Benedikt Adelmann

Dr. Benedikt Adelmann


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 November 2014 in Micromachines
Verified
Journal Article
Open access
PDF file
FPFlorian Preusch
Florian Preusch
BABenedikt Adelmann
Benedikt Adelmann
Ralf HellmannRalf Hellmann
Ralf Hellmann
We report on high precision high speed micromachining of Al2O3 and AlN using pulsed near infrared fiber laser. Ablation thresholds are determined to be 30 J/cm2 for alumina and 18 J/cm2 for aluminum nitride. The factors influencing the efficiency and quality of 3D micromachining, namely the surface roughness, the material removal rate and the ablation depth accuracy are determined as a function of laser repetition rate and pulse overlap. Using a fluence of 64 J/cm², we achieve a material removal rate of up to 94 mm³/h in Al2O3 and 135 mm³/h in AlN for high pulse overlaps (89% and 84%). A minimum roughness of 1.5 μm for alumina and 1.65 μm for aluminum nitride can be accomplished for medium pulse overlaps (42% to 56%). In addition, ablation depth deviation of the micromachining process of smaller than 8% for alumina and 2% for aluminum nitride are achieved. Based on these results, by structuring exemplarily 3D structures we demonstrate the potential of high quality and efficient 3D micromachining using pulsed fiber laser.

1 May 2015 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Closed access
PDF file
BABenedikt Adelmann
Benedikt Adelmann
CNC. Ngo
C. Ngo
RHR. Hellmann
R. Hellmann

31 May 2017 in Applied Physics A
Verified
Journal Article
Closed access
PDF file
BABenedikt Adelmann
Benedikt Adelmann
RHR. Hellmann
R. Hellmann

14 December 2017 in IEEE Sensors Journal
Verified
Journal Article
Closed access
MSMax Schleier
Max Schleier
BABenedikt Adelmann
Benedikt Adelmann
CECemal Esen
Cemal Esen
Ralf HellmannRalf Hellmann
Ralf Hellmann
We report on an innovative algorithm for an InGaAs and Si photodiode based sensor system to detect incomplete cuts during high-power near infrared fiber laser cutting. Using such dual photodiode based sensor, the thermal radiation from the process zone is measured with the diode current being digitalized with a sampling rate of 20 kHz. The algorithm encompasses a normalization of the measured current, digital filtering and cross-correlation calculation of both filtered diode signals. This sensor approach allows us to successfully detect cut interruptions in a series of more than 100 cuts in stainless steel, mild steel and aluminum of different thicknesses with a type I and type II error of 0 %. The underlying physics of the detection scheme based on the changes of the dynamic melt flow in the cut kerf from a complete cut to an incomplete cut is discussed.

13 June 2016 in Applied Physics A
Verified
Journal Article
Closed access
PDF file
BABenedikt Adelmann
Benedikt Adelmann
Ralf HellmannRalf Hellmann
Ralf Hellmann

1 March 2016 in Applied Optics
Verified
Journal Article
Closed access
PDF file
BABenedikt Adelmann
Benedikt Adelmann
MSM. Schleier
M. Schleier
BNB. Neumeier
B. Neumeier
RHR. Hellmann
R. Hellmann
We report on a photodiode-based sensor system to detect cutting interruptions during laser cutting with a fiber laser. An InGaAs diode records the thermal radiation from the process zone with a ring mirror and optical filter arrangement mounted between a collimation unit and a cutting head. The photodiode current is digitalized with a sample rate of 20 kHz and filtered with a Chebyshev Type I filter. From the measured signal during the piercing, a threshold value is calculated. When the diode signal exceeds this threshold during cutting, a cutting interruption is indicated. This method is applied to sensor signals from cutting mild steel, stainless steel, and aluminum, as well as different material thicknesses and also laser flame cutting, showing the possibility to detect cutting interruptions in a broad variety of applications. In a series of 83 incomplete cuts, every cutting interruption is successfully detected (alpha error of 0%), while no cutting interruption is reported in 266 complete cuts (beta error of 0%). With this remarkable high detection rate and low error rate, the possibility to work with different materials and thicknesses in combination with the easy mounting of the sensor unit also to existing cutting machines highlight the enormous potential for this sensor system in industrial applications.