Omar AlShorman

Dr. Omar AlShorman

College of engineering and Al Shrouk Trading Company, Najran University, Najran, Kingdom of Saudi Arabia
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2021 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
PDF file
OAOmar AlShorman
Omar AlShorman
FAFahad Alkahatni
Fahad Alkahatni
MMMahmoud Masadeh
Mahmoud Masadeh
MIMuhammad Irfan
Muhammad Irfan
AGAdam Glowacz
Adam Glowacz
WGWitold Glowacz
Witold Glowacz
Nowadays, condition-based maintenance (CBM) and fault diagnosis (FD) of rotating machinery (RM) has a vital role in the modern industrial world. However, the remaining useful life (RUL) of machinery is crucial for continuous monitoring and timely maintenance. Moreover, reduced maintenance costs, enhanced safety, efficiency, reliability, and availability are the main important industrial issues to maintain valuable and high-cost machinery. Undoubtedly, induction motor (IM) is considered to be a pivotal component in industrial machines. Recently, acoustic emission (AE) becomes a very accurate and efficient method for fault, leaks and fatigue detection and monitoring techniques. Moreover, CM and FD based on the AE of IM have been growing over recent years. The proposed research study aims to review condition monitoring (CM) and fault diagnosis (FD) studies based on sound and AE for four types of faults: bearings, rotor, stator, and compound. The study also points out the advantages and limitations of using sound and AE analysis in CM and FD. Existing public datasets for AE based analysis for CM and FD of IM are also mentioned. Finally, challenges facing AE based CM and FD for RM, especially for IM, and possible future works are addressed in this study.

4 November 2020 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
OAOmar AlShorman
Omar AlShorman
MIMuhammad Irfan
Muhammad Irfan
NSNordin Saad
Nordin Saad
DZDong Zhen
Dong Zhen
NHNoman Haider
Noman Haider
AAAhmad M. Alshorman
Ahmad M. Alshorman
The fault detection and diagnosis (FDD) along with condition monitoring (CM) and of rotating machinery (RM) have critical importance for early diagnosis to prevent severe damage of infrastructure in industrial environments. Importantly, valuable industrial equipment needs continuous monitoring to enhance the safety, reliability, and availability and to decrease the cost of maintenance of modern industrial systems and applications. However, induction motor (IM) has been extensively used in several industrial processes because it is cheap, reliable, and robust. Rolling bearings are considered to be the main component of IM. Undoubtedly, any failure of this basic component can lead to a serious breakdown of IM and for whole industrial system. Thus, many current methods based on different techniques are employed as a fault prognosis and diagnosis of rolling elements bearing of IM. Moreover, these techniques include signal/image processing, intelligent diagnostics, data fusion, data mining, and expert systems for time and frequency as well as time-frequency domains. Artificial intelligence (AI) techniques have proven their significance in every field of digital technology. Industrial machines, automation, and processes are the net frontiers of AI adaptation. There are quite developed literatures that have been approaching the issues using signals and data processing techniques. However, the key contribution of this work is to present an extensive review of CM and FDD of the IM, especially for rolling elements bearings, based on artificial intelligent (AI) methods. This study highlights the advantages and performance limitations of each method. Finally, challenges and future trends are also highlighted.

1 October 2020 in Indonesian Journal of Electrical Engineering and Computer Science
Verified
Journal Article
Open access
PDF file
OAOmar AlShorman
Omar AlShorman
BAButhaynah AlShorman
Buthaynah AlShorman
MAMahmood Al-Khassaweneh
Mahmood Al-Khassaweneh
FAFahad Alkahtani
Fahad Alkahtani
The latest advances and trends in information technology and communication have a vital role in healthcare industries. Theses advancements led to the Internet of Medical Things (IoMT) which provides a continuous, remote and real-time monitoring of patients. The IoMT architectures still face many challenges related to the bandwidth, communication protocols, big data and data volume, flexibility, reliability, data management, data acquisition, data processing and analytics availability, cost effectiveness, data security and privacy, and energy efficiency. The goal of this paper is to find feasible solutions to enhance the healthcare living facilities using remote health monitoring (RHM) and IoMT. In addition, the enhancement of the prevention, prognosis, diagnosis and treatment abilities using IoMT and RHM is also discussed. A case study of monitoring the vital signs of diabetic patients using real-time data processing and IoMT is also presented.

9 September 2020 in Machines
Verified
Journal Article
Open access
PDF file
AAAhmad M. Alshorman
Ahmad M. Alshorman
OAOmar AlShorman
Omar AlShorman
MIMuhammad Irfan
Muhammad Irfan
AGAdam Glowacz
Adam Glowacz
FMFazal Muhammad
Fazal Muhammad
Wahyu CaesarendraWahyu Caesarendra
Wahyu Caesarendra
The motion-planning problem is well known in robotics; it aims to find a free-obstacle path from a starting point to a destination. To make use of actuation generosity and the fuzzy fast response behavior compared to other non-linear controllers, a fuzzy-based fault-tolerant control for an omnidirectional mobile robot with four Mecanum wheels is proposed. The objective is to provide the robot with an online scheme to control the robot motion while moving toward the final destination with avoiding obstacles in its environment and providing an adaptive solution for a combination of one or combination of the wheel’s faults. The faults happen when the wheel does not receive the control command signal from the controller; in this case, the robot can rotate freely due to the interaction with the ground. The principle of fuzzy-based control proposed by Sugeno is used to develop the motion controller. The motion controller consists of two main controllers: the Run-To-Goal, and the obstacle-avoidance controller. The outputs of these two controllers are superposed to get the net potential force on the robot. By its simplicity, the fuzzy controller can be suitable for online applications (online path planning in our case). To the best of our knowledge, this is the first fuzzy-based fault-tolerant controller for an omnidirectional robot. The proposed controller is tested by a set of simulation scenarios to check the proposed fuzzy tolerant control. Kuka OmniRob is used as an example of the omnidirectional robot in these simulation runs. Matlab is used to build the fuzzy-based fault-tolerant control, and the 3D simulation is developed on the CoppeliaSim software. We examine five distinct scenarios, each one with a different fault state. In all scenarios, the proposed algorithm could control the robot to reach its final destination with the absence and presence of an obstacle in the workspace, despite actuator faults, without crossing the workspace boundaries.

5 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
MIMuhammad Irfan
Muhammad Irfan
FZFareeda Zaheer
Fareeda Zaheer
HHHumaira Hussain
Humaira Hussain
Muhammad NazMuhammad Naz
Muhammad Naz
SSShazia Shukrullah
Shazia Shukrullah
DGDobrochna Ginter-Kramarczyk
Dobrochna Ginter-Kramarczyk
This study is focused on the kinetics and adsorption isotherms of amine-functionalized magnesium ferrite (MgFe2O4) for treating the heavy metals in wastewater. A sol-gel route was adopted to produce MgFe2O4 nanoparticles. The surfaces of the MgFe2O4 nanoparticles were functionalized using primary amine (ethanolamine). The surface morphology, phase formation, and functionality of the MgFe2O4 nano-adsorbents were studied using the SEM, UV-visible, FTIR, and TGA techniques. The characterized nanoparticles were tested on their ability to adsorb the Pb2+, Cu2+, and Zn2+ ions from the wastewater. The kinetic parameters and adsorption isotherms for the adsorption of the metal ions by the amine-functionalized MgFe2O4 were obtained using the pseudo-first-order, pseudo-second-order, Langmuir, and Freundlich models. The pseudo-second order and Langmuir models best described the adsorption kinetics and isotherms, implying strong chemisorption via the formation of coordinative bonds between the amine groups and metal ions. The Langmuir equation revealed the highest adsorption capacity of 0.7 mmol/g for the amine-functionalized MgFe2O4 nano-adsorbents. The adsorption capacity of the nanoadsorbent also changed with the calcination temperature. The MgFe2O4 sample, calcined at 500 °C, removed the most of the Pb2+ (73%), Cu2+ (59%), and Zn2+ (62%) ions from the water.

3 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
MIMuhammad Irfan
Muhammad Irfan
RNRab Nawaz
Rab Nawaz
JKJaved Akbar Khan
Javed Akbar Khan
HUHabib Ullah
Habib Ullah
THTahir Haneef
Tahir Haneef
AGAbdulnoor Ghanim
Abdulnoor Ghanim
The release of phenolic-contaminated treated palm oil mill effluent (TPOME) poses a severe threat to human and environmental health. In this work, manganese-modified black TiO2 (Mn-B-TiO2) was produced for the photodegradation of high concentrations of total phenolic compounds from TPOME. A modified glycerol-assisted technique was used to synthesize visible-light-sensitive black TiO2 nanoparticles (NPs), which were then calcined at 300 °C for 60 min for conversion to anatase crystalline phase. The black TiO2 was further modified with manganese by utilizing a wet impregnation technique. Visible light absorption, charge carrier separation, and electron–hole pair recombination suppression were all improved when the band structure of TiO2 was tuned by producing Ti3+ defect states. As a result of the enhanced optical and electrical characteristics of black TiO2 NPs, phenolic compounds were removed from TPOME at a rate of 48.17%, which is 2.6 times higher than P25 (18%). When Mn was added to black TiO2 NPs, the Ti ion in the TiO2 lattice was replaced by Mn, causing a large redshift of the optical absorption edges and enhanced photodegradation of phenolic compounds from TPOME. The photodegradation efficiency of phenolic compounds by Mn-B-TiO2 improved to 60.12% from 48.17% at 0.3 wt% Mn doping concentration. The removal efficiency of phenolic compounds from TPOME diminished when Mn doping exceeded the optimum threshold (0.3 wt%). According to the findings, Mn-modified black TiO2 NPs are the most effective, as they combine the advantages of both black TiO2 and Mn doping.