This work proposes the use of a dielectric barrier discharge (DBD) reactor operating at atmospheric pressure (AP) using air and sub-atmospheric pressure (SAP) using air or argon to treat polyamide 6.6 (PA6.6) fabrics. Here, plasma dosages corresponding to 37.5 kW·min·m−2 for AP and 7.5 kW·min·m−2 for SAP in air or argon were used. The hydrophilicity aging effect property of untreated and DBD-treated PA6.6 samples was evaluated from the apparent contact angle. The surface changes in physical microstructure were studied by field emission scanning electron microscopy (FE-SEM). To prove the changes in chemical functional groups in the fibers, Fourier transform infrared spectroscopy (FTIR) was used, and the change in surface bonds was evaluated by energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). In addition, the whiteness effect was investigated by the color spectrophotometry (Datacolor) technique. The results showed that the increase in surface roughness by the SAP DBD treatment contributed to a decrease in and maintenance of the hydrophilicity of PA6.6 fabrics for longer. The SAP DBD in air treatment promoted an enhancement of the aging effect with a low plasma dosage (5-fold reduction compared with AP DBD treatment). Finally, the SAP DBD treatment using argon functionalizes the fabric surface more efficiently than DBD treatments in air.
O ensino de física necessita de novas estratégias tanto no ambiente da sala de aula quanto nos baseados na internet, já que o público alvo que chega às escolas em todos os níveis vem com outras demandas e está sujeito a todo tempo e lugar a esse bombardeio de inovações que surgem a cada dia. É necessário portanto, testar, validar novas metodologias e reorganizar conteúdos, bem como qualificar todos os “atores” que hoje trabalham no ensino e se preocupam com o processo de ensino e aprendizagem. Neste sentido, esse trabalho apresenta um estudo da aplicação da metodologia denominada Aprendizado Híbrido (Blended Learning).