Many wireless communication applications such as satellite communications use circularly-polarized (CP) signals, with the requirement for easy switching of the polarization sense between up-link and down-link. Specifically, in satellite communications, the trend is also to move to higher frequencies and integrate the receiving and transmitting antennas in one dual-band terminal. However, these simultaneous demands make the design and fabrication of the composing parts very challenging. We propose here a dual-band dual-linear to circular polarization converter that works in transmission mode. The working principle of this polarizer is explained through an example for Ka-band satellite communications at 19.7-20.2 GHz and 29.5-30 GHz. The LP-to-CP converter is a single panel composed of identical unit-cells with thickness of only 1.05 mm and size of 5.3 mm × 5.3 mm. Due to its operation in transmission mode, the polarizer can be combined with a simple dual-band dual-LP antenna to obtain the desired dual-band dual-CP single antenna. However, the unique property of this polarizer is yet the fact that it converts a given LP wave, e.g. x-polarization, to orthogonal CP waves at the two non-adjacent frequency bands, e.g. LHCP at lower band and RHCP at higher band. The polarizer is tested both with 20 GHz and with 30 GHz LP rectangular horns to illuminate a dual-band transmit-array (TA) to obtain wide-angle steering of CP beams. The performance of the polarizer and its association with the TA is evaluated through simulation and measurements. We also present design guidelines for this type of polarizer.

This paper presents a general overview of substrate integrated transmission lines, from the perspective of historical background and progress of guided-wave structures and their impacts on the development of microwave circuits and integration solutions. This is highlighted through a technology roadmap involving the categorized five generations of microwave circuits. In particular, the substrate integration technologies are reviewed and discussed with focus on technical features, design highlights, component developments, structures evolution, and systems integration. A number of examples are presented to showcase some of the selected milestone research and development activities and accomplishments in connection with substrate integrated transmission line technologies, with particular focus on substrate integrated waveguide (SIW) techniques. Practical applications and industrial interests are also presented with key references and technical results, which show more and more product developments in the end-user sectors. It can be found that the popularity of SIW techniques is closely related to the achieved seamless integration of planar and non-planar structures into a unified design space, thereby allowing the possibility of combining major advantages of all the structures while alleviating their potential drawbacks. The future perspectives of the substrate integration technology are discussed through five major research directions, which suggest potential impacts in the development of future generations of circuits and systems such as system-on-substrate (SoS).

Multi-beam antennas are critical components in future terrestrial and non-terrestrial wireless communications networks. The multiple beams produced by these antennas will enable dynamic networking of various terrestrial, airborne and space-borne network nodes. As the operating frequency increases to the high millimeter wave (mmWave) and terahertz (THz) bands for beyond 5G (B5G) and sixth-generation (6G) systems, quasi-optical techniques are expected to become dominant in the design of high gain multi-beam antennas. This paper presents a timely overview of the mainstream quasi-optical techniques employed in current and future multi-beam antennas. Their operating principles and design techniques along with those of various quasi-optical beamformers are presented. These include both conventional and advanced lens and reflector based configurations to realize high gain multiple beams at low cost and in small form factors. New research challenges and industry trends in the field, such as planar lenses based on transformation optics and metasurface-based transmitarrays, are discussed to foster further innovations in the microwave and antenna research community.

To support the ever-increasing demand on connectivity and datarates, multiple beam antennas are identified as a critical technology for the fifth generation (5G), the sixth generation (6G) and more generally beyond 5G (B5G) wireless communication links in both terrestrial networks (TNs) and non-terrestrial networks (NTNs). To reduce the cost and power consumption, there is a marked industrial interest in adopting analogue multiple beam antenna array technology. A key sub-system in many of such antenna arrays is the circuit type multiple beamforming network (BFN). This has led to a significantly renewed interest in and new technological developments of Butler matrices, Blass matrices, and Nolen matrices as well as hybrid structures, mostly at millimeter-wave frequencies. To the best of the authors’ knowledge, no comprehensive analysis and comparison of circuit type multiple BFNs have been properly reported with focus on 5 G and 6 G applications to date. In this paper, the principle of operation, design, and implementation of different circuit type multiple BFNs are discussed and compared. The suitability of these sub-systems for 5 G and B5G antenna arrays is reviewed. Major technology and research challenges are highlighted. It is expected that this review paper will facilitate further innovation and developments in this important field.

Transmit array design is more challenging for dual-band operation than for single band, due to the independent 360° phase wrapping jumps needed at each band when large electrical length compensation is involved. This happens when aiming at large gains, typically above 25 dBi with beam scanning and F/D ≤ 1. No such designs have been reported in the literature. A general method is presented here to reduce the complexity of dual-band transmit array design, valid for arbitrarily large phase error compensation and any band ratio, using a finite number of different unit cells. The procedure is demonstrated for two offset transmit array implementations operating in circular polarization at 20 GHz(Rx) and 30 GHz(Tx) for Ka-band satellite-on-the-move terminals with mechanical beam-steering. An appropriate set of 30 dual-band unit cells is developed with transmission coefficient greater than -0.9 dB. The full-size transmit array is characterized by full-wave simulation enabling elevation beam scanning over 0°-50° with gains reaching 26 dBi at 20 GHz and 29 dBi at 30 GHz. A smaller prototype was fabricated and measured, showing a measured gain of 24 dBi at 20 GHz and 27 dBi at 30 GHz. In both cases, the beam pointing direction is coincident over the two frequency bands, and thus confirming the proposed design procedure.

Satellite, fifth generation (5G), and sixth generation (6G) mobile communication systems operating at micro- and millimeter wave frequencies are an essential pillar in advanced network architectures for high-throughput low latency services. The decisive factors for this current development were the significant technological advances accomplished over the last two decades, which meanwhile enable highly integrated, feature-rich, and cost-effective realizations of complete phased array transceiver topologies. Motivated through the today's trend for heterogeneous constellation types to provide truly global coverage, this contribution reviews the current state-of-the-art of electronically steerable antennas for terrestrial and non-terrestrial communication systems up to 100 GHz. First, the potential benefits and limitations of the most relevant technologies are contrasted and put into context with recent system architectures for adaptive beamforming. Their operating principles along with various experimental implementation and achievements providing advanced capabilities such as multi-band/multi-beam operation, polarization agility, and wide-angle scanning are thoroughly presented. Particular emphasis is laid on the review of direct radiating arrays, quasi-optical antenna configurations, and metasurface-based antennas.