In this work, energy and exergy analyses are carried out for a combined cycle consisting of an organic Rankine cycle (ORC) and a liquefied natural gas (LNG) Rankine cycle for the recovery of low-grade heat sources and LNG cold energy. The effects of the turbine inlet pressure and the working fluid on the system performance are theoretically investigated. A modified temperature-enthalpy diagram is proposed, which can be useful to see the characteristics of the combined cycle, as well as the temperature distributions in the heat exchangers. Results show that the thermal efficiency increases with an increasing turbine inlet pressure and critical temperature of the working fluid. However, the exergy efficiency has a peak value with respect to the turbine inlet pressure, and the maximum exergy efficiency and the corresponding optimum turbine inlet pressure are significantly influenced by the selection of the working fluid. The exergy destruction at the condenser is generally the greatest among the exergy destruction components of the system.
The recently proposed organic flash cycle (OFC) has the potential for the efficient recovery of low-grade heat, mainly due to the reduction of irreversibilities in the heat input unit. In the present study, a modified OFC (OFCM) employing a two-phase expander (TPE) and regeneration is proposed and thermodynamic and optimization analysis on this cycle is conducted compared with the basic OFC (OFCB). Six substances are considered as the working fluids. Influences of flash temperature, source temperature, and working fluid are systemically investigated on the system performance. Results showed that OFCM is superior to OFCB in the aspects of power production, thermal, and second-law efficiencies.
The Kalina cycle (KC) has been considered one of the most efficient systems for harvesting low grade heat since its proposal and various modifications have been proposed. Recently, Kalina based power and cooling cogeneration cycles (KPCCCs) have attracted much attention and many studies have been conducted. In this paper, a cogeneration cycle of power and absorption refrigeration based on the Kalina cycle system 11 (KCS-11) is proposed. The cycle combines a KC and aqua-ammonia absorption refrigeration cycle (ABR) with once through configuration. Compared to the stand-alone KC, the proposed cycle showed significantly higher energy efficiency—as high as 60%—without the use of rectifier, superheater or subcooler. Parametric analysis showed that the ammonia fraction, separator pressure and source temperature have a significant impact on the system performance including mass flow rates, heat transfers, power generation, cooling capacity, energy efficiencies and optimum ammonia fraction for the maximum energy efficiency.
Gas turbine power can be augmented by overspray process which consists of inlet fogging and wet compression. In this study exergy analysis of the overspray process in gas turbine system is carried out with a non-equilibrium analytical modeling based on droplet evaporation and the second law of thermodynamics. This work focuses on the effects of system parameters such as pressure ratio, water injection ratio, and initial droplet diameter on exergetical performances including irreversibility and exergy efficiency of the process. The process performances are also estimated under the condition of saturated water injection ratio above which complete evaporation of injected water droplets within a compressor is not possible. The results show that the irreversibility increases but the saturated irreversibility decreases with increasing initial droplet diameter for a specified pressure ratio.
The Kalina flash cycle (KFC) is a novel, recently proposed modification of the Kalina cycle (KC) equipped with a flash vessel. This study performs a comparative analysis of the thermodynamic performance of KC and KFC utilizing low-grade heat sources. How separator pressure, flash pressure, and ammonia mass fraction affect the system performance is systematically and parametrically investigated. Dependences of net power and cycle efficiencies on these parameters as well as the mass flow rate, heat transfer rate and power production at the cycle components are analyzed. For a given set of separator pressure and ammonia mass fraction, there exists an optimum flash pressure making exergy efficiency locally maximal. For these pressures, which are higher for higher separator pressure and lower ammonia mass fraction, KFC shows better performance than KC both in net power and cycle efficiencies. At higher ammonia mass fraction, however, the difference is smaller. While the maximum power production increases with separator pressure, the dependence is quite weak for the maximum values of both efficiencies.
Recently power generation systems using ammonia-water binary mixtures as a working fluid have been attracting much attention for their efficient conversion of low-grade heat sources into useful energy forms. This paper presents the First and Second Law thermodynamic analysis for a heat recovery vapor generator (HRVG) of ammonia-water mixtures when the heat source is low-temperature energy in the form of sensible heat. In the analysis, key parameters such as ammonia mass concentration and pressure of the binary mixture are studied to investigate their effects on the system performance, including the effectiveness of heat transfer, entropy generation, and exergy efficiency. The results show that the ammonia concentration and the pressure of the mixture have significant effects on the system performance of the HRVG.