Gia-Thinh Bui

Prof. Dr. Gia-Thinh Bui

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 August 2020 in Energies
Verified
Journal Article
Open access
PDF file
DPDa-Chen Pang
Da-Chen Pang
ZSZhen-Jia Shi
Zhen-Jia Shi
PXPei-Xuan Xie
Pei-Xuan Xie
HHHua-Chih Huang
Hua-Chih Huang
GBGia-Thinh Bui
Gia-Thinh Bui
This paper presents the world’s smallest inset permanent magnet synchronous motor (PMSM) with a soft magnetic composite (SMC) core, providing ease of manufacturing for micromachine applications without silicon steel laminations. The inset motor can offer an additional reluctance torque and higher torque density with a lower usage amount of permanent magnet. A 15 mm diameter inset motor was developed with the thickness of a tile-type permanent magnet which is limited to 1 mm by the manufacturer. The motor was designed with high torque density and low torque ripple by varying the interpole iron width for the rotor. Two inset motors were made using both SMC and silicon steel materials for comparison. The performance of the SMC motor was inferior to the silicon steel motor, but it still meets the specifications of the commercial market. If the thickness of the tile-type permanent magnet is further reduced, the micro inset motor with a SMC core can be easily mass-manufactured using powder sintering.

29 March 2024 in EUREKA: Physics and Engineering
Verified
Journal Article
Open access
PDF file
GBGia-Thinh Bui
Gia-Thinh Bui
TDThe Vinh Do
The Vinh Do
NMNguyen Quoc Manh
Nguyen Quoc Manh
MTMinh Hue Pham Thi
Minh Hue Pham Thi
VHVu Minh Hung
Vu Minh Hung
In manufacturing practice, manufacturers always strive to achieve both quality and productivity targets simultaneously. In the first part, this study examines the relationship between input factors, including cutting speed, depth of cut, and feed rate, and the output response, which is surface roughness, when milling hardened SKD11 alloy steel under minimum coolant lubrication conditions using SiO2 nanofluid. The input parameters are divided into four levels to determine their influence on surface roughness and to find the optimal conditions for achieving the minimum surface roughness. The experimental design was conducted using an L16 array. A second-order regression model was developed to describe the relationship between the input variables and the output response. In the second part, multi-objective optimization was performed to simultaneously achieve the minimum surface roughness and the maximum material removal rate (MRR). The Response Surface Methodology (RSM) was employed in this study. The results indicated that to achieve the minimum surface roughness, machining should be performed at a cutting speed of 100 m/min, a cutting depth of 0.2 mm, and a feed rate of 0.01 mm/tooth. With these settings, the predicted surface roughness could reach 0.0451 µm. On the other hand, for the multi-objective optimization, to achieve the minimum surface roughness and the maximum MRR simultaneously, machining should be carried out at a cutting speed of 100 m/min, a cutting depth of 0.36 mm, and a feed rate of 0.0168 mm/tooth. With this cutting condition, the predicted surface roughness could reach 0.1069 µm, and the predicted MRR could reach 775.06 mm3/min

10 July 2021 in Energies
Verified
Journal Article
Open access
PDF file
DPDa-Chen Pang
Da-Chen Pang
ZSZhen-Jia Shi
Zhen-Jia Shi
YCYoung-Ho Chang
Young-Ho Chang
HHHua-Chih Huang
Hua-Chih Huang
GBGia-Thinh Bui
Gia-Thinh Bui
This study describes the development of the world’s smallest interior permanent magnet synchronous motor (IPMSM) to increase the torque density of micromotors. The research evaluates the feasibility of the miniaturization of IPMSM since recent studies in this area focus on medium to large size compressor and traction motor applications. The standard-type and spoke-type IPMSM were selected for ease of micro machining. In order to surpass the performance of an inset motor of the same size used in previous research, the interior motors were designed with a different slot pole number, permanent magnet shape and rotor structure. Two types of interior motors were manufactured and tested to compare their performance. It was shown that the spoke-type interior motor had a better output torque, while the standard-type interior motor had a lower torque ripple, and both motors matched the specifications of commercially available motors. To achieve a higher torque density, the IPMSM designs increased the slot pole number from 6 slots 4 poles to 9 slots 6 poles. The torque density of the spoke-type motor was increased by 48% compared to the inset motor. The disadvantage is that the new design has a greater number of parts and smaller size, resulting in difficulties in manufacturing and assembly.

1 December 2019
Verified
Book Chapter
Closed access
PDF file
GBGia-Thinh Bui
Gia-Thinh Bui
NNNhu-Tung Nguyen
Nhu-Tung Nguyen
JLJr-Lung Lin
Jr-Lung Lin

31 March 2024 in International Journal of Transport Development and Integration
Verified
Journal Article
Open access
VVVan Quang Vu
Van Quang Vu
GBGia-Thinh Bui
Gia-Thinh Bui
HDHuu Vinh Dang
Huu Vinh Dang
ADAnh Tuan Dinh
Anh Tuan Dinh