This article develops a new platoon control strategy for heterogeneous connected vehicles (CVs) subject to time delays and external disturbances. Specifically, based on the third-order vehicle model, a novel platoon controller is developed by embedding the variable time headway (VTH) spacing policy and the nonlinear motion coupling interactions between CVs. Simultaneously, an integral sliding mode (ISM) controller is developed to resist the disturbances. Then, the condition of asymptotic stability for the CV platoon and the upper bound of communication delay are deduced by using the Lyapunov theorem. Also, the string stability is proved by using the infinity-norm method. Finally, extensive simulations and co-simulations are provided to show the validity of the developed controller. Moreover, experiments with intelligent micro vehicles are conducted further to validate the practical feasibility of the developed controller.

A confined-doped fiber was fabricated by a modified chemical vapor deposition (MCVD) process based on refractive index matching technology. With theory and experiments, we compared the confined-doped fiber and normal-doped fiber. We found that the confined-doped fiber with a core of 35 μm and 0.07 numerical aperture could achieve single-mode output and improve the beam quality from 2.8 to 1.5 in the fiber laser. Meanwhile, it still possesses high laser efficiency and has good stability of beam quality with the increase in pump power. It suggests that the confined-doped fiber with a MCVD process may be the key material for a high-power fiber laser with excellent beam quality.

Aiming at the issue of active obstacle avoidance control for intelligent vehicles under emergency, an active safety collaborative control system integrated with adaptive cruise control (ACC), rear steering control (RSC), and rollover braking control (RBC) is developed. The proposed novel control architecture consists of a supervisor, an upper controller, and a lower controller. The supervisor decides which control mode to be used based on multi-sensors information of the driving vehicle. Active rear wheel steering based on lateral acceleration feedback and active braking control strategies based on fuzzy PID are added into the control model to enhance driving stability. To make the vehicle motion control model suitable for highway path tracking with obstacle avoidance under emergency, a priority is given to the RBC controller even though the vehicle speed is lower than the expected speed when the rollover index exceeds the safety threshold. A nonlinear vehicle simulation model is established to validate the proposed control scheme based on Carsim. Finally, a Carsim-Simulink co-simulation model is constructed, and simulation results show that the proposed integrated control strategy based on active safety collaborative control has good performance in both path tracking and driving stability, and has better stability of rollover under emergency.

This paper develops a novel integrated collision avoidance strategy for autonomous vehicles in an emergency based on steering and braking. Specifically, the framework of the collision avoidance strategy is composed of two parts: an up-level decision-making layer and a low-level controller layer. The purpose of the up-level is to select the appropriate control strategy based on the vehicle information, and the low-level is to drive the vehicle according to the instructions generated by the up-level. More concretely, a novel control strategy is proposed by integrating four-wheel steering, active rear steering, and differential braking with guaranteed path-tracking accuracy and driving stability by adaptive model predictive control (AMPC). Finally, extensive co-simulations in MATLAB/Simulink and CarSim are conducted to verify the effectiveness of the proposed collision avoidance strategy in terms of tracking error, yaw rate, and roll angle.

Collision avoidance has been widely researched in the field of intelligent vehicles (IV). However, the majority of research neglects the individual driver differences. This paper introduced a novel personalized collision avoidance control (PCAC) strategy for IV based on driving characteristics (DC), which can better satisfy various scenarios and improve drivers’ acceptance. First, the driver’s DC is initially classified into four types using K-means clustering, followed by the application of the analytic hierarchy process (AHP) method to construct the DC identification model for the PCAC design. Then, a novel PCAC is integrated with a preview-follower control (PFC) module, an active rear steering (ARS) module, and a forward collision control (FCC) module to ensure individual requirements and driving stability. Moreover, simulations verified the validity of the developed PCAC in terms of path tracking, lateral acceleration, and yaw rate. The research results indicate that DC can be identified effectively through APH, and PCAC based on DC can facilitate the development of intelligent driving vehicles with superior human acceptance performance.

In view of the model uncertainty of the initial flight stage and the existence of external interference, a sliding mode control system based on feedback-linearization is proposed to solve the problem of attitude control in the initial flight stage of Guided Rocket. Firstly, the motion quaternion of Guided Rocket is established. Secondly, the feedback-linearization method is used to decouple the nonlinear system, and a nonlinear robust controller is designed by combining the idea of bounded disturbance with sliding mode control. Then, the disturbance boundary function and controller parameters are designed to realize the attitude stabilization control of the initial stage of air defense rocket. Finally, the stability of the system is proved through lyapunov theory. The result indicates that the control system based on feedback linearization method and sliding mode technique could ensure attitude stabilization of Guided Rocket and robust when great change of aerodynamic parameters and external interference exists.