The paper presents results of research conducted on a batch of additively manufactured individualized openwork wrist–hand orthoses made of thermoplastics and designed automatically based on 3D-scanned geometry of a given patient. The aim of the work was to establish an automated design process and find a reliable set of parameters for rapid and affordable manufacturing of usable orthoses on popular 3D printers, with little or no supervision of the process. The paper presents motivations, methodology of automated design, plan of manufacturing and testing, the obtained results in terms of process stability, fit and assessment by patient and strength of the obtained orthoses. Almost 100 manufacturing processes of ready-to-use orthosis parts were carried out in a controlled environment and their results were analyzed thoroughly. The results are promising, as most of the obtained products fulfil the strength criteria, although not all of them meet the economic criteria. As a result, a recommended set of process parameters was determined. These parameters were included in a prototype of the automated design and in a production system developed by the authors.

This paper presents the results of experiments conducted on a batch of additively manufactured customized prosthetic sockets for upper limbs, made of thermoplastics and designed automatically on the basis of a 3D-scanned limb of a 3-year-old patient. The aim of this work was to compare sockets made of two different materials—rigid PLA and elastic TPE. Two distinct socket designs with various mounting systems were prepared. To find a reliable set of parameters for cheap and stable manufacturing of usable prostheses using 3D printers, realizing the fused deposition modeling (FDM) process, sets of sockets were manufactured with various process parameters. This paper presents the methodology of the design, the plan of the experiments and the obtained results in terms of process stability, fit and assessment by patient, as well as strength of the obtained sockets and their measured surface roughness. The results are promising, as most of the obtained products fulfil the strength criteria, although not all of them meet the fitting and use comfort criteria. As a result, recommendations of materials and process parameters were determined. These parameters were included in a prototype of the automated design and production system developed by the authors, and prostheses for several other patients were manufactured.

The aim of the study was to compare two types of mandible reconstructive operations with scapula and fibula free flaps: procedures with 3-D models from thermoplastic materials and conventional planning surgeries. 8 patients were treated due to an advanced oral cavity squamous cell carcinoma. In four patients with a mandibular defect, a physical 3-D model consisting of the reconstructed and unaffected sites was prepared for a reconstruction protocol. The 3-D models were designed based to high resolution CT scans. Assessment of comparative functionality (stability of junction, mobility, mastication ability) and cosmetics was examined in both groups, following a 8 weeks healing period with better results in group with 3D model. 3-D models for mandible and donor bones allow to obtain better functionality of restored mandible in comparison to the traditional method also significantly decreases time of the operation and allows to achieve the desired shape and esthetic effect within the 1/3 of the lower face.

Growing age and different conditions often require the replacement of orthoses, and FDM-based 3D printing can produce them quickly with less investment. In today’s market for orthotics, these characteristics are highly desired. Therefore, this study is fully focused on the optimization and strength analysis of FDM 3D-printed ankle–foot orthoses (AFO) fabricated using PLA and PLA reinforced with carbon fiber (PLA-C). An increase in ankle plantar-flexor force can be achieved by reinforcing thermoplastic AFOs with CFs. Specially designed mechanical strength tests were conducted at the UTM to generate force–displacement curves for stored elastic energy and fracture studies. The mechanical behavior of both AFOs was predicted with the help of an FEA. The model predictions were validated by comparing them with mechanical strength testing conducted under the same loading and boundary conditions as the FEA. In both the prediction and experimental analysis, the PLA-C-based AFOs were stiffer and could withstand greater loads than the PLA-based AFOs. An area of high stress in the simulation and a fracture point in experimentation were both found at the same location. Furthermore, these highly accurate models will allow the fabrication of AFOs to be improved without investing time and resources on trials.