromagnetic shielding, as well as in the design of MAs for terahertz devices and technologies, including emission and thermal imaging. These findings contribute to the advancement of knowledge in enhancing the absorption capabilities across various frequency ranges, expanding the potential applications of metamaterials.

We demonstrate a dual-band, polarization-insensitive, ultrathin and flexible metamaterial absorber (MA), based on high-order magnetic resonance. By exploiting a flexible polyimide substrate, the thickness of MA came to be 1/148 of the working wavelength. The absorption performance of the proposed structure was investigated for both planar and bending models. In the case of the planar model, a single peak was achieved at a frequency of 4.3 GHz, with an absorption of 98%. Furthermore, additional high-order absorption peaks were obtained by the bending structure on a cylindrical surface, while the fundamental peak with a high absorption was maintained well. Our work might be useful for the realization and the development of future devices, such as emitters, detectors, sensors, and energy converters.

We present a numerical study of thermo-tunable broadband-negative-permeability metamaterial based on second-order hybridization operating at the THz regime.

In this paper, we present a flexible magnetic metamaterial structure for enhancing the efficiency of wireless power transfer (WPT) systems operating at 13.56 MHz. The metasurface between transmitter (Tx) and receiver (Rx) coils of the WPT system is constructed of a 3 × 5 metamaterial unit cell array with a total size of 150 × 300 mm². Most metamaterial structures integrated into WPT systems are in planar configurations with a rigid substrate, which limits practical applications. The proposed metasurface is fabricated on an FR-4 substrate with a thin thickness of 0.2 mm; therefore, it can be bent with radii greater than 80 mm. A defect cavity is formed in the non-homogeneous metasurface by controlling the resonant frequency of the unit cell with an external capacitor. Simulation and measurement results show that the efficiency of the WPT system is significantly enhanced with metasurfaces. The performance of the WPT system can also be optimized with suitable bend profiles of metasurfaces. This proposed flexible metasurface could be widely applied to WPT systems, especially asymmetric, bendable, or wearable WPT systems.