One of the most dangerous kinds of attacks affecting computers is a distributed denial of services (DDoS) attack. The main goal of this attack is to bring the targeted machine down and make their services unavailable to legal users. This can be accomplished mainly by directing many machines to send a very large number of packets toward the specified machine to consume its resources and stop it from working. We implemented a method using Java based on entropy and sequential probabilities ratio test (ESPRT) methods to identify malicious flows and their switch interfaces that aid them in passing through. Entropy (E) is the first technique, and the sequential probabilities ratio test (SPRT) is the second technique. The entropy method alone compares its results with a certain threshold in order to make a decision. The accuracy and F-scores for entropy results thus changed when the threshold values changed. Using both entropy and SPRT removed the uncertainty associated with the entropy threshold. The false positive rate was also reduced when combining both techniques. Entropy-based detection methods divide incoming traffic into groups of traffic that have the same size. The size of these groups is determined by a parameter called window size. The Defense Advanced Research Projects Agency (DARPA) 1998, DARPA2000, and Canadian Institute for Cybersecurity (CIC-DDoS2019) databases were used to evaluate the implementation of this method. The metric of a confusion matrix was used to compare the ESPRT results with the results of other methods. The accuracy and f-scores for the DARPA 1998 dataset were 0.995 and 0.997, respectively, for the ESPRT method when the window size was set at 50 and 75 packets. The detection rate of ESPRT for the same dataset was 0.995 when the window size was set to 10 packets. The average accuracy for the DARPA 2000 dataset for ESPRT was 0.905, and the detection rate was 0.929. Finally, ESPRT was scalable to a multiple domain topology application.
1 September 2024 in Journal of Physics Communications
Piezoresistive pressure sensors have transformed biomedical applications, enabling precise diagnostics and monitoring. This concise review explores the fundamental principles, key components, and fabrication techniques of piezoresistive pressure sensors, focusing on critical performance metrics such as sensitivity, accuracy, and response time. Biomedical design challenges, including biocompatibility and long-term stability, are examined, offering insights into solutions for optimal sensor integration. In diverse biomedical applications, piezoresistive pressure sensors play pivotal roles, from blood pressure monitoring to implantable medical devices. The paper emphasizes their versatility in enhancing patient care through continuous and accurate monitoring. Looking forward, the review discusses emerging trends and potential research directions, positioning piezoresistive pressure sensors as central contributors to the future of biomedical technology, promising improved patient outcomes and advanced healthcare delivery through precise and continuous monitoring.
Wireless power transfer technology features shorter power transmission distances in biomedical applications. This is a result of the small size of the implanted coils, biocompatible material conductivity, and the large distances between the receiving and transmitting coils. There have been numerous attempts to improve the power transfer efficiency across longer distances. Multiple coils, including 2-, 3-, 4-, and multi-layered coils, were previously considered. This study proposes a novel approach to achieve higher power transmission efficiency by integrating a single coil on the receiving side and three asymmetric coils on the transmitter side. As such, it delivers power to the sensor implanted within the coronary artery that monitors the blood pressure while introducing a uniquely shaped stent. The efficiency of power transmitted to the stent in its dual implanted forms, helical and zigzag helical, was examined as well, with the wireless power transmission system thereby analyzed at the 27 MHz Industrial Scientific Medical band operating frequency. For the four-coil technique, the power transmission efficiency at a distance of 25 mm between the receiver and transmitter sides by using biological human tissue as a medium between the transmission coils and the receiver stent can reach 56.42%, whereas other approaches show lower efficiencies: the three-coil method’s efficiency is 32.88%, the double-layer parallel method’s efficiency is 27.75%, the two-coil method’s efficiency is 24.76%, the triple-layer parallel method’s efficiency is 17.31%, the double-layer series method’s efficiency is 0.501%, and the triple-layer series method’s transmission efficiency is 0.092%. In addition, the suggested approach is demonstrated to be more efficient than prior designs with regard to the size of the implanted coils, which represent stents.
This paper put forward the design and modeling pertaining to a wireless pressure sensor that can monitor blood pressure within the coronary artery with the help of a capacitive pressure sensor. To adjust the resonance frequency (26.78–27.09 MHz) with regards to this sensor’s applied pressure (0–30 KPa), sensor’s dimension as well as human blood pressure (0–220 mmHg), a variable capacitor in the pressure sensor has been put forward. The shape of the capacitive pressure sensor was designed to look like an Ellipse and a circle, which were assessed for their performance with regards to capacitive sensitivity and diaphragm deflection. Also, the diaphragm thickness pertaining to the capacitive pressure sensor with Ellipse and circular shapes was altered ( $0.1~\mu \text{m}$ to $0.5~\mu \text{m}$ ) while the cross-section area was kept constant at 1 mm 2 . As per the results, an invasive sensor with circular and Ellipse capacitive pressure shape that had smaller size (1) mm 2 displayed high sensitivity. The sensitivity readings for Ellipse and circular shape capacitive pressure sensor were 7.73 ff mmHg −1 and 9.94 ff mmHg −1 , respectively. Diaphragm deflection was simulated based on the COMSOL Multiphysics software, while MATLAB was employed for simulation with regards to changes in resonance frequency, capacitance, and capacitive sensitivity.
17 October 2020 in Tehnicki vjesnik - Technical Gazette
This paper deals with designing a simple and efficient simultaneous inductive power and data transmission for transcutaneous Micro-system based on ASK modulation at 6,78 MHz industrial, scientific, and medical (ISM) band to avoid the...
1 August 2024 in Advances in Science and Technology Research Journal
The shift, towards cars (EVs) plays a role in the global effort to combat climate change by reducing dependence on fossil fuels. An important part of this shift involves creating user EV charging systems. This study looks into how a connected coil design in a wireless power transfer system can...