Muhammad Syahril Mubarok

Dr. Muhammad Syahril Mubarok

Engineering, Universitas Airlangga, Surabaya, Jawa Timur, Indonesia
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
Muhammad Syahril MubarokMuhammad Syahril Mubarok
Muhammad Syahril Mubarok
Tian-Hua LiuTian-Hua Liu
Tian-Hua Liu
This paper proposes the implementation of predictive controllers for matrix-converter based IPMSM position control systems. A model-based predictive position controller and a model-free predictive current controller for IPMSMs are investigated here. The proposed predictive controllers can improve the dynamic responses, including transient, load disturbance, and tracking responses. In addition, the proposed model-free predictive current controller does not require any parameters such as inductance, resistance, or back EMF of the IPMSM, and its performance does not deteriorate because of variations in the virtual DC-link voltage. Only the stator current difference is used to predict the future sampling current. A detailed stability analysis of the current-loop control and position-loop control of the IPMSM position control system is discussed. Several experimental results are included to validate the theoretical analysis. Experimental results show the proposed predictive controllers have better performance than PI controllers. A 32-bit digital signal processor, a TMS-320LF-2407A, is used to execute the predictive controllers. The proposed control system is easily applied in industry due to its systematic design procedure.

18 April 2022 in IEEE Access
Verified
Journal Article
Open access
Muhammad Syahril MubarokMuhammad Syahril Mubarok
Muhammad Syahril Mubarok
Tian-Hua LiuTian-Hua Liu
Tian-Hua Liu
This paper proposes an adjustable wide-range speed-control method for sensorless IPMSM drive systems from standstill, low-speeds, middle-speeds, and high-speeds in the flux-weakening region. A sensorless method and an online parameter estimation method based on the measurement of current-slope under SVPWM with an extension compensation are proposed. The estimated rotor position, rotor speed, d-q axis inductances, magnetic flux, and torque of the IPMSM are precisely computed by using a current-slope measurement, and then a closed-loop speed control sensorless IPMSM drive system is implemented without requiring any external high-frequency signal injection or a complicated observer. In addition, to achieve a high-performance sensorless IPMSM drive system, the estimated parameters are used for real-time maximum torque per ampere control and flux-weakening control. Finally, the proposed sensorless IPMSM drive system provides a wide operation range from 1 r/min to 3000 r/min with excellent performance in constant-torque regions and flux-weakening regions. A digital signal processor, made by Texas Instrument, type TMS 320F2802, is employed to realize the control algorithm and estimation algorithm. Experimental results show the proposed sensorless IPMSM drive system achieves satisfactory responses, including $\pm \,{\mathrm {2.5}}^{\circ }$ of electrical position estimation errors, good dynamic responses, and good tracking responses.

10 January 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Muhammad Syahril MubarokMuhammad Syahril Mubarok
Muhammad Syahril Mubarok
Tian-Hua LiuTian-Hua Liu
Tian-Hua Liu
SDSeyed Alireza Davari
Seyed Alireza Davari
Jose RodriguezJose Rodriguez
Jose Rodriguez
A constrained predictive speed controller with an input current limit and a constrained predictive current controller (CPCC) with an input voltage limit are proposed for high-performance sensorless interior permanent magnet synchronous motor (IPMSM) drive systems. Recent predictive controllers for sensorless IPMSM drives tend to focus on unconstrained predictive controllers, which do not consider the voltage or current limitations of inverters and may cause responses that are not smooth. The proposed constrained predictive controllers in this article solve these problems by imposing constraints in the performance index for real-time optimization. Simplified numerical solutions that use Hildreth quadratic programming are used to identify active constraints, and then the control inputs are limited within their physical ranges. In addition, a simple external load estimator based on the Lyapunov function is designed to compensate for external load disturbances. Moreover, a current-slope-based rotor position estimation method, which does not require any extra hardware or high-frequency signal generators or occupy any dc-link voltage, is implemented to accurately estimate the rotor position and speed. The proposed method in this article improves the dynamic performance and reduces computational complexity when implemented in sensorless IPMSM drive systems. The proposed methods have quick transient responses, excellent load disturbance responses, good tracking capabilities, and good robustness. The sensorless IPMSM drive system proposed in this article is operated at full-range speeds, from 1 to 3000 r/min. Several simulations and experimental results validate the effectiveness of the proposed constrained predictive controllers.

28 May 2020 in Energies
Verified
Journal Article
Open access
PDF file
Tian-Hua LiuTian-Hua Liu
Tian-Hua Liu
Seerin AhmadSeerin Ahmad
Seerin Ahmad
Muhammad Syahril MubarokMuhammad Syahril Mubarok
Muhammad Syahril Mubarok
JCJia-You Chen
Jia-You Chen
A position observer and a predictive controller for sensorless synchronous-reluctance-motor (SynRM) drive systems are investigated in this paper. The rotor position observer, based on motor parameters, and stator currents and voltages, was designed and implemented to compute the rotor position. A pole-assignment technique was used to provide similar converging rates of the position observer, even when operated at different speeds. Furthermore, a predictive controller was designed to enhance performance. A digital-signal processor (DSP), TMS-320F-28335, was used as a computation tool. Several simulated results are provided and compared with the measured results. The measured results showed that the implemented predictive controller sensorless SynRM drive system could be adjusted from 30 to 1800 rpm with satisfactory performance, including quicker and better tracking responses, and a lower speed drop than that of a proportional-integral (PI) controller.

27 August 2020 in Energies
Verified
Journal Article
Open access
PDF file
Muhammad Syahril MubarokMuhammad Syahril Mubarok
Muhammad Syahril Mubarok
Tian-Hua LiuTian-Hua Liu
Tian-Hua Liu
CTChung-Yuan Tsai
Chung-Yuan Tsai
ZWZuo-Ying Wei
Zuo-Ying Wei
This paper investigates the implementation of a wide-adjustable sensorless interior permanent magnet synchronous motor drive based on current deviation detection under space-vector modulation. A hybrid method that includes a zero voltage vector current deviation and an active voltage vector current deviation under space-vector pulse-width modulation is proposed to determine the rotor position. In addition, the linear transition algorithm between the two current deviation methods is investigated to obtain smooth speed responses at various operational ranges, including at a standstill and at different operating speeds, from 0 to 3000 rpm. A predictive speed-loop controller is proposed to improve the transient, load disturbance, and tracking responses for the sensorless interior permanent magnet synchronous motor (IPMSM) drive system. The computations of the position estimator and control algorithms are implemented by using a digital signal processor (DSP), TMS-320F-2808. Several experimental results are provided to validate the theoretical analysis.

5 March 2021 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
Tian-Hua LiuTian-Hua Liu
Tian-Hua Liu
Muhammad Syahril MubarokMuhammad Syahril Mubarok
Muhammad Syahril Mubarok
DHDevi Hendriyono
Devi Hendriyono
SSSuwarno Suwarno
Suwarno Suwarno
The surface permanent magnet synchronous motor (SPMSM) drive system has been widely used in the industry due to its high power density, high efficiency and easy to control. nature The author proposes a speed‐loop frequency‐adaptive periodic controller and a current‐loop optimal harmonic periodic controller for a fault‐tolerant SPMSM drive system, including normal operating conditions and faulty operating conditions. The faulty conditions consist of an insulated gate bipolar transistor (IGBT) open‐circuit and an IGBT short‐circuit. A digital signal processor, TMS‐320F‐2808, manufactured by Texas Instruments, is used as a control centre to execute the proposed fault‐detection, fault‐diagnosis, frequency‐adaptive and optimal harmonic periodic control algorithms. Experimental results show the proposed advanced periodic controllers can provide better performance than the proportional integral controller and the classic periodic controller, including transient responses, load disturbance responses, and tracking responses under normal and faulty conditions.