9 October 2018 in IEEE Transactions on Antennas and Propagation
Many wireless communication applications such as satellite communications use circularly-polarized (CP) signals, with the requirement for easy switching of the polarization sense between up-link and down-link. Specifically, in satellite communications, the trend is also to move to higher frequencies and integrate the receiving and transmitting antennas in one dual-band terminal. However, these simultaneous demands make the design and fabrication of the composing parts very challenging. We propose here a dual-band dual-linear to circular polarization converter that works in transmission mode. The working principle of this polarizer is explained through an example for Ka-band satellite communications at 19.7-20.2 GHz and 29.5-30 GHz. The LP-to-CP converter is a single panel composed of identical unit-cells with thickness of only 1.05 mm and size of 5.3 mm × 5.3 mm. Due to its operation in transmission mode, the polarizer can be combined with a simple dual-band dual-LP antenna to obtain the desired dual-band dual-CP single antenna. However, the unique property of this polarizer is yet the fact that it converts a given LP wave, e.g. x-polarization, to orthogonal CP waves at the two non-adjacent frequency bands, e.g. LHCP at lower band and RHCP at higher band. The polarizer is tested both with 20 GHz and with 30 GHz LP rectangular horns to illuminate a dual-band transmit-array (TA) to obtain wide-angle steering of CP beams. The performance of the polarizer and its association with the TA is evaluated through simulation and measurements. We also present design guidelines for this type of polarizer.
24 February 2021 in IEEE Transactions on Antennas and Propagation
The synthesis of a metasurface exhibiting a specific set of desired scattering properties is a time-consuming and resource-demanding process, which conventionally relies on many cycles of full-wave simulations. It requires an experienced designer to choose the number of metallic layers, the scatterer shapes and dimensions, and the type and the thickness of the separating substrates. In this article, we propose a generative machine learning (ML)-based approach to solve this one-to-many mapping and automate the inverse design of dual- and triple-layer metasurfaces. Using this approach, it is possible to solve optimization problems with single or more constraints by synthesizing thin structures composed of potentially brand-new scatterer designs, in cases where the interlayer coupling between the layers is nonnegligible and synthesis by traditional methods becomes cumbersome. Various examples to provide specific magnitude and phase responses of x- and y-polarized scattering coefficients across a frequency range as well as bounded responses for different metasurface applications are presented to verify the practicality of the proposed method.
14 February 2020 in IEEE Transactions on Antennas and Propagation
Reflectarrays (RAs) offer low-cost and low-profile solutions that are polarization and frequency selective. These features augment their capabilities for point-to-point communications compared to conventional reflectors. Here, a dual-band dual-circularly polarized (CP) RA that can radiate independently-shaped beams in the desired directions for each polarization in each band is proposed. The RA is composed of a dual-band dual-linearly polarized (LP) RA and a dual-band LP-to-CP polarizer. The proposed RA can be employed to reduce the number of the required apertures for a four-color multiple spot beam coverage implemented using a single-feed-per-beam configuration from four to two. The underlying unit cell of the proposed RA is designed for 18.3-18.8 GHz and 27.0-27.5 GHz. It provides a 323° phase shift in the lower band and 381° phase shift in the higher band while maintaining a cross-polarization level better than 15 dB in both bands, and excellent decoupling between the two bands. An offset-fed RA is designed, fabricated, and measured.
29 December 2021 in IEEE Transactions on Antennas and Propagation
Electromagnetic metasurface (EMMS) design based on far-field (FF) constraints without the complete knowledge of the fields on both sides of the metasurface is typically a time-consuming and iterative process, which relies heavily on heuristics and ad hoc methods. This article proposes an end-to-end systematic and efficient approach where the designer inputs high-level FF constraints, such as nulls, sidelobe levels, and main beam level(s), and a three-layer nonuniform passive, lossless, and omega-type bianisotropic EMMS design to satisfy them is returned. The surface parameters to realize the FF criteria are found using the alternating direction method of multipliers on a homogenized model derived from the method of moments (MoM). This model incorporates edge effects of the finite surface and intercell mutual coupling in the inhomogeneous impedance sheet. Optimization through the physical unit cell space integrated with machine-learning-based surrogate models is used to realize the desired surface parameters from physical meta-atom (or unit cell) designs. Two passive lossless examples with different feeding systems and FF constraints are shown to demonstrate the effectiveness of this method.
12 December 2016 in IEEE Antennas and Wireless Propagation Letters
A novel antenna-filter-antenna-based asymmetric unit cell suitable for transmit-array (TA) is proposed in this letter. This unit cell converts a clockwise circular-polarized (CP) wave to counterclockwise CP with less than 0.5 dB insertion loss at 20.5 GHz, while its rotation provides up to 360° continuous phase shift in the transmitted wave. Hence, a 14 × 14 array of the proposed unit cell is fabricated and placed in front of a CP feed antenna. Placing the TA leads to a 9.5-dBi increase in the gain of the feed, and it redirects the beam to -15° off broadside. The axial ratio of the whole system is close to 2 dB. Therefore, this transmit-array can be used for fixed and/or steerable high-gain radiations for satellite communication in Ka-band.
9 January 2020 in IEEE Transactions on Antennas and Propagation
The working principle of a thin dual-band dual-linear to circular polarizer is presented here. This polarizer not only converts incident linearly polarized (LP) waves to circularly polarized (CP) waves in two frequency bands, but it also reverses the handedness of each signal. The electromagnetic behavior of the cell is carefully analyzed and two equivalent circuit models (ECMs) are presented to model the responses of the cell to linearly-polarized waves at normal incidence. The ECMs show how utilizing interlayer coupling can be leveraged to achieve reversed CP senses in two bands using a compact design. Analytical formulas are presented to provide initial values of the ECM components including the mutual coupling inductances. We present measurement results that agree well with the full-wave simulation and the ECM results, thus validating the proposed ECM model.