Jorge R. Costa

Prof. Jorge R. Costa

Iscte - Instituto Universitário de Lisboa
orcid

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 October 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Open access
PNParinaz Naseri
Parinaz Naseri
SMSérgio Matos
Sérgio Matos
Jorge R. CostaJorge R. Costa
Jorge R. Costa
Carlos A. FernandesCarlos A. Fernandes
Carlos A. Fernandes
Nelson J. G. FonsecaNelson J. G. Fonseca
Nelson J. G. Fonseca
Many wireless communication applications such as satellite communications use circularly-polarized (CP) signals, with the requirement for easy switching of the polarization sense between up-link and down-link. Specifically, in satellite communications, the trend is also to move to higher frequencies and integrate the receiving and transmitting antennas in one dual-band terminal. However, these simultaneous demands make the design and fabrication of the composing parts very challenging. We propose here a dual-band dual-linear to circular polarization converter that works in transmission mode. The working principle of this polarizer is explained through an example for Ka-band satellite communications at 19.7-20.2 GHz and 29.5-30 GHz. The LP-to-CP converter is a single panel composed of identical unit-cells with thickness of only 1.05 mm and size of 5.3 mm × 5.3 mm. Due to its operation in transmission mode, the polarizer can be combined with a simple dual-band dual-LP antenna to obtain the desired dual-band dual-CP single antenna. However, the unique property of this polarizer is yet the fact that it converts a given LP wave, e.g. x-polarization, to orthogonal CP waves at the two non-adjacent frequency bands, e.g. LHCP at lower band and RHCP at higher band. The polarizer is tested both with 20 GHz and with 30 GHz LP rectangular horns to illuminate a dual-band transmit-array (TA) to obtain wide-angle steering of CP beams. The performance of the polarizer and its association with the TA is evaluated through simulation and measurements. We also present design guidelines for this type of polarizer.

7 February 2008 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MSMario Silveirinha
Mario Silveirinha
Carlos A. FernandesCarlos A. Fernandes
Carlos A. Fernandes
Jorge R. CostaJorge R. Costa
Jorge R. Costa
We develop a homogenization model to characterize textured surfaces formed by a periodic arrangement of thin metallic pins attached to a conducting ground plane: the ldquoFakir's bed of nailsrdquo substrate. It is demonstrated that the textured surface can be accurately modeled using a dielectric function, provided spatial dispersion effects are considered as well as additional boundary conditions. We derive closed analytical formulas for the reflection coefficient, and for the dispersion characteristic of the surfaces waves. In addition, it is demonstrated that the artificial substrate may mimic almost exactly the behavior of an ideal impedance surface boundary, and that the only physical factor that may limit this remarkable property is the skin depth of the metal. The reported results are supported by full wave simulations as well as by experimental data.

1 October 2015 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
ELEduardo B. Lima
Eduardo B. Lima
SMSérgio Matos
Sérgio Matos
Jorge R. CostaJorge R. Costa
Jorge R. Costa
Carlos A. FernandesCarlos A. Fernandes
Carlos A. Fernandes
NFNelson J. G. Fonseca
Nelson J. G. Fonseca
A simple mechanical beam steering antenna concept is proposed for ground mobile terminals of Ka-band satellite and high altitude platform (HAP) providing broadband access services. The wide-angle elevation beam steering is achieved by in-plane translation of a thin offset flat lens in front of a stationary primary feed while full azimuth coverage is obtained by simple 360° rotation of the lens. A new strategy is also proposed to reduce the effective F/D of the focusing system and consequently the total antenna height without increasing beam distortion: a second small flat lens is added on top of the primary feed to create a virtual focus located well below the feed phase center. The challenge is to conciliate high gain both with wide beam scanning and reduced antenna height. Design rules are presented for this antenna concept along with a 27.3-dBi gain fabricated example for the up-link Ka-band (29.5-30 GHz), with circular polarization, 0° to 50° elevation scan, better than 2.8-dB scan loss and an effective F/D of only 0.55. Both lenses are 3.35-mm thick, formed by a suitable assembly of phase shifting unit cells with less than 0.4 dB of transmission loss in simulation. The main lens dimensions are 195 mm × 145 mm and its weight is 215 g. Total antenna height, including the feed is 84 mm.

9 May 2017 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Open access
SMSérgio Matos
Sérgio Matos
ELEduardo B. Lima
Eduardo B. Lima
JSJoana S. Silva
Joana S. Silva
Jorge R. CostaJorge R. Costa
Jorge R. Costa
Carlos A. FernandesCarlos A. Fernandes
Carlos A. Fernandes
JMJuan R. Mosig
Juan R. Mosig
Transmit array design is more challenging for dual-band operation than for single band, due to the independent 360° phase wrapping jumps needed at each band when large electrical length compensation is involved. This happens when aiming at large gains, typically above 25 dBi with beam scanning and F/D ≤ 1. No such designs have been reported in the literature. A general method is presented here to reduce the complexity of dual-band transmit array design, valid for arbitrarily large phase error compensation and any band ratio, using a finite number of different unit cells. The procedure is demonstrated for two offset transmit array implementations operating in circular polarization at 20 GHz(Rx) and 30 GHz(Tx) for Ka-band satellite-on-the-move terminals with mechanical beam-steering. An appropriate set of 30 dual-band unit cells is developed with transmission coefficient greater than -0.9 dB. The full-size transmit array is characterized by full-wave simulation enabling elevation beam scanning over 0°-50° with gains reaching 26 dBi at 20 GHz and 29 dBi at 30 GHz. A smaller prototype was fabricated and measured, showing a measured gain of 24 dBi at 20 GHz and 27 dBi at 30 GHz. In both cases, the beam pointing direction is coincident over the two frequency bands, and thus confirming the proposed design procedure.

4 August 2009 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Jorge R. CostaJorge R. Costa
Jorge R. Costa
ELEduardo B. Lima
Eduardo B. Lima
Carlos A. FernandesCarlos A. Fernandes
Carlos A. Fernandes
This paper presents a new concept of steerable beam antenna composed by a dielectric lens which pivots in front of a single stationary moderate gain feed. The lens not only allows steering mechanically the beam in elevation and full azimuth, but further increases the gain up to 21 dBi. The solution is broadband, including the entire international unlicensed spectrum from 57 GHz to 66 GHz. A fabricated prototype shows the possibility of tilting the beam from - 45deg to + 45deg for all azimuths with gain scan loss below 1.1 dB and radiation efficiency above 95%. The arrangement is very simple, it does not require rotary joints, it is low cost and compact, lens plus feed volume being of the order of 3 times 3 times 3 cm3 with lens weight less than 10 g.

11 March 2014 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
AKAsimina Kiourti
Asimina Kiourti
Jorge R. CostaJorge R. Costa
Jorge R. Costa
Carlos A. FernandesCarlos A. Fernandes
Carlos A. Fernandes
KNKonstantina S. Nikita
Konstantina S. Nikita
The design of a new miniature broadband implantable antenna and a dual-band on-body antenna are presented along with the transmission performance between the two. The former and latter antennas are intended for integration into implantable medical devices (IMDs) and on-body repeaters, respectively. The on-body repeater antenna favors the use of very low power IMDs. The on-body repeater receives low power data from an IMD (MedRadio band, 401-406 MHz) and retransmits it to remote devices placed further apart (ISM band, 2400-2480 MHz ). The MedRadio implantable antenna maintains miniature size (399 mm 3 ), and exhibits two close resonances which increase the -10 dB bandwidth inside muscle tissue (87 MHz). The on-body antenna is relatively small (6720 mm 3 ), and exhibits dual resonances in the MedRadio and ISM bands. Assuming a typical arm implantation scenario and an on-body receiver sensitivity of -75 dBm, the proposed configuration is found to enable reduction of the IMD power by a factor of 100. Patient safety and tolerance to electromagnetic interference are, thus, preserved, and lifetime of the IMD is increased. The setup is, finally, shown to be robust to antenna misalignment and polarization rotation.