Multiplication and rearrangement of dislocations in face-centered cubic (FCC) metals during tensile deformation are affected by grain size, stacking fault energy (SFE), and solute elements. X-ray diffraction (XRD) line-profile analysis can evaluate the dislocation density () and dislocation arrangement (M) from the strength of the interaction between dislocations. However, the relationship between M and has not been thoroughly addressed. In this study, multiplication and rearrangement of dislocations in FCC metals during tensile deformation was evaluated by XRD line-profile analysis. Furthermore, the effects of grain size, SFE, and solute elements on the extent of dislocation rearrangement were evaluated with varying M values during tensile deformation. M decreased as the dislocation density increased. By contrast, grain size and SFE did not exhibit a significant influence on the obtained M values. The influence of solute species and concentration of solute elements on M changes were also determined. In addition, the relationship between dislocation substructures and M for tensile deformed metals were also explained. Dislocations were loosely distributed at M > 1, and cell walls gradually formed by gathering dislocations at M < 1. While cell walls became thicker with decreasing M in metals with low stacking fault energy, thin cell walls with high dislocation density formed for an M value of 0.3 in metals with high stacking fault energy.
This article reviews investigations on the formation of inhomogeneous ferrous (FeII) and ferric (FeIII) oxides in aqueous solution. These globally abundant materials are important in extensive fields of research including the corrosion of steels, mineralogy, environmental remediation, and biochemistry. Iron oxides are polycations consisting of FeII and FeIII ions bridged by hydroxyl groups and oxyanions. Solution conditions such as pH, temperature, the presence of foreign ions, and the presence of oxygen markedly influence the composition and structure of iron oxides and their transformation into various forms. Redox reactions of iron oxides are of great importance in controlling the extent of conversion between FeII and FeIII forms and the resulting composition of isolated species. Electrochemical potential versus pH (E–pH) diagrams are particularly useful in considering the details of iron oxide speciation as a function of solution conditions. Analytical techniques such as Mössbauer spectroscopy, X-ray diffraction, and electron microscopy are used to characterize the structure and morphology of iron-oxide samples. The involvement of mixed-valent (FeII/FeIII) species known as green rusts (GRs) in the formation of common iron oxides is described in terms of the oxidation level, pH, and foreign ion content of solutions. The terrestrial origin of iron oxides and their possible role in the abiogenesis of organisms also is described. Despite their inhomogeneity, the varied forms of iron oxides are important components of many natural and industrial processes.
Microscale changes in the microstructure of and stress distribution in a polycrystalline duplex stainless steel comprising ferrite and austenite caused by plastic tensile deformation are characterized to understand the microscopic processes of the crystal plasticity of dual-phase steel. Because the ferrite of the body-centered-cubic structure and the austenite of the face-centered-cubic structure exhibit different mechanical properties, texture changes in the ferrite and austenite caused by uniaxial tensile deformation are investigated based on the electron backscatter diffraction pattern. Residual stresses formed by tensile deformation are characterized using a two-dimensional method based on X-ray diffraction. The results show that the steel exhibits a banded microstructure of ferritic coarse grains and austenitic fine grains, and that the texture is changed by tensile deformation. The grains in the steel are rotated by tensile deformation depending on their orientation with respect to the tensile axis. Residual stress measurements demonstrate that compressive stresses remain in the elastically hard ferrite after tensile deformation, whereas tensile stresses remain in the austenitic phase. The formation of the residual stresses are discussed based on the characteristic microscale plasticity of ferrite and austenite.