Lingpeng Ye

Mr. Lingpeng Ye

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 September 2020 in Materials
Verified
Journal Article
Open access
PDF file
LYLingpeng Ye
Lingpeng Ye
BWBaisheng Wang
Baisheng Wang
PSPujian Shao
Pujian Shao
During the restoration of ancient wood structures, the original material of the structures should be kept as much as possible, so a spliced method by using lap joints is commonly used to repair ancient wood structures. This study studies the mechanical behavior of a lap joint which was reinforced with fiber composite materials or steels. An experimental and numerical analysis were performed to study the strength, stiffness and failure modes of the lap joints. The test results showed that the strengthening effect of sticking carbon fiber-reinforced polymer (CFRP) sheets is better than that of sticking CFRP bars or steel bars due to the better bonding conditions; therefore, the lap joint reinforced with CFRP sheets was further analyzed using a numerical approach. The strength and stiffness were enhanced by increasing the reinforcement ratio of CFRP sheets. The use of a 0.34% reinforcement ratio made the bearing capacity of the lap joint reach that of the intact beam. The numerical model agreed well with the experiments in terms of stiffness. By analyzing the numerical analysis results, the structural behavior of the lap joint was revealed. A numerical model can be used to predict the stiffness and behavior of spliced beams with lap joints of different sizes.

10 December 2023 in Buildings
Verified
Journal Article
Open access
PDF file
JZJinsu Zou
Jinsu Zou
BWBaisheng Wang
Baisheng Wang
LYLingpeng Ye
Lingpeng Ye
Most of the existing masonry bridges have been in service for a significant duration, and as a result of construction limitations, these structures often exhibit intricate geometric defects. Furthermore, under prolonged loading conditions, the rheological behavior of rock can induce deformation in masonry bridges, leading to a continuously evolving stress state. Employing an idealized model for safety assessment frequently results in an overestimation of their load-bearing capacity. To accurately evaluate the load-bearing performance and remaining service life of masonry bridges, as well as to prevent safety incidents, this study employs a parametric approach to establish a two-phase numerical model of masonry bridges. In this model, cohesive elements are introduced to simulate the bonding relationship, while the distribution pattern of geometric initial defects is determined based on the theory of conditional random fields. Additionally, the rheological behavior of rock is incorporated through a custom-written Abaqus user subroutine. Building upon this foundation, the probability distribution of the load-bearing capacity of masonry bridges is reconstructed using the maximum entropy method with fractional moment constraints. The resulting outcomes are compared and validated against those obtained using the decomposition conditional correlation matrix. Finally, the effectiveness and applicability of the proposed method are demonstrated through numerical simulations and field measurements conducted on an actual bridge. The findings reveal that the method introduced in this paper adequately accounts for the stochastic nature of geometric initial defects, objectively reflects the operational performance of masonry bridges, and effectively simulates the complete failure process of such structures. Consequently, this method provides a solid basis for the safety assessment of masonry bridges.

28 March 2024 in Buildings
Verified
Journal Article
Open access
PDF file
Jiyang WangJiyang Wang
Jiyang Wang
DYDan Yu
Dan Yu
CZChen Zeng
Chen Zeng
XJXiaohua Ji
Xiaohua Ji
LYLingpeng Ye
Lingpeng Ye
SZSenlin Zhao
Senlin Zhao
To examine the flexural toughness characteristics of textile-reinforced lightweight aggregate concrete (TRLC), a four-point bending test was conducted to assess the impact of varying numbers of textile layers and the inclusion of hydroxypropyl methylcellulose on the ultimate load-bearing capacity and deformation capacity of TRLC thin plates. Six groups of specimens were prepared for the experiment, and the bending capacity of the thin plates in each group was evaluated. The flexural toughness index was utilized to quantify the bending performance of TRLC thin plates. The findings revealed that increasing the number of textile layers improved the initial cracking load, initial cracking deflection, ultimate load, ductility, and flexural toughness of the thin plates. For the specimens without HPMC, the initial cracking load was increased by up to 36.1%, the ultimate load by up to 40.9%, and the flexural toughness index by up to 292% as the number of textile layers was increased. For specimens doped with HPMC, the initial cracking load was increased by up to 61.7%, the ultimate load by up to 246.7%, and the flexural toughness index by up to 65%. The TRLC thin plate containing hydroxypropyl methylcellulose exhibited a reduced initial cracking load yet displayed a stronger matrix consistency and good flexural toughness. Moreover, the enhancement in the ultimate load of TRLC thin plates with hydroxypropyl methylcellulose was more pronounced with an increased number of textile layers, resulting in a significantly higher number of cracks compared to TRLC without hydroxypropyl methylcellulose and an 11.40-fold increase in the flexural toughness index.

29 October 2025 in Buildings
Verified
Journal Article
Open access
PDF file
Jinhai ZhaoJinhai Zhao
Jinhai Zhao
GZGang Zong
Gang Zong
SZShimin Zhang
Shimin Zhang
LYLingpeng Ye
Lingpeng Ye
Jie XiaoJie Xiao
Jie Xiao
XHXinzan Hu
Xinzan Hu
Steel structure specimens exhibit high strength and ductility and are often subjected to complex loading conditions and pre-existing cracks in critical engineering applications. In this study, peridynamics (PD) theory—known for its unique advantages in modeling structural damage and failure—is employed to establish specimens with bilateral cracks and double central cracks at varying longitudinal spacings. To address the complexity of elastic–plastic behavior, the D-M model is applied to transform the nonlinear problem into an equivalent linear elastic one. This approach is integrated with PD theory and the crack tip opening displacement (COD) concept of fracture mechanics to derive a novel linear fracture criterion, termed the PD-COD. Furthermore, numerical models based on PD and the PD-COD criterion are developed for central cross double-crack specimens, enabling analysis of crack propagation under loading. The results validate the effectiveness of the PD-COD damage criterion and elucidate the underlying mechanisms of crack propagation in centrally intersecting double-crack configurations. This work contributes to a deeper understanding of the damage evolution in defective steel structures under load and provides theoretical guidance for engineering design.