Muhammad Aleem

Mr. Muhammad Aleem

Bahauddin Zakariya University, Pakistan
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 June 2022 in Smart Agricultural Technology
Verified
Journal Article
Open access
Md Shamim AhamedMd Shamim Ahamed
Md Shamim Ahamed
MSMuhammad Sultan
Muhammad Sultan
RSRedmond R. Shamshiri
Redmond R. Shamshiri
MRMostafizar Rahman
Mostafizar Rahman
Muhammad AleemMuhammad Aleem
Muhammad Aleem
SBSiva K. Balasundram
Siva K. Balasundram

2 March 2022 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
TWTanzeela Z Wasti
Tanzeela Z Wasti
Muhammad SultanMuhammad Sultan
Muhammad Sultan
Muhammad AleemMuhammad Aleem
Muhammad Aleem
USUzair Sajjad
Uzair Sajjad
Muhammad FarhanMuhammad Farhan
Muhammad Farhan
SNShazia Noor
Shazia Noor
Thermally driven adsorption-based atmospheric water harvesting (AWH) is becoming an emerging technology to provide potable water. In this regard, various adsorbent materials including solid (MOFs, silica-gels, and zeolites), liquid (CaCl2 and LiCl), and composite adsorbents are explored in the literature. This study reviews recent advancements in adsorbent materials based on their water production capacity at different conditions that is air temperature and relative humidity (RH). The MOF of type MIL-101(Cr) shows water production capacity of 3.10 L/m2/day at RH ranging from 10% to 40%. Similarly, Zr-MOF-808 possesses water production capacity of 8.60 L/m2/day at RH more than 50%. Among the studied silica-gels, mesoporous silica-gel shows highest water production capacity that is 1.30 L/m2/day at RH ranging from 10% to 40%. The zeolite yielded water production capacity of 0.94 L/m2/day at RH ranging from 10% to 40%. On the other hand, liquid adsorbents like CaCl2 + cloth, K-LiCl showed water production capacity of 3.02 L/m2/day, and 2.9 g/g/day, respectively at RH of about 70%. Composite adsorbent modified with binary salts and functionalized carbon nanotubes resulted water production capacity of 5.60 g/g at RH of about 35%. The study will be useful to identify the energy-efficient adsorbent for the development of sustainable AWH device.

28 September 2022 in Frontiers in Energy Research
Verified
Journal Article
Open access
RARiaz Ahmad
Riaz Ahmad
HIHafiza Nabila Ilyas
Hafiza Nabila Ilyas
BLBin Li
Bin Li
MSMuhammad Sultan
Muhammad Sultan
Muhammad AmjadMuhammad Amjad
Muhammad Amjad
Fahid RiazFahid Riaz
Fahid Riaz
The utilization of biomass for cooking and heating is old, occurring from the early stages of human evolution because of its wide and easy availability. In Asia, a majority of the population is dependent on solid biomass for cooking and heating applications. Biomass cookstove produces emissions like carbon monoxide (CO), and particulate matter with aerodynamic diameter ≤2.5 μm (PM 2.5 ) which are dependent on the classifications and characteristics of fuel used in stoves. These emissions trigger many health risks because of the utilization of traditional cookstoves (TCS) which have less thermal efficiency. The literature contains a considerable amount of information on biomass cookstoves; however, it is dispersed particularly in Asian countries. In this principle, this paper gives an overview of available literature on biomass cookstoves for cooking and heating in Asian countries which are involving Bangladesh, China, India, Mongolia, Nepal, Pakistan, Sri Lanka, and Laos. This paper covers a detailed discussion on various aspects of biomass cookstoves: history, classification, fuel characteristics, health risks, design criteria, the scenario in selected Asian countries, thermal efficiency and emission comparison, and barriers to dissemination of improved biomass cookstoves (ICS). Learning from the review and comparison made conclude that the ICS has better thermal efficiency, and lesser emissions, as well as health risks but, have some potential barriers to dissemination.

22 October 2020 in Energies
Verified
Journal Article
Open access
PDF file
Muhammad AleemMuhammad Aleem
Muhammad Aleem
GHGhulam Hussain
Ghulam Hussain
Muhammad SultanMuhammad Sultan
Muhammad Sultan
Takahiko MiyazakiTakahiko Miyazaki
Takahiko Miyazaki
Muhammad Hamid Hamid MahmoodMuhammad Hamid Hamid Mahmood
Muhammad Hamid Hamid Mahmood
ZKZahid Mahmood Khan
Zahid Mahmood Khan
In this study, experimental apparatus of desiccant dehumidification was developed at lab-scale, using silica gel as a desiccant material. Experimental data were obtained at various ambient air conditions, while focusing the climatic conditions of Multan (Pakistan). A steady-state analysis approach for the desiccant dehumidification process was used, and thereby the slope of desiccant dehumidification line on psychrometric chart (ϕ*) was determined. It has been found that ϕ* = 0.22 in case of silica gel which is lower than the hydrophilic polymeric sorbent, i.e., ϕ* = 0.31. The study proposed two kinds of systems, i.e., (i) standalone desiccant air-conditioning (DAC) and (ii) Maisotsenko-cycle-assisted desiccant air-conditioning (M-DAC) systems. In addition, two kinds of desiccant material (i.e., silica gel and hydrophilic polymeric sorbent) were investigated from the thermodynamic point of view for both system types, using the experimental data and associated results. The study aimed to determine the optimum air-conditioning (AC) system type, as well as adsorbent material for building AC application. In this regard, perspectives of dehumidification capacity, cooling capacity, and thermal coefficient of performance (COP) are taken into consideration. According to the results, hydrophilic polymeric sorbent gave a higher performance, as compared to silica gel. In case of both systems, the performance was improved with the addition of Maisotsenko cycle evaporative cooling unit. The maximum thermal COP was achieved by using a polymer-based M-DAC system, i.e., 0.47 at 70 °C regeneration temperature.

27 January 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
GHGhulam Hussain
Ghulam Hussain
Muhammad AleemMuhammad Aleem
Muhammad Aleem
Muhammad SultanMuhammad Sultan
Muhammad Sultan
Uzair SajjadUzair Sajjad
Uzair Sajjad
SYSobhy Yakout
Sobhy Yakout
MQM Qammar
M Qammar
The study aims to investigate Maisotsenko cycle evaporative cooling assisted solid desiccant air-conditioning (M-DAC) system for agricultural storage application. Conventional air-conditioning (AC) systems used for this application are refrigeration-based which are expensive as they consume excessive amount of primary-energy. In this regard, the study developed a lab-scale solid silica gel-based desiccant AC (DAC) system. Thermodynamic performance of the developed system was investigated using various adsorption/dehumidification and desorption/regeneration cycles. The system possesses maximum adsorption potential i.e., 4.88 g/kg-DA at higher regeneration temperature of 72.6 °C and long cycle time i.e., 60 min:60 min. Moreover, the system’s energy consumption performance was investigated from viewpoints of maximum latent, sensible, and total heat as well as latent heat ratio (LHR), which were found to be 0.64 kW, 1.16 kW, and 1.80 kW, respectively with maximum LHR of 0.49. Additionally, the study compared standalone DAC (S-DAC), and M-DAC system thermodynamically to investigate the feasibility of these systems from the viewpoints of temperature and relative humidity ranges, cooling potential (Qp), and coefficient of performance (COP). The S-DAC system showed temperature and relative humidity ranging from 39 °C to 48 °C, and 35% to 66%, respectively, with Qp and COP of 17.55 kJ/kg, and 0.37, respectively. Conversely, the M-DAC system showed temperature and relative humidity ranging from 17 °C to 25 °C, and 76% to 98%, respectively, with Qp and COP of 41.80 kJ/kg, and 0.87, respectively. Additionally, the study investigated respiratory heat generation rate (Qres), and heat transfer rate (Qrate) by agricultural products at different temperature gradient (∆T) and air velocity. The Qres and Qrate by the products were increased with ∆T and air velocity, respectively, thereby generating heat loads in the storage house. Therefore, the study suggests that the M-DAC system could be a potential AC option for agricultural storage application.

15 April 2022 in Agriculture
Verified
Journal Article
Open access
PDF file
MAMarjan Aziz
Marjan Aziz
MKMadeeha Khan
Madeeha Khan
NANaveeda Anjum
Naveeda Anjum
Muhammad SultanMuhammad Sultan
Muhammad Sultan
Redmond R. ShamshiriRedmond R. Shamshiri
Redmond R. Shamshiri
Muhammad AleemMuhammad Aleem
Muhammad Aleem
The present study aimed at investigating scientific irrigation scheduling (SIS) for the sustainable production of olive groves. The SIS allows farmers to schedule water rotation in their fields to abate crop water stress and maximize yields, which could be achieved through the precise monitoring of soil moisture. For this purpose, the study used three kinds of soil moisture sensors, including tensiometer sensors, irrometer sensors, and gypsum blocks for precise measurement of the soil moisture. These soil moisture sensors were calibrated by performing experiments in the field and laboratory at Barani Agricultural Research Institute, Chakwal in 2018 and 2019. The calibration curves were obtained by performing gravimetric analysis at 0.3 and 0.6 m depths, thereby equations were developed using regression analysis. The coefficient of determination (R2) at 0.3 and 0.6 m depth for tensiometer, irrometer, and gypsum blocks was found to be equal to 0.98, 0.98; 0.75, 0.89; and 0.82, and 0.95, respectively. After that, a drip irrigation system was installed with the calibrated soil moisture sensors at 0.3 and 0.6 m depth to schedule irrigation for production of olive groves as compared to conventional farmer practice, thereby soil moisture profiles of these sensors were obtained to investigate the SIS. The results showed that the irrometer sensor performed as expected and contributed to the irrigation water savings between 17% and 25% in 2018 and 2019, respectively, by reducing the number of irrigations as compared toother soil moisture sensors and farmer practices. Additionally, olive yield efficiencies of 8% and 9%were observed by the tensiometer in 2018 and 2019, respectively. The outcome of the study suggests that an effective method in providing sustainable production of olive groves and enhancing yield efficiency.