This paper presents the results of modeling, control system design and simulation verification of a hybrid-electric drive topology suitable for power flow control within unmanned aerial vehicles (UAVs). The hybrid power system is based on the internal combustion engine (ICE) driving a brushless DC (BLDC) generator supplying the common DC bus used for power distribution within the aircraft. The overall control system features proportional-integral-derivative (PID) feedback control of the ICE rotational speed using a Luenberger estimator for engine-generator set rotational speed estimation. The BLDC generator active rectifier voltage and current are controlled by proportional-integral (PI) feedback controllers, augmented by estimator-based feed-forward load compensators. The overall control system design has been based on damping optimum criterion, which yields straightforward analytical expressions for controller and estimator parameters. The robustness to key process parameters variations is investigated by means of root-locus methodology, and the effectiveness of the proposed hybrid power unit control system is verified by means of comprehensive computer simulations.

The paper presents a hypothetical conversion of a conventional cable skidder powertrain to its hybrid version. Simulations of skidder operation were made for two existing forest paths, based on the technical characteristics of the engine, transmission system and the characteristics of the winch. Fuel and time consumption were calculated per working cycle considering the operating conditions (slope, load mass). The model was then converted to a hybrid version by adding a battery energy storage system in parallel with the electrical power generator and by employing an energy management control strategy. The dimensions of the battery and the power generator were chosen based on the characteristics of the existing winch with the aim of completely taking over its operation. The management strategy was selected using the specific fuel consumption map. All simulations were repeated for the hybrid drive under the same operating conditions. The results show that fuel savings of around 13% can be achieved with the selected hybrid drive and steering strategy.

Over the last decade, off-road vehicles have been increasingly hybridized through powertrain electrification in terms of additional electrical machine-based propulsion and battery energy storage, with the goal of achieving significant gains in fuel economy and reductions in greenhouse gases emissions. Since hybrid powertrains consist of two or more different energy sources and may be arranged in many different configurations, there are many open questions in their design and powertrain energy management control, which may have influence on the hybridized powertrain purchase cost and efficiency. This paper presents simple backward optimization models of conventional and hybrid cable skidder powertrains. These models are then used in the optimization of control variables over one forest path in order to find the minimum possible fuel consumption. The optimization results show that 15% fuel efficiency improvement in winching and skid trail driving can be achieved with the selected hybrid powertrain. With that improvement, main hybrid drive components can be paid off in 13 years.

This paper investigates potential uses of a novel direct driven electro-hydraulic systems for articulated forestry tractors (skidders), due to these systems having notably higher energy efficiencies compared to classical electro-hydraulic systems that are currently being used in skidders for steering, lifting the front and the rear plate, as well as for operating the double-drum winch. A detailed analysis of the skidder rear plate mechanism is carried out, and static force profiles of hydraulic cylinders are obtained for the rear plate based on mechanism dynamics and measurement data from the literature. Thus, obtained results have been used to emulate the real-life force profiles in laboratory experiments featuring both the classical and the proposed direct driven hydraulic systems for the purpose of comparative analysis of their energy and fuel efficiency. These results are subsequently used to estimate the skidder fuel consumption and possible fuel savings over the entire vehicle life span for the realistic vehicle utilisation scenario. The main result is that fuel consumption can be reduced up to five times in the case of direct driven hydraulic system, thus effectively resulting in return of investment period of about four years in the case of skidder being retrofitted with direct driven hydraulic system.