Wireless power transfer technology features shorter power transmission distances in biomedical applications. This is a result of the small size of the implanted coils, biocompatible material conductivity, and the large distances between the receiving and transmitting coils. There have been numerous attempts to improve the power transfer efficiency across longer distances. Multiple coils, including 2-, 3-, 4-, and multi-layered coils, were previously considered. This study proposes a novel approach to achieve higher power transmission efficiency by integrating a single coil on the receiving side and three asymmetric coils on the transmitter side. As such, it delivers power to the sensor implanted within the coronary artery that monitors the blood pressure while introducing a uniquely shaped stent. The efficiency of power transmitted to the stent in its dual implanted forms, helical and zigzag helical, was examined as well, with the wireless power transmission system thereby analyzed at the 27 MHz Industrial Scientific Medical band operating frequency. For the four-coil technique, the power transmission efficiency at a distance of 25 mm between the receiver and transmitter sides by using biological human tissue as a medium between the transmission coils and the receiver stent can reach 56.42%, whereas other approaches show lower efficiencies: the three-coil method’s efficiency is 32.88%, the double-layer parallel method’s efficiency is 27.75%, the two-coil method’s efficiency is 24.76%, the triple-layer parallel method’s efficiency is 17.31%, the double-layer series method’s efficiency is 0.501%, and the triple-layer series method’s transmission efficiency is 0.092%. In addition, the suggested approach is demonstrated to be more efficient than prior designs with regard to the size of the implanted coils, which represent stents.
1 February 2023 in International Journal of Electrical and Computer Engineering (IJECE)
The 5G system-based cognitive radio network is promised to meet the requirements of huge data applications with spectrum. However, the M-ary effect on the detection has not been thoroughly investigated. In this paper, an M-ary of quadrature amplitude modulation detection system is studied. Many rates are used in this study 4, 16, 64, and 256 constellation points. The detection system is applied to cooperative spectrum sensing to enhance the performance of detection for various rates of M-ary with low signal-to-noise ratio (SNR). Further, three kinds of signals based 5G system are sensed: filtered-orthogonal frequency division multiplexing (F-OFDM), filter bank multi-carrier (FBMC), and universal filtered multi-carrier (UFMC). The best detection performance is obtained when the M-ary=4 and number of SUs=50 user, whereas the worst detection performance is obtained when the M-ary=256 and number of SUs=10 user, as revealed in the simulation results. In addition, the detection performance for the F-OFDM signal is better than that of UFMC and FBMC signals for SNR <0 dB.
The shift, towards cars (EVs) plays a role in the global effort to combat climate change by reducing dependence on fossil fuels. An important part of this shift involves creating user EV charging systems. This study looks into how a connected coil design in a wireless power transfer system can...
The UFMC waveform is a type of physical layer, used by Cognitive Radio systems, to achieve reliable communication by using adaptive spectrum access. It is designed to provide interference-free communication without erasing the signals of the existing licensed users. The UFMC waveform is advantageous in Cognitive Radio networks because it can be very easily configured for different operating scenarios, providing both reliable and efficient communication. MIMO-UFMC-based transmissions, when used in combination with multiple-input multiple-output (MIMO) transmissions, have become widely accepted air interfaces that significantly improve spectral efficiency. This work presents a hybrid technique (HEDSLCT) as mathematical formulation of expressions that enable the analysis of ED performance based on the square-law combining (SLC) method in MIMO-UFMC systems, considering the future massive implementation of these systems in the fourth and fifth generation of mobile networks. The developed algorithms were used to conduct simulations for analyzing the performance of an ED process based on the SLC in MIMO-UFMC systems with varied numbers of transmit (Tx) and receive (Rx) communication branches. The results of these simulations enabled an evaluation of the ED performance. This paper presents an analysis of the effects of various factors, such as PU Tx power, false alarm probability, number of Tx and Rx MIMO branches, number of samples in ED process, and modulation techniques, on ED performance according to different signal-to-noise ratios. The obtained results of a comprehensive analysis showed that an appropriate selection of the evaluated factors could be used to improve the energy detection performance of multiple-input multiple-output ultra-wideband frequency-division multiplexing-based cognitive radio networks.