Gas-turbine cycles with high fogging compression could offer enhanced efficiency and low complexity. Whereas compression power and heat rates decrease when small amounts of water (up to 2% of air flow by mass) are injected at the machine inlet, increased injection amounts could allow implementation of regeneration, further decreasing the heat rate. In this study, an exergy analysis is carried out for two high-fogging cycles. The theoretical projections show that high-injection improves the efficiency from 47% at a pressure ratio of 6-55.5% at a pressure ratio of 22.
The Kalina flash cycle (KFC) is a novel, recently proposed modification of the Kalina cycle (KC) equipped with a flash vessel. This study performs a comparative analysis of the thermodynamic performance of KC and KFC utilizing low-grade heat sources. How separator pressure, flash pressure, and ammonia mass fraction affect the system performance is systematically and parametrically investigated. Dependences of net power and cycle efficiencies on these parameters as well as the mass flow rate, heat transfer rate and power production at the cycle components are analyzed. For a given set of separator pressure and ammonia mass fraction, there exists an optimum flash pressure making exergy efficiency locally maximal. For these pressures, which are higher for higher separator pressure and lower ammonia mass fraction, KFC shows better performance than KC both in net power and cycle efficiencies. At higher ammonia mass fraction, however, the difference is smaller. While the maximum power production increases with separator pressure, the dependence is quite weak for the maximum values of both efficiencies.
Recently power generation systems using ammonia-water binary mixtures as a working fluid have been attracting much attention for their efficient conversion of low-grade heat sources into useful energy forms. This paper presents the First and Second Law thermodynamic analysis for a heat recovery vapor generator (HRVG) of ammonia-water mixtures when the heat source is low-temperature energy in the form of sensible heat. In the analysis, key parameters such as ammonia mass concentration and pressure of the binary mixture are studied to investigate their effects on the system performance, including the effectiveness of heat transfer, entropy generation, and exergy efficiency. The results show that the ammonia concentration and the pressure of the mixture have significant effects on the system performance of the HRVG.
The Kalina cycle (KC) has been recognized as one of the most efficient conversion systems of low-grade heat sources. The Kalina flash cycle (KFC) is a recently proposed novel cycle which is equipped with an additional flash process to the KC. In this study, the exergy performance of KC and KFC driven by a low-grade heat source are investigated comparatively. The dependence of the exergy destruction at each component as well as the system’s exergy efficiency on ammonia concentration, separator pressure and, additionally, flash pressure for KFC, are systematically investigated. Results showed that KFC can be optimized with respect to flash pressure on the base of exergy efficiency, and the component where largest exergy destruction occurs varies for different separator pressure and ammonia fraction in both systems. It is also shown that the maxima of net power production and exergy efficiency in KFC with optimal flash pressure are superior to those in KC.
28 February 2020 in Transactions of the Korean hydrogen and new energy society