With the implementation of the Internet of Things, the agricultural domain has become data-driven, allowing for well-timed and cost-effective farm management while remaining environmentally sustainable. Thus, the incorporation of Internet of Things in the agricultural domain is the need of the hour for developing countries whose gross domestic product primarily depends on the farming sector. It is worth highlighting that developing nations lack the infrastructure for precision agriculture; therefore, it has become necessary to come up with a methodological paradigm which can accommodate a complete model to connect ground sensors to the compute nodes in a cost-effective way by keeping the data processing limitations and constraints in consideration. In this regard, this review puts forward an overview of the state-of-the-art technologies deployed in precision agriculture for soil assessment and pollutant monitoring with respect to heavy metal in agricultural soil using various sensors. Secondly, this manuscript illustrates the processing of data generated from the sensors. In this regard, an optimized method of data processing derived from cloud computing has been shown, which is called edge computing. In addition to this, a new model of high-performance-based edge computing is also shown for efficient offloading of data with smooth workflow optimization. In a nutshell, this manuscript aims to open a new corridor for the farming sector in developing nations by tackling challenges and providing substantial consideration.

With the advent of the industrial revolution 4.0, the goal of the manufacturing industry is to produce a large number of products in relatively less time. This study applies the Taguchi L27 orthogonal array methodological paradigm along with response surface design. This work optimizes the process parameters in the turning of Aluminum Alloy 7075 using a Computer Numerical Control (CNC) machine. The optimal parameters influenced the rate of metal removal, the roughness of the machined surface, and the force of cutting. This experimental investigation deals with the optimization of speed (800 rpm, 1200 rpm, and 1600 rpm) and feed (0.15, 0.20, and 0.25 mm/rev) in addition to cutting depth (1.0, 1.5, and 2.0 mm) on the turning of Aluminum 7075 alloy in a CNC machine. The outcome in terms of results such as the removal rate of material (maximum), roughness on the machined surface (minimum), along with cutting force (least amount) were improved by the L27 array Taguchi method. There were 27 specimens of Al7075 alloy produced as per the array, and the corresponding responses were measured with the help of various direct contact and indirect contact sensors. Results were concluded all the way through diagrams of main effects in favor of signal-to-noise ratios and diagrams of surfaces with contour diagrams for various combinations of responses.

Advanced remote sensing technologies have undoubtedly revolutionized palm oil industry management by bringing business and environmental benefits on a single platform. It is evident from the ongoing trend that remote sensing using satellite and aerial data is able to provide precise and quick information for huge palm oil plantation areas using high-resolution image processing, which is also recognized by the certification agencies, i.e., the Roundtable on Sustainable Palm Oil (RSPO) and ISCC (International Sustainability and Carbon Certification). A substantial improvement in the palm oil industry could be attained by utilizing the latest Geo-information tools and technologies equipped with AI (Artificial Intelligence) algorithms and image processing, which could help to identify illegal deforestation, tree count, tree height, and the early detection of diseased leaves. This paper reviews some of the latest technologies equipped with remote sensing, AI, and image processing for managing the palm oil plantation. This manuscript also highlights how the distress in the current palm oil industry could be handled by mentioning some of the improvised monitoring systems for palm oil plantation that could in turn increase the yield of palm oil. It is evident from the proposed review that the accuracy of AI algorithms for palm oil detection depends on various factors such as the quality of the training data, the design of the neural network, and the type of detection task. In general, AI models have achieved high accuracy in detecting palm oil tree images, with some studies reporting accuracy levels up to 91%. However, it is important to note that accuracy can still be affected by factors such as variations in lighting conditions and image resolution. Nonetheless, with any AI model, the accuracy of algorithms for palm oil tree detection can be improved by collecting more diverse training data and fine-tuning the model.

Rising greenhouse gas emissions stemming from fossil fuel-driven vehicles are causing damage to the environment. To counteract this, one solution is the adoption of electric vehicles (EV) for transportation requirements. In this regard, one category of EVs that requires special attention is light electric vehicle (LEV), mainly because of their wide potential in public transportation—especially in developing countries. To realise widespread adoption of LEVs for this purpose, it is imperative to make their charging systems more robust. Consequently, the subject of LEV charging has gained considerable traction, and numerous research works have been reported on this subject in recent years. Hence, this paper aims to chronicle recent research developments on LEV charging techniques, by placing special attention on DC-DC converter topologies used in both on-board and off-board chargers. This review explores recent LEV charger DC-DC converters in literature by segregating them into isolated and non-isolated topologies. Lastly, this work explores challenges and emerging trends in LEV charging, which can potentially be explored by researchers in the future.

In the present investigation, the non-recrystallization temperature (T_NR) of niobium-microalloyed steel is determined to plan rolling schedules for obtaining the desired properties of steel. The value of T_NR is based on both alloying elements and deformation parameters. In the literature, T_NR equations have been developed and utilized. However, each equation has certain limitations which constrain its applicability. This study was completed using laboratory-grade low-carbon Nb-microalloyed steels designed to meet the API X-70 specification. Nb- microalloyed steel is processed by the melting and casting process, and the composition is found by optical emission spectroscopy (OES). Multiple-hit deformation tests were carried out on a Gleeble^® 3500 system in the standard pocket-jaw configuration to determine T_NR. Cuboidal specimens (10 (L) × 20 (W) × 20 (T) mm³) were taken for compression test (multiple-hit deformation tests) in gleeble. Microstructure evolutions were carried out by using OM (optical microscopy) and SEM (scanning electron microscopy). The value of T_NR determined for 0.1 wt.% niobium bearing microalloyed steel is ~ 951 °C. Nb- microalloyed steel rolled at T_NR produce partially recrystallized grain with ferrite nucleation. Hence, to verify the TNR value, a rolling process is applied with the finishing rolling temperature near TNR (~951 °C). The microstructure is also revealed in the pancake shape, which confirms T_NR.