Carbon monoxide (CO) is ubiquitous in the environment. In this literature review, the biological CO transformations in ecosystems were summarized as an inspiration for the biorefinery industry. Specifically, for the first time, information about CO fate in soil, water, and the atmosphere was collected, and CO impact on plants, animals, and humans was discussed. The review also addresses the need to develop new solutions to implementing circular bioeconomy and highlights the potential of CO use in biologically mediated processes as an untapped valuable resource. Specific key areas of research were identified as 1) development of water-gas shift (WGS) bioreaction, 2) electricity production during bioelectrochemical syngas conversion (BESs), and 3) electro-fermentation (EF) as a source of added-value biochemicals and fuels.

Composting processes reduce the weight and volume of biowaste and produce products that can be used in agriculture (e.g., as fertilizer). Despite the benefits of composting, there are also problems such as odors and the emission of pollutants into the atmosphere. This research aimed to investigate the phenomenon of process gas (CO, CO₂, NO, O₂) evolution within a large-scale municipal composter. The effects of turning frequency and pile location (outdoor vs. indoors) on process gas and temperature spatial and temporal evolution were studied in six piles (37‒81 tons of initial weight) over a six-month period. The biowaste consisted of green waste and municipal sewage sludge. The chemical composition and temperature of process gases within four cross sections with seven sampling locations were analyzed weekly for ~7–8 weeks (a total of 1375 cross sections). The aeration degree, temperature, CO, CO_2, and NO concentration and their spatial and temporal distribution were analyzed. Final weight varied from 66% reduction to 7% weight gain. Only 8.2% of locations developed the desired chimney effect (utilizing natural buoyancy to facilitate passive aeration). Only 31.1% of locations reached thermophilic conditions (necessary to inactivate pathogens). Lower O₂ levels corresponded with elevated CO₂ concentrations. CO production increased in the initial composting phase. Winter piles were characterized by the lowest CO content. The most varied was the NO distribution in all conditions. The O₂ concentration was lowest in the central part of the pile, and aeration conditions were good regardless of the technological regime used. Turning once a week was sufficient overall. Based on the results, the most favorable recommended procedure is turning twice a week for the first two weeks, followed by weekly turning for the next two weeks. After that, turning can be stopped unless additional removal of moisture is needed. In this case, weekly turning should continue until the process is completed. The size of the pile should follow the surface-to-volume ratio: <2.5 and <2 for cooler ambient conditions.

Carbon monoxide (CO), an air pollutant and a toxic gas to humans, can be generated during aerobic digestion of organic waste. CO is produced due to thermochemical processes, and also produced or consumed by cohorts of methanogenic, acetogenic, or sulfate-reducing bacteria. The exact mechanisms of biotic and abiotic formation of CO in aerobic digestion (particularly the effects of process temperature) are still not known. This study aimed to determine the temporal variation in CO concentrations during the aerobic digestion as a function of process temperature and activity of microorganisms. All experiments were conducted in controlled temperature reactors using homogeneous materials. The lab-scale tests with sterilized and non-sterilized mix of green waste, dairy cattle manure, sawdust (1:1:1 mass ratio) were carried out for 1 week at 10, 25, 30, 37, 40, 50, 60, 70°C to elucidate the biotic vs. abiotic effect. Gas concentrations of CO, O₂, and CO₂ inside the reactor were measured every 12 h. The CO concentrations observed for up to 30°C did not exceed 100 ppm v/v. For 50 and 60°C, significantly (p < 0.05) higher CO concentrations, reaching almost 600 ppm v/v, were observed. The regression analyses showed in both cases (sterile and non-sterile) a statistically significant effect (p < 0.05) of temperature on CO concentration, confirming that the increase in temperature causes an increase in CO concentration. The remaining factors (time, O₂, and CO₂ content) were not statistically significant (p > 0.05). A new polynomial model describing the effect of temperature, O₂, and CO₂ concentration on CO production during aerobic digestion of organic waste was formulated. It has been found that the proposed model for sterile variant had a better fit (R² = 0.86) compared with non-sterile (R² = 0.71). The model predicts CO emissions and could be considered for composting process optimization. The developed model could be further developed and useful for ambient air quality and occupational exposure to CO.

Composting is generally accepted as the sustainable recycling of biowaste into a useful and beneficial product for soil. However, composting processes can produce gases that are considered air pollutants. In this dataset, we summarized the spatial and temporal distribution of process gases (including rarely reported carbon monoxide, CO) generated inside full-scale composting piles. In total 1375 cross-sections were made and presented in 230 figures. The research aimed to investigate the phenomenon of gas evolution during the composting of biowaste depending on the pile turning regime (no turning, turning once a week, and turning twice a week) and pile location (outdoors, and indoors in a composting hall). The analyzed biowaste (a mixture of tree leaves and branches, grass clippings, and sewage sludge) were composted in six piles with passive aeration including additional turning at a municipal composting plant. The chemical composition and temperature of process gases within each pile were analyzed weekly for ~49–56 days. The variations in the degree of pile aeration (O₂ content), temperature, and the spatial distribution of CO, CO₂ and NO concentration during the subsequent measurement cycles were summarized and visualized. The lowest O₂ concentrations were associated with the central (core) part of the pile. Similarly, an increase in CO content in the pile core sections was found, which may indicate that CO is oxidized in the upper layer of composting piles. Higher CO and CO₂ concentrations and temperature were also observed in the summer season, especially on the south side of piles located outdoors. The most varied results were for the NO concentrations that occurred in all conditions. The dataset was used by the composting plant operator for more sustainable management. Specifically, the dataset allowed us to make recommendations to minimize the environmental impact of composting operations and to lower the risk of worker exposure to CO. The new procedure is as follows: turning of biowaste twice a week for the first two weeks, followed by turning once a week for the next two weeks. Turning is not necessary after four weeks of the process. The recommended surface-to-volume ratio of a compost pile should not exceed 2.5. Compost piles should be constructed with a surface-to-volume ratio of less than 2 in autumn and early spring when low ambient temperatures are common.

Advanced technologies call for composting indoors for minimized impact on the surrounding environment. However, enclosing compost piles inside halls may cause the accumulation of toxic pollutants, including carbon monoxide (CO). Thus, there is a need to assess the occupational risk to workers that can be exposed to CO concentrations > 300 ppm at the initial stage of the process. The objectives were to (1) develop a model of CO accumulation in the headspace of the bioreactor during organic waste composting and (2) assess the impact of headspace ventilation of enclosed compost. The maximum allowable CO level inside the bioreactor headspace for potential short-term occupational exposure up to 10 min was 100 ppm. The composting was modeled in the horizontal static reactor over 14 days in seven scenarios, differing in the ratio of headspace-to-waste volumes (H:W) (4:1, 3:1, 2:1, 1:1, 1:2, 1:3, 1:4). Headspace CO concentration exceeded 100 ppm in each variant with the maximum value of 36.1% without ventilation and 3.2% with the daily release of accumulated CO. The airflow necessary to maintain CO < 100 ppmv should be at least 7.15 m³·(h·Mg w.m.)⁻¹. The H:W > 4:1 and the height of compost pile < 1 m were less susceptible to CO accumulation.

There are insufficient data for the development of process design criteria for constructed wetlands systems based on submerged plants as a major treatment agent. The aim of the study was to evaluate the oxygen transfer capacity (OTC) of E. densa, in relation to wet plants’ mass (w.m.), and the influence of E. densa on the oxygen concentration and contaminants’ removal efficiency from municipal wastewater. The obtained oxygen concentration and temperature data allowed to calculate the OTC values (mg O₂·L⁻¹·h⁻¹), which had been related to wet plants’ mass unit (mg O₂·L⁻¹·h⁻¹·g w.m.⁻¹). The efficiency of wastewater treatment was determined in relation to initial wastewater content in the mixture of wastewater and tap water (0%, 25%, 50%, and 100%) during 3 days of the experiment duration. The simulation of day and night conditions was done by artificial lighting. Before and after finishing the second experiment, the COD, N_total, and P-PO₄ concentration were analyzed in wastewater solutions. The OTC ranged from 3.19 to 8.34 (mgO₂·L⁻¹·h⁻¹·g w.m.⁻¹), and the increase of OTC value was related to the increase of wet plant’s mass. The research showed that E. densa affected positively on the wastewater treatment efficiency, and the highest efficiency was achieved in 25% wastewater solution: 43.6% for COD, 52.9% for N_total, 14.9% for P-PO₄.